Homepage ist unter der Domäne nur vom Server aus erreichbar.

[Griwl]

Hallo,

ich tüftle schon seit Wochen daran, eine Hompage zu veröffentlichen. Jedoch ohne Erfolg. Dazu habe ich bei www.dyndns.org folgende Dömäne registriert: skc-mitterkreith.homedns.org. Auf dem Server befindet sich DynDNS Updater. Die Seite ist nur vom Server selbst unter http://www.skc-mitterkreith.homedns.org/ und unter http://www.skc-mitterkreith.de erreichbar. Vom einem zweiten Rechner im internen Netzwerk ist die Seite nur unter http:\\192.168.2.4\ bzw. http:\\server\ erreichbar. "server" ist der Coputername.

Auf dem Server ist Windows XP Pofessional SP2 installiert.
Xampp 1.5.2 mit Apache 2.2.0 befindet sich auf einer separaten Partition F:/
Windows Firewall war zu testzwecken deaktiviert.
Freigeschaltete Ports der Win Firewall: 80, 443, 21, 20,

Ich benutze T-DSL 6000 von T-Online.
Am Router (Speedport W500V) habe ich folgende Einstellungen vorgenommen:
NAT eingeschaltet
Port Weiterleitung: 80, 443, 21
Port umleitung: 80, 443, 21
Port Öffnung (dynamisch): 80, 443, 21

Hier noch die Einstellungen des Apaches:

httpd.conf

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/xampp/apache" will be interpreted by the
# server as "/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild 0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule autoindex_module modules/mod_autoindex.so # don't load because of mod_autoindex_color.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule ssl_module modules/mod_ssl.so

LoadModule autoindex_color_module modules/mod_autoindex_color.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_remote_module modules/mod_auth_remote.so
#LoadModule sspi_auth_module modules/mod_auth_sspi.so
#LoadModule log_sql_module modules/mod_log_sql.so
#LoadModule log_sql_mysql_module modules/mod_log_sql_mysql.so
#<IfModule ssl_module>
# LoadModule log_sql_ssl_module modules/mod_log_sql_ssl.so
#</IfModule>
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule xmlns_module modules/mod_xmlns.so
#LoadModule proxy_xml_module modules/mod_proxy_xml.so
#LoadModule bw_module modules/mod_bw.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin griwl@t-online.de

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName www.skc-mitterkreith.homedns.org:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/xampp/www/homedns"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory "/xampp/www/homedns">
Options FollowSymLinks
AllowOverride All
Order deny,allow
Allow from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/xampp/www/homedns">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks Includes ExecCGI
AddType text/shtml .shtml
AddOutputFilter INCLUDES .shtml

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl index.html index.htm index.shtml index.phtml
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/xampp/cgi-bin/"

</IfModule>

#
# "/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/xampp/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:

#!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
#

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
AddHandler cgi-script .cgi

# For files that include their own HTTP headers:
#AddHandler send-as-is asis

# For server-parsed imagemap files:
#AddHandler imap-file map

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# XAMPP specific settings
Include conf/extra/httpd-xampp.conf

# Server-pool management (MPM specific)
# Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf

#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

Die Einstellungen der httpd-vhosts.conf
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
##NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
##<VirtualHost *:80>
## ServerAdmin webmaster@dummy-host.example.com
## DocumentRoot /www/docs/dummy-host.example.com
## ServerName dummy-host.example.com
## ServerAlias www.dummy-host.example.com
## ErrorLog @rel_logfiledir@/dummy-host.example.com-error_log
## CustomLog @rel_logfiledir@/dummy-host.example.com-access_log common
##</VirtualHost>

##<VirtualHost *:80>
## ServerAdmin webmaster@dummy-host2.example.com
## DocumentRoot /www/docs/dummy-host2.example.com
## ServerName dummy-host2.example.com
## ErrorLog @rel_logfiledir@/dummy-host2.example.com-error_log
## CustomLog @rel_logfiledir@/dummy-host2.example.com-access_log common
##</VirtualHost>

NameVirtualHost *:80

<VirtualHost *:80>

ServerName www.skc-mitterkreith.homedns.org
ServerAlias skc-mitterkreith.homedns.org *.skc-mitterkreith.homedns.org
DocumentRoot "/xampp/www/homedns"

</VirtualHost>

<VirtualHost *:80>

ServerName www.skc-mitterkreith.de
DocumentRoot "/xampp/www/de"

</VirtualHost>

Hier die Einstellungen der hosts Datei:

# Copyright (c) 1993-1999 Microsoft Corp.
#
# Dies ist eine HOSTS-Beispieldatei, die von Microsoft TCP/IP
# fr Windows 2000 verwendet wird.
#
# Diese Datei enthlt die Zuordnungen der IP-Adressen zu Hostnamen.
# Jeder Eintrag muss in einer eigenen Zeile stehen. Die IP-
# Adresse sollte in der ersten Spalte gefolgt vom zugehrigen
# Hostnamen stehen.
# Die IP-Adresse und der Hostname mssen durch mindestens ein
# Leerzeichen getrennt sein.
#
# Zustzliche Kommentare (so wie in dieser Datei) knnen in
# einzelnen Zeilen oder hinter dem Computernamen eingefgt werden,
# aber mssen mit dem Zeichen '#' eingegeben werden.
#
# Zum Beispiel:
#
# 102.54.94.97 rhino.acme.com # Quellserver
# 38.25.63.10 x.acme.com # x-Clienthost

127.0.0.1 localhost
192.168.2.4 www.skc-mitterkreith.de
192.168.2.4 www.skc-mitterkreith.homedns.org

Meine Frage: Wieso ist die Seite index.html nur vom Server selbst aus erreichbar. Ich möchte, dass die Seite index.html auch vom Ínternet aus erreichbar ist.
Ich hoffe, dass mir ein helles Köpfchen helfen kann.

Danke im Vorraus...

Chris

[zschendh]

Hallo,
fuer mich sieht das nach Firewall bzw. routing aus:

Das Portforwarding auf Deinem router ist falsch eingestellt.
Sollte so aussehen :
forward 80 --> DEINE.LOCALE.SERVER.IP:80
forward 443 --> DEINE.LOCALE.SERVER.IP:443

Der server muss natürlich den Router als default GW eingetragen haben.

Das sollte normalerweise reichen (NAT muss an sein damit deine local machinen auch nach draussen kommen, aber das hat nix mit deinem Problem zu tun)
-> Was passiert wenn Du von einem zweitrechner in Deinem Netz den DYNDNS Namen anpingst (du solltest die gerade aktuelle Public IP deines DSL routers bekommen, vorausgesetzt Du faehrst keinen eigenen resolver der was anderes eingetragen hat und intern auflöst)

Gruß
H.Richard
Lord of Kerry

[Griwl]

Danke für deine schnelle Antwort....

Mit Portforwarding kann ich die Portweiterleitung vestehen, oder?

Das ist genau so eingestellt:

Regel Definition:

Bezeichnung: WEBSERVER
Gültig für PC: server
Weitergeleitete Ports, Öffentlich & Privat: TCP 80

Bezeichnung: SSL
Gültig für PC: server
Weitergeleitete Ports, Öffentlich & Privat: TCP 443

Ist das so richtig?

Habe folgende Adressen vom zweiten rechner aus angepingt:
_____________________________________________________________
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Dokumente und Einstellungen\Administrator>ping skc-mitterkreith.homedns.org
Ping skc-mitterkreith.homedns.org [84.146.246.99] mit 32 Bytes Daten:

Antwort von 84.146.246.99: Bytes=32 Zeit<1ms TTL=64
Antwort von 84.146.246.99: Bytes=32 Zeit<1ms TTL=64
Antwort von 84.146.246.99: Bytes=32 Zeit<1ms TTL=64
Antwort von 84.146.246.99: Bytes=32 Zeit<1ms TTL=64

Ping-Statistik für 84.146.246.99:
Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust),
Ca. Zeitangaben in Millisek.:
Minimum = 0ms, Maximum = 0ms, Mittelwert = 0ms
_____________________________________________________________

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Dokumente und Einstellungen\Administrator>ping www.skc-mitterkreith.homedns.org
Ping skc-mitterkreith.homedns.org [84.146.246.99] mit 32 Bytes Daten:

Antwort von 84.146.246.99: Bytes=32 Zeit<1ms TTL=64
Antwort von 84.146.246.99: Bytes=32 Zeit<1ms TTL=64
Antwort von 84.146.246.99: Bytes=32 Zeit<1ms TTL=64
Antwort von 84.146.246.99: Bytes=32 Zeit<1ms TTL=64

Ping-Statistik für 84.146.246.99:
Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust),
Ca. Zeitangaben in Millisek.:
Minimum = 0ms, Maximum = 0ms, Mittelwert = 0ms
_____________________________________________________________

Ich bin am verzweifeln..... Kann das nicht an etwas anderem liegen??
Der Ping funktioniert ja. Ports sind am Router und an der Firewall freigeschaltet (weitergeleitet)..
Danke für eure Hilfe....

Gruß Chris

[Wiedmann]

Meine Frage: Wieso ist die Seite index.html nur vom Server selbst aus erreichbar. Ich möchte, dass die Seite index.html auch vom Ínternet aus erreichbar ist.

Ist sie doch. Du musst halt mit deinem Test-Client auch selbst im Internet sein um das zu testen. Also nicht die öffentliche IP von einem internern Cleint aus benutzen.

[Griwl]

Danke für deine Hilfe.

Die Seite ist nicht erreichbar. Ein Bekannter teste es eben von seinem eigen Internetanschluss.

Liegt das nicht an irgendwelchen Apacheeinstellungen?

[Wiedmann]

Die Seite ist nicht erreichbar

Welche? Also ich kann deinen Server erreichen...

(Ist doch der, der auf "F:\xampp\..." installiert ist?

[Griwl]

Ja das stimmt. Dort ist nur eine Test - index.html drauf. wie kann es sein dass du die Seite siehst. was hast du in der Adresszeile stehen?
Wieso kann ich die Seite nicht von meinem zweiten Rechner aus erreichen?

[Wiedmann]

Wieso kann ich die Seite nicht von meinem zweiten Rechner aus erreichen?

Das hab ich doch vorher geschrieben? *grübel*

[Griwl]

DANKE DIR......

[deepsurfer]

http://skc-mitterkreith.homedns.org = It works! !!!homedns!!!

Folglich funktioniert es, wenn diese Weisse Seite mit dem erwähnten Ausdruck zu sehen sein soll.


Dein Router ist vollkommen Maskiert somit ist ein Ping auf
84.146.246.99 nicht durchführbar und nmap lässt er damit auch nicht zu.

[Griwl]

"Dein Router ist vollkommen Maskiert somit ist ein Ping auf
84.146.246.99 nicht durchführbar und nmap lässt er damit auch nicht zu."

Die Weiße Seite mit dem Text ist nur zu Testzwecken drin.
Dort soll demnächst eine Homepage des SCK-Mitterkreith zu erreichen sein.

Was heisst das, dass mein Router vollkommen maskiert ist?
Und was ist nmap?

Danke für diene Hilfe...

[deepsurfer]

Was heisst das, dass mein Router vollkommen maskiert ist?
Und was ist nmap?

Vereinfacht ausgedrückt... wenn dein Router maskiert ist, werden PING anfragen geschluckt aber nicht beantwortet.

nmap ist ein scannertool

[Griwl]

Hab noch ein kleines Problem. Wieso werden keine Bilder angezeigt?

[deepsurfer]

Hab noch ein kleines Problem. Wieso werden keine Bilder angezeigt?

In der httpd.conf

#EnableMMAP off
#EnableSendfile off

die zwei rauten entfernen, speichern, apache neu starten, bilder sollten jetzt kommen.