Help with httpd-ssl.conf

Alles, was den Apache betrifft, kann hier besprochen werden.

Help with httpd-ssl.conf

Postby tchieh3188 » 16. August 2012 04:25

***SORRY FOR POSTING THIS IN THE GERMAN SECTION, BUT IT'S THE ONLY RELATED SECTION I COULD FIND***
I KNOW THIS IS NOT RELEVANT WITH XAMPP BUT I'M SO DESPERATE IN SEEKING A SOLUTION :(

Please HELP me with setting up SSL to my domain. I have been stuck for 7 hours with it, but
I still fail to have SSL running.

I am running Apache on windows 7. I have followed the guide on thawte site, and many other countless website tutorials, but none of them seems to work.

What is shown below is my httpd-ssl.conf, PLEASE help me to see what is wrong!! This is very frustrating.

And Yes, i have uncommented the following two lines from httpd.conf
Include conf/extra/httpd-ssl.conf
LoadModule ssl_module modules/mod_ssl.so
and also have uncommented the following line from php.ini
extension=php_openssl.dll

1. i have made sure the specified path correctly contains the files i want.
2. i have modified several incidence within the file for which the path was origianlly c:/apache2 but this does not exist on my computer.

The only way to get my server running right now is without the SSL.
If i comment out Include conf/extra/httpd-ssl.conf in httpd.conf then everything returns to normal... apache server fails to start (orange light instead of green)
when i try to include the ssl conf file. So obviously the problem lies in the settings below:


#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:[httpd.apache.org];
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512


#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443

##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##

#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl

# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin

# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:c:/Apache2/logs/ssl_scache"
SSLSessionCache "shmcb:C:/wamp/bin/Apache/apache2.2.22/conf/ssl/logs/ssl_scache(512000)"
SSLSessionCacheTimeout 300

# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex default

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

# General setup for the virtual host
DocumentRoot "C:\wamp\bin\apache\apache2.2.22\htdocs"
ServerName www.******.com:443
ServerAdmin ******@yahoo.com.tw
ErrorLog "C:/wamp/bin/Apache/apache2.2.22/conf/ssl/logs/ssl_error.log"
TransferLog "C:/wamp/bin/Apache/apache2.2.22/conf/ssl/logs/ssl_access.log"

# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on

# SSL Protocol support:
# List the protocol versions which clients are allowed to
# connect with. Disable SSLv2 by default (cf. RFC 6176).
SSLProtocol all -SSLv2

# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5

# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on

# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
SSLCertificateFile "C:/wamp/bin/apache/apache2.2.22/conf/ssl/crt/www.zlf168.com.crt"
#SSLCertificateFile "c:/Apache2/conf/server-dsa.crt"

# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile "C:/wamp/bin/apache/apache2.2.22/conf/ssl/private/private.key"
#SSLCertificateKeyFile "c:/Apache2/conf/server-dsa.key"

# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
SSLCertificateChainFile "C:/wamp/bin/apache/apache2.2.22/conf/ssl/crt/SSL123_CA_Bundle.pem"

# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "c:/Apache2/conf/ssl.crt"
#SSLCACertificateFile "C:/wamp/bin/apache/apache2.2.22/conf/ssl/crt/SSL123_CA_Bundle.pem"

# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "c:/Apache2/conf/ssl.crl"
#SSLCARevocationFile "c:/Apache2/conf/ssl.crl/ca-bundle.crl"

# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10

# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "C:/wamp/bin/apache/apache2.2.22/cgi-bin">
SSLOptions +StdEnvVars
</Directory>

# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0

# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "C:/wamp/bin/apache/apache2.2.22/conf/ssl/logs/ssl_request.log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>


Thank you in advance for helping!
tchieh3188
 
Posts: 2
Joined: 16. August 2012 04:23
XAMPP Version: 5.6.3
Operating System: WINDOWS 7

Re: Help with httpd-ssl.conf

Postby tchieh3188 » 16. August 2012 04:27

in addition to that, here's the error log, i dont see anything useful though.

[Thu Aug 16 09:47:24 2012] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Thu Aug 16 09:47:24 2012] [notice] Child 6064: Exit event signaled. Child process is ending.
[Thu Aug 16 09:47:25 2012] [notice] Child 6064: Released the start mutex
[Thu Aug 16 09:47:26 2012] [notice] Child 6064: All worker threads have exited.
[Thu Aug 16 09:47:26 2012] [notice] Child 6064: Child process is exiting
[Thu Aug 16 09:47:26 2012] [notice] Parent: Child process exited successfully.
tchieh3188
 
Posts: 2
Joined: 16. August 2012 04:23
XAMPP Version: 5.6.3
Operating System: WINDOWS 7


Return to Apache

Who is online

Users browsing this forum: No registered users and 4 guests