Server, Auslastung, Ram

Irgendwelche Probleme mit XAMPP für Linux? Dann ist hier genau der richtige Ort um nachzufragen.

Server, Auslastung, Ram

Postby chrigu99 » 06. January 2007 20:31

Hallo zusammen

Ich habe ein kleines Problem auf meinem Webserver (P4 3.2GHz, 2GB Ram, 440GB HD) auf welchem XAMPP und ein Mailserver auf qMail-Basis läuft:
Wenn der Server neu gestartet wird, verbraucht er ~ 300-400 MB Ram. Nun nach einer Weile steigert sich dies bis 1.2-1.8GHz verbrauchter Ram, was meiner Meinung nach für die Auslastung zu hoch ist. Auch ein Beenden des Webservers bringt kaum 200MB Besserung. Kann mir jemand sagen wie ich die wahrscheinlich toten Threads o.ä. auffinden und eliminieren kann? Oder andere Vorschläge betreffend der Problemlösung?

Besten Dank schon jetzt für Eure Hilfe!
Infos: XAMPP 1.5.4a, PHP5, 650'000 Klicks pro Monat

Grüsse Chris
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby deepsurfer » 06. January 2007 22:27

Ich schätze das du viel mit MySQL Abfragen arbeitest, da wäre es gut die Performance des MySQL Server über seine my.cnf zu optimieren.

Das selbe auch mal mit der PHP.INI machen sodass PHPrequests und parsings mehr spielraum haben (perfomance technisch) gesehen.
chirio Deep
Wie sagte einst der MCP aus Tron auf dem Bildschirm zu schreiben Pflegte
" ... end of communication ... "
User avatar
deepsurfer
AF Moderator
 
Posts: 6440
Joined: 23. November 2004 10:44
Location: Cologne
Operating System: Win-XP / Win7 / Linux -Debian

Postby chrigu99 » 07. January 2007 01:03

Danke schonmal für die Antwort! Ja, das ist so, ich arbeite sehr viel mit MySQL-Abfragen. Es ist auf jeder Seite mindestens eine Abfrage. Nun, könntest Du mir dabei behilflich sein? Oder gibt es eine gute Web-Referenz?

Beste GRüsse
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby chrigu99 » 07. January 2007 03:55

Die my.cnf und php.ini


my.cnf:

Code: Select all
# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /opt/lampp/var/mysql) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password   = your_password
port      = 3306
socket      = /opt/lampp/var/mysql/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port      = 3306
socket      = /opt/lampp/var/mysql/mysql.sock
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id   = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin


# Point the following paths to different dedicated disks
#tmpdir      = /tmp/      
#log-update    = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Comment the following if you are using InnoDB tables
skip-innodb
innodb_data_home_dir = /opt/lampp/var/mysql/
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = /opt/lampp/var/mysql/
innodb_log_arch_dir = /opt/lampp/var/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout



php.ini:

Code: Select all
[PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.


;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior.  In order for PHP to
; read it, it must be named 'php.ini'.  PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory.  The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple.  Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; |        bitwise OR
; &        bitwise AND
; ~        bitwise NOT
; !        boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
;  foo =         ; sets foo to an empty string
;  foo = none    ; sets foo to an empty string
;  foo = "none"  ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).


;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.
short_open_tag = On

; Allow ASP-style <% %> tags.
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
precision    =  12

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = Off

; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit.  You can enable output buffering during runtime by calling the output
; buffering functions.  You can also enable output buffering for all files by
; setting this directive to On.  If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = Off

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "ob_gzhandler", output will be
; transparently compressed for browsers that support gzip or deflate encoding.
; Setting an output handler automatically turns on output buffering.
output_handler =

; The unserialize callback function will called (with the undefind class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
;
; Note: output_handler must be empty if this is set 'On' !!!!
;
zlib.output_compression = Off

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; Whether to enable the ability to force arguments to be passed by reference
; at function call time.  This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend.  The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration.  You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = On

; Safe Mode
;
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = On

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =                        

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

; open_basedir, if set, limits all file operations to the defined directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file.
;
;open_basedir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here.  By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note:  If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv().  These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names.  This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <font color="??????"> would work.
highlight.string  = #CC0000
highlight.comment = #FF9900
highlight.keyword = #006600
highlight.bg      = #FFFFFF
highlight.default = #0000CC
highlight.html    = #000000


;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header).  It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time = 60     ; Maximum execution time of each script, in seconds
memory_limit = 24M      ; Maximum amount of memory a script may consume (8MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field.  Or each number up to get desired error
; reporting level
; E_ALL             - All errors and warnings
; E_ERROR           - fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often result
;                     from a bug in your code, but it's possible that it was
;                     intentional (e.g., using an uninitialized variable and
;                     relying on the fact it's automatically initialized to an
;                     empty string)
; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
;
; Examples:
;
;   - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE
;
;   - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
;   - Show all errors except for notices
;
error_reporting  =  E_ALL & ~E_NOTICE

; Print out errors (as a part of the output).  For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below).  Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = On

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed.  It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = Off

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; sourcelines.
ignore_repeated_source = Off

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
;html_errors = Off
 
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"

; String to output after an error message.
;error_append_string = "</font>"

; Log errors to specified file.
;error_log = filename

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog

; Warn if the + operator is used with strings.
warn_plus_overloading = Off


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC).  Registration is done from left to right, newer
; values override older values.
variables_order = "EGPCS"

; Whether or not to register the EGPCS variables as global variables.  You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data.  This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on;  Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = On

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information).  If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On

; Maximum size of POST data that PHP will accept.
post_max_size = 16M

; This directive is deprecated.  Use variables_order instead.
gpc_order = "GPC"

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = On

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off   

; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header.  To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2" 
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues.  The alternate is to use the
; cgi.force_redirect configuration below
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =

; Directory in which the loadable extensions (modules) reside.
;extension_dir = /opt/lampp/lib/php/extensions/no-debug-non-zts-20020429/
;extension_dir = /opt/lampp/lib/php/extensions/no-debug-non-zts-20040412/

; Whether or not to enable the dl() function.  The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers.  Left undefined, PHP turns this on by default.  You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution.  Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client.  This allows IIS to define the
; security context that the request runs under.  mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS.  Default is zero.
; fastcgi.impersonate = 1;

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
upload_max_filesize = 200M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Define the anonymous ftp password (your email address)
;from="john@doe.com"


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
;   extension=modulename.extension
;
; For example, on Windows:
;
;   extension=msql.dll
;
; ... or under UNIX:
;
;   extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here.  Specify the location of the extension with the
; extension_dir directive above.


;Windows Extensions
;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
;
;extension=php_bz2.dll
;extension=php_ctype.dll
;extension=php_cpdf.dll
;extension=php_crack.dll
;extension=php_curl.dll
;extension=php_cybercash.dll
;extension=php_db.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_dbx.dll
;extension=php_domxml.dll
;extension=php_dotnet.dll
;extension=php_exif.dll
;extension=php_fbsql.dll
;extension=php_fdf.dll
;extension=php_filepro.dll
;extension=php_gd.dll
;extension=php_gettext.dll
;extension=php_hyperwave.dll
;extension=php_iconv.dll
;extension=php_ifx.dll
;extension=php_iisfunc.dll
;extension=php_imap.dll
;extension=php_ingres.dll
;extension=php_interbase.dll
;extension=php_java.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_oracle.dll
;extension=php_pdf.dll
;extension=php_pgsql.dll
;extension=php_printer.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_sockets.dll
;extension=php_sybase_ct.dll
;extension=php_tokenizer.dll
;extension=php_w32api.dll
;extension=php_xslt.dll
;extension=php_yaz.dll
;extension=php_zlib.dll

extension="zip.so"

extension="sqlite.so"

extension="radius.so"

extension="pgsql.so"

extension="dbx.so"

extension="ming.so"

extension="mysql.so"

;extension="dio.so"

;extension="interbase.so"

;extension="eaccelerator.so"
;eaccelerator.shm_size="16"
;eaccelerator.cache_dir="/opt/lampp/tmp/eaccelerator"
;eaccelerator.enable="1"
;eaccelerator.optimizer="1"
;eaccelerator.check_mtime="1"
;eaccelerator.debug="0"
;eaccelerator.filter=""
;eaccelerator.shm_max="0"
;eaccelerator.shm_ttl="0"
;eaccelerator.shm_prune_period="0"
;eaccelerator.shm_only="0"
;eaccelerator.compress="1"
;eaccelerator.compress_level="9"


;oci8mark

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables  = Off

[mail function]
; For Win32 only.
SMTP = localhost

; For Win32 only.
sendmail_from = me@localhost.com

; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =

[Java]
;java.class.path = .\php_java.jar
;java.home = c:\jdk
;java.library = c:\jdk\jre\bin\hotspot\jvm.dll
;java.library.path = .\

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db    =  Not yet implemented
;odbc.default_user  =  Not yet implemented
;odbc.default_pw    =  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
odbc.max_links = -1 

; Handling of LONG fields.  Returns number of bytes to variables.  0 means
; passthru.
odbc.defaultlrl = 4096 

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1 

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect().  If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo cfg_get_var("mysql.default_password")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
msql.max_links = -1

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect(). Need a little overhead.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings.  This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =

; Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns.  May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1.  In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler.  In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
session.save_path = /tmp

; Whether to use cookies.
session.use_cookies = 1


; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

; The domain for which the cookie is valid.
session.cookie_domain =

; Handler used to serialize data.  php is the standard serializer of PHP.
session.serialize_handler = php

; Percentual probability that the 'garbage collection' process is started
; on every session initialization.
session.gc_probability = 1

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =

; How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public} to determine HTTP caching aspects.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; use transient sid support if enabled by compiling with --enable-trans-sid.
session.use_trans_sid = 1

url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch.  0 = all records in one batch.
;mssql.batchsize = 0

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don't bail out by default.
;assert.bail = Off

; User-function to be called if an assertion fails.
;assert.callback = 0

; Eval the expression with current error_reporting().  Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0

[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
ingres.max_persistent = -1

; Maximum number of links, including persistents.  -1 means no limit.
ingres.max_links = -1

; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =

; Default user.
ingres.default_user =

; Default password.
ingres.default_password =

[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"

; Default port to connect to.
pfpro.defaultport = 443

; Default timeout in seconds.
pfpro.defaulttimeout = 30

; Default proxy IP address (if required).
;pfpro.proxyaddress =

; Default proxy port.
;pfpro.proxyport =

; Default proxy logon.
;pfpro.proxylogon =

; Default proxy password.
;pfpro.proxypassword =

[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On

[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true

[Printer]
;printer.default_printer = ""

[mbstring]
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP

; http input encoding.
;mbstring.http_input = auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS

; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto

; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;

; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc.
;mbstring.func_overload = No

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000

[Crack]
; Modify the setting below to match the directory location of the cracklib
; dictionary files.  Include the base filename, but not the file extension.
crack.default_dictionary = "c:\php4\lib\cracklib_dict"

; Local Variables:
; tab-width: 4
; End:
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby PF4 » 07. January 2007 13:55

Nur ne Verständnisfrage ist der RAM des Servers einfach "voll" oder verbrauchen wirklich Prozesse (ps aux) den gesammten Speicher?

Das der RAM unter Linux immer bis zum anschlag voll ist das ist ganz normal. Jedes byte an freien Speicher wird für den Puffer der Festplatte benutzt.

Zu diesem Thema wäre die ausgabe von "free -m" wichtig!
"2 Dinge sind unendlich die Dummheit der Menschheit und das Universum , aber beim Universum bin ich mir noch nicht sicher“
Albert Einstein
PF4
 
Posts: 528
Joined: 10. March 2003 09:15

Postby chrigu99 » 07. January 2007 14:03

free -m :

Code: Select all
410:~ # free -m
             total       used       free     shared    buffers     cached
Mem:          2019       1852        167          0        100       1133
-/+ buffers/cache:        618       1400
Swap:          494          7        486


ps aux :

Code: Select all
410:~ # ps aux
USER       PID %CPU %MEM   VSZ  RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.0   620  256 ?        S    Jan05   0:03 init [3]
root         2  0.0  0.0     0    0 ?        SW   Jan05   0:00 [keventd]
root         3  0.0  0.0     0    0 ?        SWN  Jan05   0:00 [ksoftirqd_CPU0]
root         4  0.0  0.0     0    0 ?        SW   Jan05   0:01 [kswapd]
root         5  0.0  0.0     0    0 ?        SW   Jan05   0:00 [bdflush]
root         6  0.0  0.0     0    0 ?        SW   Jan05   0:00 [kupdated]
root         7  0.0  0.0     0    0 ?        SW   Jan05   0:00 [kinoded]
root         8  0.0  0.0     0    0 ?        SW   Jan05   0:00 [mdrecoveryd]
root        53  0.0  0.0     0    0 ?        SW   Jan05   0:00 [kcopyd]
root        74  0.0  0.0     0    0 ?        SW<  Jan05   0:00 [lvm-mpd]
root       347  0.0  0.0  1484  464 ?        S    Jan05   0:00 /usr/local/courier-authlib/sbin/courierlogger -pid=/usr/local/courier-authlib/var/spool/authda
root       350  0.0  0.0  1488  468 ?        S    Jan05   0:00 /usr/local/courier-authlib/sbin/courierlogger -pid=/var/run/imapd.pid -start -name=imapd /usr/
root       351  0.0  0.0  1592  492 ?        S    Jan05   0:00 /usr/local/courier-imap/libexec/couriertcpd -address=0 -maxprocs=40 -maxperip=40 -nodnslookup
root       352  0.0  0.0  2044  688 ?        S    Jan05   0:00 /usr/local/courier-authlib/libexec/courier-authlib/authdaemond
root       492  0.0  0.0  2044  708 ?        S    Jan05   0:00 /usr/local/courier-authlib/libexec/courier-authlib/authdaemond
root       493  0.0  0.0  2044  708 ?        S    Jan05   0:00 /usr/local/courier-authlib/libexec/courier-authlib/authdaemond
root       494  0.0  0.0  2044  708 ?        S    Jan05   0:00 /usr/local/courier-authlib/libexec/courier-authlib/authdaemond
root       495  0.0  0.0  2044  708 ?        S    Jan05   0:00 /usr/local/courier-authlib/libexec/courier-authlib/authdaemond
root       496  0.0  0.0  2044  708 ?        S    Jan05   0:00 /usr/local/courier-authlib/libexec/courier-authlib/authdaemond
root       510  0.0  0.0  1520  560 ?        S    Jan05   0:00 /sbin/syslogd -a /var/lib/named/dev/log -a /var/lib/stunnel/dev/log
root       513  0.0  0.0  2352 1400 ?        S    Jan05   0:00 /sbin/klogd -c 1 -2
root       523  0.0  0.0  1524  496 ?        S    Jan05   0:00 /sbin/resmgrd
bin        535  0.0  0.0  1516  400 ?        S    Jan05   0:00 /sbin/portmap
root       542  0.0  0.0  4136 1064 ?        S    Jan05   0:00 /usr/sbin/saslauthd -a pam
root       543  0.0  0.0  4136 1064 ?        S    Jan05   0:00 /usr/sbin/saslauthd -a pam
root       544  0.0  0.0  4136 1064 ?        S    Jan05   0:00 /usr/sbin/saslauthd -a pam
root       545  0.0  0.0  4136 1064 ?        S    Jan05   0:00 /usr/sbin/saslauthd -a pam
root       546  0.0  0.0  4136 1064 ?        S    Jan05   0:00 /usr/sbin/saslauthd -a pam
nobody     618  0.0  0.0  1884  824 ?        S    Jan05   0:31 /usr/sbin/scanlogd
root       626  0.0  0.0  1504  580 ?        S    Jan05   0:00 /usr/sbin/acpid
root       629  0.0  0.0  4916 1640 ?        S    Jan05   0:00 /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid
named      644  0.0  0.1 11124 2560 ?        S    Jan05   0:00 /usr/sbin/named -t /var/lib/named -u named
named      645  0.0  0.1 11124 2560 ?        S    Jan05   0:00 /usr/sbin/named -t /var/lib/named -u named
named      646  0.0  0.1 11124 2560 ?        S    Jan05   0:00 /usr/sbin/named -t /var/lib/named -u named
named      647  0.0  0.1 11124 2560 ?        S    Jan05   0:00 /usr/sbin/named -t /var/lib/named -u named
named      648  0.0  0.1 11124 2560 ?        S    Jan05   0:00 /usr/sbin/named -t /var/lib/named -u named
root       768  0.0  0.0  1708  708 ?        S    Jan05   0:00 /usr/sbin/cron
root       773  0.0  0.0 12272  784 ?        S    Jan05   0:00 /usr/sbin/nscd
root       774  0.0  0.0 12272  784 ?        S    Jan05   0:00 /usr/sbin/nscd
root       775  0.0  0.0 12272  784 ?        S    Jan05   0:00 /usr/sbin/nscd
root       776  0.0  0.0 12272  784 ?        S    Jan05   0:00 /usr/sbin/nscd
root       777  0.0  0.0 12272  784 ?        S    Jan05   0:00 /usr/sbin/nscd
root       778  0.0  0.0 12272  784 ?        S    Jan05   0:00 /usr/sbin/nscd
root       779  0.0  0.0 12272  784 ?        S    Jan05   0:00 /usr/sbin/nscd
root       782  0.0  0.0  1500  512 tty2     S    Jan05   0:00 /sbin/mingetty tty2
root       783  0.0  0.0  1500  512 tty3     S    Jan05   0:00 /sbin/mingetty tty3
root       784  0.0  0.0  1500  512 tty4     S    Jan05   0:00 /sbin/mingetty tty4
root       785  0.0  0.0  1500  512 tty5     S    Jan05   0:00 /sbin/mingetty tty5
root       786  0.0  0.0  1500  512 tty6     S    Jan05   0:00 /sbin/mingetty tty6
root       787  0.0  0.0  2456 1044 ?        S    Jan05   0:00 /bin/sh /command/svscanboot
root       789  0.0  0.0  1512  328 ?        S    Jan05   0:00 svscan /service
root       790  0.0  0.0  1344  244 ?        S    Jan05   0:00 readproctitle service errors: ................................................................
root       791  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise qmail-send
root       792  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise log
root       793  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise qmail-smtpd
root       794  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise log
root       795  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise qmail-pop3d
root       796  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise log
root       797  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise qmail-pop3sd
root       798  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise log
root       799  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise clamd
root       800  0.0  0.0  1352  292 ?        S    Jan05   0:00 supervise log
qmaill     801  0.0  0.0  1492  344 ?        S    Jan05   0:00 /usr/local/bin/multilog t /var/log/qmail
vpopmail   802  0.0  0.0  1548  476 ?        S    Jan05   0:00 /usr/local/bin/tcpserver -HRDv -x /etc/tcp.smtp.cdb -c 20 -u 5009 -g 5003 0 smtp /var/qmail/bi
root       806  0.0  0.0  1376  292 ?        S    Jan05   0:00 /usr/local/bin/tcpserver -l 0 -R -H -v -u -g 0 995 /usr/local/sbin/stunnel -f -p /var/qmail/co
qmaill     807  0.0  0.0  1492  340 ?        S    Jan05   0:00 /usr/local/bin/multilog t /var/log/qmail/pop3sd
qmails     810  0.0  0.0  1524  392 ?        S    Jan05   0:03 qmail-send
qmaill     811  0.0  0.0  1492  344 ?        S    Jan05   0:00 /usr/local/bin/multilog t /var/log/qmail/smtpd
root       812  0.0  0.0  1548  464 ?        S    Jan05   0:00 tcpserver -H -R -v 0 pop3 /var/qmail/bin/qmail-popup fire-pics.ch /home/vpopmail/bin/vchkpw /v
qmaill     814  0.0  0.0  1492  344 ?        S    Jan05   0:00 /usr/local/bin/multilog t /var/log/qmail/pop3d
qscand     815  0.0  0.4 11584 10228 ?       S    Jan05   0:01 /usr/local/sbin/clamd
qscand     816  0.0  0.0  1492  340 ?        S    Jan05   0:00 /usr/local/bin/multilog t s1000000 n20 /var/log/clamd
root       823  0.0  0.0  1492  324 ?        S    Jan05   0:00 qmail-lspawn ./Maildir/
qmailr     824  0.0  0.0  1488  344 ?        S    Jan05   0:00 qmail-rspawn
qmailq     825  0.0  0.0  1480  324 ?        S    Jan05   0:00 qmail-clean
vscan      826  0.0  0.6 16064 14284 ?       S    Jan05   0:00 amavisd (master)
vscan      828  0.0  1.2 27092 24900 ?       S    Jan05   0:00 /usr/sbin/spamd -d -x -q -L -u vscan
vscan      829  0.0  0.6 16064 14284 ?       S    Jan05   0:00 amavisd (virgin child)
vscan      830  0.0  0.6 16064 14284 ?       S    Jan05   0:00 amavisd (virgin child)
qscand    1069  0.0  0.4 11584 10228 ?       S    Jan05   0:00 /usr/local/sbin/clamd
root      1325  0.0  0.0  1500  516 tty1     S    Jan05   0:00 /sbin/mingetty --noclear tty1
root     27231  0.0  0.0     0    0 ?        SW   Jan05   0:00 [kjournald]
root     18031  0.0  0.0  2648 1208 ?        S    Jan06   0:00 /bin/sh /opt/lampp/bin/mysqld_safe --old-passwords --datadir=/opt/lampp/var/mysql --pid-file=/
nobody   18068  0.0  0.1  5528 2304 ?        S    Jan06   0:00 proftpd: (accepting connections)
nobody   18074  0.0  0.4 29364 9148 ?        S    Jan06   0:01 /opt/lampp/sbin/mysqld --basedir=/opt/lampp --datadir=/opt/lampp/var/mysql --user=nobody --pid
nobody   18076  0.0  0.4 29364 9148 ?        S    Jan06   0:01 /opt/lampp/sbin/mysqld --basedir=/opt/lampp --datadir=/opt/lampp/var/mysql --user=nobody --pid
nobody   18078  0.0  0.4 29364 9148 ?        S    Jan06   0:00 /opt/lampp/sbin/mysqld --basedir=/opt/lampp --datadir=/opt/lampp/var/mysql --user=nobody --pid
root     18119  0.0  0.4 25208 9232 ?        S    Jan06   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   18148  0.0  0.4 22864 8676 ?        S    Jan06   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   28030  0.0  0.1  3936 2212 ?        S    Jan06   0:17 ./psybnc
root     10601  0.0  0.1  5588 2388 ?        S    03:03   0:01 sshd: root@pts/0
root     10602  0.0  0.1  5588 2388 ?        S    03:04   0:00 sshd: root@pts/0
root     10605  0.0  0.0  2936 1740 pts/0    S    03:04   0:00 -bash
root     24581  0.0  0.1  5440 2364 ?        S    03:50   0:00 sshd: root@pts/1
root     24594  0.0  0.1  5440 2364 ?        S    03:50   0:00 sshd: root@pts/1
root     24629  0.0  0.0  2808 1668 pts/1    S    03:50   0:00 -bash
nobody    9441  0.5  1.0 37136 22456 ?       S    13:54   0:03 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody    9847  0.5  1.0 36380 21660 ?       S    14:00   0:02 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody    9904  0.5  1.0 36384 21652 ?       S    14:01   0:02 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody    9983  0.7  1.0 36384 21640 ?       S    14:02   0:01 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
root      9999  0.0  0.1  5588 2380 ?        S    14:02   0:00 sshd: root@pts/2
root     10007  0.0  0.1  5588 2380 ?        S    14:02   0:00 sshd: root@pts/2
root     10020  0.0  0.0  2932 1652 pts/2    S    14:02   0:00 -bash
nobody   10279  0.5  1.0 36320 21624 ?       S    14:04   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10314  0.6  1.0 36464 21732 ?       S    14:04   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10317  0.8  0.0     0    0 ?        Z    14:04   0:01 [httpd] <defunct>
nobody   10321  0.5  1.0 36312 21608 ?       S    14:04   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10374  0.9  1.0 36336 21608 ?       S    14:05   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10381  0.6  1.0 37052 22300 ?       S    14:05   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10383  0.4  1.0 36452 21652 ?       S    14:05   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10452  0.7  1.0 36332 21580 ?       S    14:06   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10491  0.5  1.0 36264 21376 ?       S    14:06   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10513  1.5  1.0 36428 21608 ?       S    14:06   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10516  1.7  1.0 36336 21556 ?       S    14:06   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
nobody   10517  1.0  1.0 36328 21508 ?       S    14:06   0:00 /opt/lampp/bin/httpd -k start -DSSL -DPHP5
root     10531  0.0  0.0     0    0 ?        Z    14:07   0:00 [cron] <defunct>
nobody   10538 12.5  0.4 29364 9148 ?        S    14:07   0:00 /opt/lampp/sbin/mysqld --basedir=/opt/lampp --datadir=/opt/lampp/var/mysql --user=nobody --pid
root     10540  0.5  0.0  2544  988 ?        S    14:07   0:00 /usr/local/courier-imap/sbin/imaplogin /usr/local/courier-imap/bin/imapd Maildir
root     10543  0.0  0.0  2668  720 pts/2    R    14:07   0:00 ps aux
Last edited by chrigu99 on 07. January 2007 14:07, edited 1 time in total.
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby chrigu99 » 07. January 2007 14:06

Nach Zusammenrechnung der ps-Ausgabe komme ich auf 22.8% prozessbedingte Speicherauslastung...
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby PF4 » 07. January 2007 14:11

Hallo,

schau dir mal das Free -m an. Fast dein 3/4 deines speichers geht für das Festplattencaching drauf und das ist auch sehr gut so. Der RAM des Cache wird frei gemacht sobald ein Programm diesen braucht. PS: Jedes MB im Cache macht dein Server schneller.

EDIT:
Wenn du wirklich sehr MYSQLlastige Seiten hast kannst du mit den Puffern in der my.cnf spielen. Im Internet gibts da sehr gute Howtos. Du hast ja genug RAM dafür frei :)

2. Warum hast du amavisd laufen? für QMail gibts sehr gute Scanner -> qmailscanner in den du alle möglichen Dienste einbinden kannst
"2 Dinge sind unendlich die Dummheit der Menschheit und das Universum , aber beim Universum bin ich mir noch nicht sicher“
Albert Einstein
PF4
 
Posts: 528
Joined: 10. March 2003 09:15

Postby chrigu99 » 07. January 2007 14:17

Ok sehr gut, besten Dank, dann bin ich beruhigt... =) Hast Du etwa gerade einen Link zur Hand, welches mir die Suche abnimmt?

Beste Grüsse und danke nochmals (wieder was gelernt :) )
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby chrigu99 » 07. January 2007 14:19

Wegen amavisd: Ich habe QMail nach einem HowTo aufgesetzt, ich denke dass dieses dort empfohlen wurde. Ich bin drum mit Linux erst noch jeden Tag am lernen. Werde mich aber bei Zeitüberschuss damit auseinander setzen, vorerst bin ich aber froh dass der Mailserver sauber läuft.

Grüsse
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby PF4 » 07. January 2007 15:16

Hallo,

das sollst du nicht bei Zeitüberschuss machen (sondern am besten schon vorgestern) außer du hast Geldüberschuss auf deinem Konto! Ein geknackter Server kann neben sehr sehr sehr viel Geld auch viel Ärger machen! Vom XAMPP auf Produktiv und MailServer ohen blaßen Dunst garnicht zu reden.
Und Suchen mit Google kannste auch gleich lernen dabei ;)
"2 Dinge sind unendlich die Dummheit der Menschheit und das Universum , aber beim Universum bin ich mir noch nicht sicher“
Albert Einstein
PF4
 
Posts: 528
Joined: 10. March 2003 09:15

Postby chrigu99 » 07. January 2007 15:24

Danke, ich weiss, es ist nicht die beste Ausgangslage, jedoch habe ich nicht genügend Geld um einen Serverspezialisten zu beschäftigen um das Ganze richtig abzusichern. Ich versuche aber immer wieder zu optimieren wo es geht und bin auch um Hilfe und Tipps immer sehr dankbar.

Mit Google suchen kann ich, nur dachte ich eventuell hättest Du was vorrätig ;)

Grüsse
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby PF4 » 07. January 2007 15:26

Hallo,

Managed Server-> und du bist ie sorge los! Und die sind auch schon sehr bezahlbar zu bekommen!
"2 Dinge sind unendlich die Dummheit der Menschheit und das Universum , aber beim Universum bin ich mir noch nicht sicher“
Albert Einstein
PF4
 
Posts: 528
Joined: 10. March 2003 09:15

Postby chrigu99 » 07. January 2007 15:27

Für alle die das Gleiche suchen wie ich hier einen Link: http://www.rootforum.de/forum/viewtopic.php?t=36343
(Hoffe Links in andere Foren sind hier erlaubt, sonst bitte um Korrektur an mir)
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)

Postby chrigu99 » 07. January 2007 15:29

Ja das ist so, jedoch habe ich meinen jetzigen Server gesponsert, inklusive Traffic, etc., daher möchte ich nicht unbedingt auf eine andere Lösung umsteigen. immerhin spare ich so um die 1000 Mäuse pro Jahr.
Praxis: Jeder kann´s, aber keiner weiß wie´s geht...
Theorie: Jeder weiß wie´s geht, aber keiner kann´s ...
Microsoft vereint Praxis und Theorie: Nix geht und keiner weiß warum
User avatar
chrigu99
 
Posts: 114
Joined: 30. May 2003 10:55
Location: Bern, Schweiz (*jodel, jodel hihihihihi*)


Return to XAMPP für Linux

Who is online

Users browsing this forum: No registered users and 18 guests