Zend Guard Run-time support missing!

Irgendwelche Probleme mit XAMPP für Windows? Dann ist hier genau der richtige Ort um nachzufragen.

Zend Guard Run-time support missing!

Postby ald » 26. January 2013 03:09

Hallo habe xampp 1.7.7 installiert unter win 7 unter C:Xampp also alles normal. Wenn ich im Broswer http://localhost/xampp/index.php aufrufe alles ok, aber wenn ich localhost/meine seite aufrufe bekomme ich immer diese Fehlermeldung:

"Zend Guard Run-time support missing!

One more more files on this web site were encoded by ZendGuard and the required run-time support is not installed orproperly configured.

One or more files on your site were encoded with Zend Guard. Thismay be third party libraries that were provided to you by an ISV. Toallow these files to properly run you need to download and installone of the Zend guard run-time libraries. This is either ZendOptimizer or Zend Loader. The proper files can be downloaded fromhttp://www.zend.com/guard/downloads.This software is provided free of charge.
General Disclaimer: Zend Technologies is not responsible tothe configuration and setup of web sites using Zend Guard technology.Please contact your software vendor if these components were providedby an ISV or consult your Zend Guard Users Guide if these files wereencoded by your organization."


Habe den Zend Guard loader for php 5.3 auch runtergeladen und in den php ordner kopiert. In die php.ini den befehl: zend_extension=<full_path_to_ZendLoader.dll reingestellt wie beschreiben aber es funktioniert immer noch nicht. was ist falsch und wo und wie genau muß ich etwas reinkopieren vielleicht hab ich ja was falsch gemacht oder nicht beachtet.Danke im voraus
ald
 
Posts: 6
Joined: 26. January 2013 02:47
Operating System: windows 7

Re: Zend Guard Run-time support missing!

Postby Nobbie » 26. January 2013 13:14

ald wrote: aber wenn ich localhost/meine seite aufrufe bekomme ich immer diese Fehlermeldung:

"Zend Guard Run-time support missing!


Warum willst Du Deine eigene Seite im compilierten Modus laufen lassen? Stelle doch einfach den PHP Source dahin und fertig.

ald wrote:Habe den Zend Guard loader for php 5.3 auch runtergeladen und in den php ordner kopiert. In die php.ini den befehl: zend_extension=<full_path_to_ZendLoader.dll reingestellt wie beschreiben aber es funktioniert immer noch nicht. was ist falsch und wo und wie genau muß ich etwas reinkopieren vielleicht hab ich ja was falsch gemacht oder nicht beachtet.Danke im voraus


Hast Du die richtige php.ini erwischt? Mache mal einen phpinfo() und überprüfe a) den Standort der php.ini und b) ob das Modul geladen wurde.
Nobbie
 
Posts: 13171
Joined: 09. March 2008 13:04

Re: Zend Guard Run-time support missing!

Postby Altrea » 26. January 2013 13:26

Hallo ald,

meine letzten Informationen sind, dass Zend Guard Loader nur mit PHP 5.3 NTS (non thread safe) zu betreiben ist.
XAMPP setzt PHP 5.3 TS (thread safe) ein.

Vielleicht hat sich an dieser Voraussetzung in den letzten Monaten etwas geändert, ich habe aber keine Hinweise darauf gefunden.

mit freundlichen Grüßen,
Altrea
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Zend Guard Run-time support missing!

Postby ald » 04. February 2013 16:07

Hallo und danke für die schnellen Antworten konnte leider nicht sofort antworten. Die Probleme sind noch immer da.!!



@ Nobbie
Hast Du die richtige php.ini erwischt? Mache mal einen phpinfo() und überprüfe a) den Standort der php.ini und b) ob das Modul geladen wurde.

Habe sie unter C:/Xampp/php/ php Konfigurationsdatei(text) gespeichert. Wie sehe ich ob das Modul geladen hat?

Hier die PHP info habe es am schluß eingefügt ist das so in Ordnung??

Code: Select all
[XDebug]
;zend_extension = "C:\xampp\php\ext\php_xdebug.dll"

; xdebug.auto_trace
; Type: boolean, Default value: 0
; When this setting is set to on, the tracing of function calls will be enabled just before the
; script is run. This makes it possible to trace code in the auto_prepend_file.
;xdebug.auto_trace = 0

; xdebug.collect_includes
; Type: boolean, Default value: 1
; This setting, defaulting to On, controls whether Xdebug should write the filename used in include
; (), include_once(), require() or require_once() to the trace files.
;xdebug.collect_includes = 1

; xdebug.collect_params
; Type: integer, Default value: 0
;
; This setting, defaulting to 0, controls whether Xdebug should collect the parameters passed to
; functions when a function call is recorded in either the function trace or the stack trace.
;xdebug.collect_params = 0

; xdebug.collect_return
; Type: boolean, Default value: 0
; This setting, defaulting to Off, controls whether Xdebug should write the return value of function
; calls to the trace files.
;xdebug.collect_return = 0

; xdebug.collect_vars
; Type: boolean, Default value: Off
; This setting tells Xdebug to gather information about which variables are used in a certain scope.
; This analysis can be quite slow as Xdebug has to reverse engineer PHP's opcode arrays. This setting
; will not record which values the different variables have, for that use xdebug.collect_params. This
; setting needs to be enabled only if you wish to use xdebug_get_declared_vars().
;xdebug.collect_vars = "Off"

; xdebug.default_enable
; Type: boolean, Default value: On
; If this setting is On then stacktraces will be shown by default on an error event. You can disable
; showing stacktraces from your code with xdebug_disable(). As this is one of the basic functions of
; Xdebug, it is advisable to leave this setting set to 'On'.
;xdebug.default_enable = "On"

; xdebug.dump.*
; Type: string, Default value: Empty
; * = COOKIE, FILES, GET, POST, REQUEST, SERVER, SESSION. These seven settings control which data
; from the superglobals is shown when an error situation occurs. Each php.ini setting can consist of
; a comma seperated list of variables from this superglobal to dump, but make sure you do not add
; spaces in this setting. In order to dump the REMOTE_ADDR and the REQUEST_METHOD when an error
; occurs, add this setting:
;
; xdebug.dump.SERVER = REMOTE_ADDR,REQUEST_METHOD
; xdebug.dump.SERVER = REMOTE_ADDR,REQUEST_METHOD
;xdebug.dump.COOKIE = ""
;xdebug.dump.FILES = ""
;xdebug.dump.GET = ""
;xdebug.dump.POST = ""
;xdebug.dump.REQUEST = ""
;xdebug.dump.SERVER = ""
;xdebug.dump.SESSION = ""

; xdebug.dump_globals
; Type: boolean, Default value: 1
; Controls whether the values of the superglobals as defined by the xdebug.dump.* settings whould be
; shown or not.
;xdebug.dump_globals = 1

; xdebug.dump_once
; Type: boolean, Default value: 1
; Controls whether the values of the superglobals should be dumped on all error situations (set to
; Off) or only on the first (set to On).
;xdebug.dump_once = 1

; xdebug.dump_undefined
; Type: boolean, Default value: 0
; If you want to dump undefined values from the superglobals you should set this setting to On,
; otherwise leave it set to Off.
;xdebug.dump_undefined = 0

; xdebug.extended_info
; Type: integer, Default value: 1
; Controls whether Xdebug should enforce 'extended_info' mode for the PHP parser; this allows Xdebug
; to do file/line breakpoints with the remote debugger. When tracing or profiling scripts you
; generally want to turn off this option as PHP's generated oparrays will increase with about a third
; of the size slowing down your scripts. This setting can not be set in your scripts with ini_set(),
; but only in php.ini.
;xdebug.extended_info = 1

; xdebug.file_link_format
; Type: string, Default value: *empty string* , Introduced in Xdebug 2.1
;
; This setting determines the format of the links that are made in the display of stack traces where
; file names are used. This allows IDEs to set up a link-protocol that makes it possible to go
; directly to a line and file by clicking on the filenames that Xdebug shows in stack traces.
;xdebug.file_link_format = ""

; xdebug.idekey
; Type: string, Default value: *complex*
; Controls which IDE Key Xdebug should pass on to the DBGp debugger handler. The default is based on
; environment settings. First the environment setting DBGP_IDEKEY is consulted, then USER and as last
; USERNAME. The default is set to the first environment variable that is found. If none could be
; found the setting has as default ''.
;xdebug.idekey = ""

; xdebug.manual_url
; Type: string, Default value: http://www.php.net
; This is the base url for the links from the function traces and error message to the manual pages
; of the function from the message. It is advisable to set this setting to use the closest mirror.
;xdebug.manual_url = "http://www.php.net"

; xdebug.max_nesting_level
; Type: integer, Default value: 100
; Controls the protection mechanism for infinite recursion protection. The value of this setting is
; the maximum level of nested functions that are allowed before the script will be aborted.
;xdebug.max_nesting_level = 100

; xdebug.overload_var_dump
; Type: boolean, Default value: 1 , Introduced in Xdebug 2.1
; By default Xdebug overloads var_dump() with its own improved version for displaying variables when
; the html_errors php.ini setting is set to 1. In case you do not want that, you can set this setting
; to 0, but check first if it's not smarter to turn off html_errors.
;xdebug.overload_var_dump = 1

; xdebug.profiler_append
; Type: integer, Default value: 0
; When this setting is set to 1, profiler files will not be overwritten when a new request would map
; to the same file (depnding on the xdebug.profiler_output_name setting. Instead the file will be
; appended to with the new profile.
xdebug.profiler_append = 0

; xdebug.profiler_enable
; Type: integer, Default value: 0
; Enables Xdebug's profiler which creates files in the profile output directory. Those files can be
; read by KCacheGrind to visualize your data. This setting can not be set in your script with ini_set
; ().
xdebug.profiler_enable = 0

; xdebug.profiler_enable_trigger
; Type: integer, Default value: 0
; When this setting is set to 1, you can trigger the generation of profiler files by using the
; XDEBUG_PROFILE GET/POST parameter. This will then write the profiler data to defined directory.
xdebug.profiler_enable_trigger = 0

; xdebug.profiler_output_dir
; Type: string, Default value: /tmp
; The directory where the profiler output will be written to, make sure that the user who the PHP
; will be running as has write permissions to that directory. This setting can not be set in your
; script with ini_set().
xdebug.profiler_output_dir = "C:\xampp\tmp"

; xdebug.profiler_output_name
; Type: string, Default value: cachegrind.out.%p
;
; This setting determines the name of the file that is used to dump traces into. The setting
; specifies the format with format specifiers, very similar to sprintf() and strftime(). There are
; several format specifiers that can be used to format the file name.
;
; See the xdebug.trace_output_name documentation for the supported specifiers.
xdebug.profiler_output_name = "xdebug_profile.%R::%u"

; xdebug.remote_autostart
; Type: boolean, Default value: 0
; Normally you need to use a specific HTTP GET/POST variable to start remote debugging (see Remote
; Debugging). When this setting is set to 'On' Xdebug will always attempt to start a remote debugging
; session and try to connect to a client, even if the GET/POST/COOKIE variable was not present.
;xdebug.remote_autostart = 0

; xdebug.remote_enable
; Type: boolean, Default value: 0
; This switch controls whether Xdebug should try to contact a debug client which is listening on the
; host and port as set with the settings xdebug.remote_host and xdebug.remote_port. If a connection
; can not be established the script will just continue as if this setting was Off.
;xdebug.remote_enable = 0

; xdebug.remote_handler
; Type: string, Default value: dbgp
; Can be either 'php3' which selects the old PHP 3 style debugger output, 'gdb' which enables the GDB
; like debugger interface or 'dbgp' - the brand new debugger protocol. The DBGp protocol is more
; widely supported by clients. See more information in the introduction for Remote Debugging.
;xdebug.remote_handler = "dbgp"

; xdebug.remote_host
; Type: string, Default value: localhost
; Selects the host where the debug client is running, you can either use a host name or an IP
; address.
;xdebug.remote_host = "localhost"

; xdebug.remote_log
; Type: string, Default value: none
; If set to a value, it is used as filename to a file to which all remote debugger communications are
; logged. The file is always opened in append-mode, and will therefore not be overwritten by default.
; There is no concurrency protection available.
;xdebug.remote_log = "none"

; xdebug.remote_mode
; Type: string, Default value: req
;
; Selects when a debug connection is initiated. This setting can have two different values:
;
; req
;     Xdebug will try to connect to the debug client as soon as the script starts.
; jit
;     Xdebug will only try to connect to the debug client as soon as an error condition occurs.
;xdebug.remote_mode = "req"

; xdebug.remote_port
; Type: integer, Default value: 9000
; The port to which Xdebug tries to connect on the remote host. Port 9000 is the default for both the
; client and the bundled debugclient. As many clients use this port number, it is best to leave this
; setting unchanged.
;xdebug.remote_port = 9000

; xdebug.show_exception_trace
; Type: integer, Default value: 0
; When this setting is set to 1, Xdebug will show a stack trace whenever an exception is raised -
; even if this exception is actually caught.
;xdebug.show_exception_trace = 0

; xdebug.show_local_vars
; Type: integer, Default value: 0
; When this setting is set to something != 0 Xdebug's generated stack dumps in error situations will
; also show all variables in the top-most scope. Beware that this might generate a lot of
; information, and is therefore turned off by default.
;xdebug.show_local_vars = 0

; xdebug.show_mem_delta
; Type: integer, Default value: 0
; When this setting is set to something != 0 Xdebug's human-readable generated trace files will show
; the difference in memory usage between function calls. If Xdebug is configured to generate
; computer-readable trace files then they will always show this information.
;xdebug.show_mem_delta = 0

; xdebug.trace_format
; Type: integer, Default value: 0
; The format of the trace file.
;
; See the introduction of Function Traces for a few examples.
;xdebug.trace_format = 0

; xdebug.trace_options
; Type: integer, Default value: 0
; When set to '1' the trace files will be appended to, instead of being overwritten in subsequent
; requests.
;xdebug.trace_options = 0

; xdebug.trace_output_dir
; Type: string, Default value: /tmp
; The directory where the tracing files will be written to, make sure that the user who the PHP will
; be running as has write permissions to that directory.
; xdebug.trace_output_name
xdebug.trace_output_dir = "C:\xampp\tmp"

; Type: string, Default value: trace.%c
;
; This setting determines the name of the file that is used to dump traces into. The setting
; specifies the format with format specifiers, very similar to sprintf() and strftime(). There are
; several format specifiers that can be used to format the file name. The '.xt' extension is always
; added automatically.
;xdebug.trace_output_name = "trace.%c"

; xdebug.var_display_max_children
; Type: integer, Default value: 128
; Controls the amount of array children and object's properties are shown when variables are
; displayed with either xdebug_var_dump(), xdebug.show_local_vars or through Function Traces. This
; setting does not have any influence on the number of children that is send to the client through
; the Remote Debugging feature.
;xdebug.var_display_max_children = 128

; xdebug.var_display_max_data
; Type: integer, Default value: 512
; Controls the maximum string length that is shown when variables are displayed with either
; xdebug_var_dump(), xdebug.show_local_vars or through Function Traces. This setting does not have
; any influence on the amount of data that is send to the client through the Remote Debugging
; feature.
;xdebug.var_display_max_data = 512

; xdebug.var_display_max_depth
; Type: integer, Default value: 3
; Controls how many nested levels of array elements and object properties are when variables are
; displayed with either xdebug_var_dump(), xdebug.show_local_vars or through Function Traces. This
; setting does not have any influence on the depth of children that is send to the client through the
; Remote Debugging feature.
;xdebug.var_display_max_depth = 3

; Enables loading encoded scripts. The default value is On
; zend_loader.enable=1
; zend_extension=<full_path_to_ZendLoader.dll>
; Disable license checks (for performance reasons)
; zend_loader.disable_licensing=0
; The Obfuscation level supported by Zend Guard Loader. The levels are detailed in the official Zend Guard Documentation. 0 - no obfuscation is enabled
; zend_loader.obfuscation_level_support=3
; Path to where licensed Zend products should look for the product license. For more information on how to create a license file, see the Zend Guard User Guide
; zend_loader.license_path=

; Local Variables:
; tab-width: 4
; End:






@ Altrea
meine letzten Informationen sind, dass Zend Guard Loader nur mit PHP 5.3 NTS (non thread safe) zu betreiben ist.
XAMPP setzt PHP 5.3 TS (thread safe) ein.

Vielleicht hat sich an dieser Voraussetzung in den letzten Monaten etwas geändert, ich habe aber keine Hinweise darauf gefunden.

Danke Altrea heißt das es so nicht funktionieren kann. Was ich nicht verstehe ist wie wieso funktioniert es auf einem anderen Rechner mit den gleichen Einstellungen und Betriebsystem einwandfrei und warum muß ich den Zend Guard Loader überhaupt installieren ich wollte doch nur Xampp auf meinem Rechner installieren und nichts anderes.Wieso kommt diese Meldung überhaupt und wie kann ich sie am besten lösen.
Danke und freundliche Grüße ald

[EDIT von Altrea: code-BBCodes eingefügt um die Übersichtlichkeit zu erhöhen]
ald
 
Posts: 6
Joined: 26. January 2013 02:47
Operating System: windows 7

Re: Zend Guard Run-time support missing!

Postby Altrea » 04. February 2013 16:18

ald wrote:heißt das es so nicht funktionieren kann.

Das heißt, Zend Guard ist (nach meinen letzten Informationen) mit der in XAMPP verwendeten PHP Version inkompatibel.

ald wrote:Was ich nicht verstehe ist wie wieso funktioniert es auf einem anderen Rechner mit den gleichen Einstellungen und Betriebsystem einwandfrei

Weiß ich doch nicht!?
Läuft da auch ein XAMPP?
Auch mit PHP Version >= 5.3?
Ist das exakt dieselbe Webanwendung?

ald wrote:warum muß ich den Zend Guard Loader überhaupt installieren
[...]
Wieso kommt diese Meldung überhaupt und wie kann ich sie am besten lösen.

Weil eine der von dir verwendeten Webanwendungen teilweise oder vollständig mit Zend Guard verschlüsselt wurde um dessen Quelltext zu schützen.

mit freundlichen Grüßen,
Altrea
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Zend Guard Run-time support missing!

Postby ald » 04. February 2013 17:15

Danke Altera für die schnelle Antwort

Ja da ist auch Xampp1.7.7 installiert mit PHP 5.3.8 und derselben Webanwendung win 7 nur schon vor einigen Monaten installiert sonst alles gleich deshalb verstehe ich es nicht warum es bei mir nicht funktioniert. Kann ich also eine ältere version von xampp installieren wo die php Version älter ist, so das sie mit Zend Guard wieder kompatibl ist.?
freundliche Grüße ald
ald
 
Posts: 6
Joined: 26. January 2013 02:47
Operating System: windows 7

Re: Zend Guard Run-time support missing!

Postby Altrea » 04. February 2013 17:51

ald wrote:Ja da ist auch Xampp1.7.7 installiert mit PHP 5.3.8 und derselben Webanwendung win 7 nur schon vor einigen Monaten installiert sonst alles gleich deshalb verstehe ich es nicht warum es bei mir nicht funktioniert.

Dann bin ich auch überfragt.
Das wäre das erste Mal, dass sich zwei absolut identische Umgebungen so unterschiedlich voneinander verhalten würden :shock:
Die XAMPP Komponenten würfeln doch nicht aus, was sie tun sollen.
Und ob die Meldung mit Zend Guard erscheint wird doch auch nicht ausgewürfelt.

ald wrote:Kann ich also eine ältere version von xampp installieren wo die php Version älter ist, so das sie mit Zend Guard wieder kompatibl ist.?

Du könntest es probieren, doch wenn sich schon zwei identische Umgebungen bei dir unterschiedlich verhalten, wie verhalten sich dann wohl zwei unterschiedliche Umgebungen? :D

mit freundlichen Grüßen,
Altrea
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Zend Guard Run-time support missing!

Postby ald » 04. February 2013 17:57

Danke Altrea hast ja recht aber ich weiß auch sonst nicht mehr was ich probieren soll. Danke
ald
 
Posts: 6
Joined: 26. January 2013 02:47
Operating System: windows 7

Re: Zend Guard Run-time support missing!

Postby ald » 08. March 2013 17:06

Hallo zusammen also jetzt verstehe ich nichts mehr habe meine wordpress-seite (sicherung vom 12.2012) alles auf dem neuesten Stand auf zwei verschiedenen Rechnern mit xampp 1.7.7 installiert und ausprobiert läuft alles super ohne der Fehlermeldung einwandfrei. Jetzt kommts wenn ich eine wordpress Sicherung vom 02.2013 installiere auf den selben zwei Rechnern mit demselben Xampp 1.7.7 kommt wieder die Fehlermeldung " Zend Guard Run-time support missing!" Was ist den da nicht in Ordnung?? Kann es mit Wordpress zusammenhängen aber warum bei gleicher Version.

Danke ald
ald
 
Posts: 6
Joined: 26. January 2013 02:47
Operating System: windows 7

AW: Zend Guard Run-time support missing!

Postby Altrea » 09. March 2013 00:34

Da du ausschließlich Wordpress auswechselst wird es wohl mit Wordpress zusammenhängen.
Hast du Wordpress durch plugins erweitert?
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Zend Guard Run-time support missing!

Postby ald » 09. March 2013 08:04

Hallo Altera

Ja habe einige Plugins dazu installiert kann ja gut sein das es daran liegt den an wordpress selber kann es nicht liegen weil ich wordpress update gemacht habe und es mit der alten sicherung (12.2012)
problemlos funktioniert hat. Mit der neuen Sicherung 02.2013 aber wieder nicht. Zwischenzeitlich sind Plugins installiert worden.Das heißt das müßte die Ursache sein wie du richtig vermutet hast.
Muß man alle Plugins jetzt deinstallieren oder reicht es wenn man sie deaktiviert.

Danke und freundliche Grüße ald
ald
 
Posts: 6
Joined: 26. January 2013 02:47
Operating System: windows 7

Re: Zend Guard Run-time support missing!

Postby Altrea » 09. March 2013 13:41

ald wrote:Zwischenzeitlich sind Plugins installiert worden.Das heißt das müßte die Ursache sein wie du richtig vermutet hast.
Muß man alle Plugins jetzt deinstallieren oder reicht es wenn man sie deaktiviert.

Das weiß ich leider nicht. Probier' es doch einfach aus!?
Wir können hier keinen Support für einzelne Webanwendungen leisten. Bei Fachfragen zu Wordpress wende dich bitte an ein entsprechendes Wordpress Forum.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64


Return to XAMPP für Windows

Who is online

Users browsing this forum: No registered users and 49 guests