Kann keine php-Dateien anzeigen lassen!

Irgendwelche Probleme mit XAMPP für Windows? Dann ist hier genau der richtige Ort um nachzufragen.

Kann keine php-Dateien anzeigen lassen!

Postby computerpap » 28. April 2011 14:33

Hallo

Ich habe mir die aktuelle Version 1.7.4-VC6 von xampp unter Windows 7 64bit installiert. Im xampp-ControlPanel ist der Apache und MySQL gestartet. Der Apache läuft auf Port 80.
Installiert ist xampp unter d:\Programme\xampp. Nun hab ich mir zum testen eine einfache php-Datei geschrieben, die nur die php-Version ausgibt.
Wenn ich im Browser die php-Datei aufrufe, bekomme ich als Meldung "Objekt nicht gefunden, Error 404". Die php-Datei mit Namen "hallo.php", habe ich im Ordner d:\Programme\xampp\htdocs
gespeichert.
Folgende Aufrufe im Browser habe ich schon getestet:
http://localhost/hallo.php
http://127.0.0.1/hallo.php
http://meinIPAdresse/hallo.php
Immer der gleiche Fehler.
Auf Port 80 läuft laut netstat auch nur der Apache. Programme wie Skype hab ich nicht installiert, es läuft nur noch ein Webserver auf Port82.
Firewall (GData) hatte ich auch schon deaktiviert.
Wenn ich http://localhost/ eingebe, öffnet sich die Hauptseite von xampp, also sollte xampp bzw. der Apache doch laufen.
Wieso bekomme ich immer diesen Fehler? Bitte um Hilfe.
Danke schon mal im voraus.

MfG
computerpap
computerpap
 
Posts: 9
Joined: 28. April 2011 14:14

Re: Kann keine php-Dateien anzeigen lassen!

Postby computerpap » 28. April 2011 15:04

Hallo
Die Datei wurde mit Weaverslave geschrieben und heißt definitiv "hallo.php" und sie ist
auch definitiv im Ordner d:\Programme\xampp\htdocs gespeichert.

MfG
computerpap
computerpap
 
Posts: 9
Joined: 28. April 2011 14:14

Re: Kann keine php-Dateien anzeigen lassen!

Postby WilliL » 28. April 2011 15:52

hast du vielleicht 2 XAMPP Installationen und die falsche gestartet?
Was passiert denn mit eine einfachen index.htm? (Das Original mal umbenennen)
Willi
WilliL
 
Posts: 660
Joined: 08. January 2010 10:54
Operating System: Win7Home Prem 64 SP1

Re: Kann keine php-Dateien anzeigen lassen!

Postby computerpap » 28. April 2011 17:18

zu wole:

Was genau meinst du mit
Dann läuft noch ein anderer Webserver / Apache als localhost.


computerpap hat geschrieben:es läuft nur noch ein Webserver auf Port82.
Was ist mit dem?
Und Port 82 ???


Was meinst du genau mit "Apache als localhost"?
Den anderen Webserver rufe ich mit localhost:82/index.php auf.

Der Ordner "xamppapache/logs" ist leer. Ich bekomme ja auch keine Fehlermeldung beim starten des Apache.
Windows ist unter C:\Windows installiert.

zu WilliL:
Ich hatte gestern erst die Installer-Version von xampp installiert, der selbe Fehler. Wieder deinstalliert.
Dann hatte ich die zip-Version, ebenfalls der Fehler, wieder alles gelöscht.
Heute habe ich nochmal die Installer-Version installiert.
Es gibt eigentlich nur eine xampp-Version.
computerpap
 
Posts: 9
Joined: 28. April 2011 14:14

Re: Kann keine php-Dateien anzeigen lassen!

Postby computerpap » 28. April 2011 18:18

Es gibt nur eine xampp-Installation. Ich habe keine zweite installiert.
Was muß ich denn jetzt tun, damit beide Webserver nebeneinander laufen?

MfG
computerpap
computerpap
 
Posts: 9
Joined: 28. April 2011 14:14

Re: Kann keine php-Dateien anzeigen lassen!

Postby Altrea » 28. April 2011 18:24

Hast du vielleicht mal einen normalen Apache ohne XAMPP installiert?
Oder ein anderes Webserverpaket mit Apache (WAMP, EasyPHP)?
Oder horcht dein anderer Webserver neben Port 82 auchnoch auf Port 80?
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Kann keine php-Dateien anzeigen lassen!

Postby computerpap » 28. April 2011 19:04

Nein, ich habe den Apache nur einmal installiert.
Der andere Webserver nutzt nur Port 82. Das wird mir auch mit netstat so angezeigt.
computerpap
 
Posts: 9
Joined: 28. April 2011 14:14

Re: Kann keine php-Dateien anzeigen lassen!

Postby Nobbie » 28. April 2011 22:17

Zeig uns doch mal die httpd.conf Deiner Xamppp Installation (als Quelltext).
Nobbie
 
Posts: 13170
Joined: 09. March 2008 13:04

Re: Kann keine php-Dateien anzeigen lassen!

Postby Altrea » 29. April 2011 04:41

computerpap wrote:Nein, ich habe den Apache nur einmal installiert.
Der andere Webserver nutzt nur Port 82. Das wird mir auch mit netstat so angezeigt.


Irgendetwas ist an der Fehlerbeschreibung nicht schlüssig.

Zum einen ist die error.log Datei deines angeblich gestarteten Apachen leer. Dort speichert der Apache nichtnur alle HTTP Fehler wie den von dir verursachten 404 File not found, sondern auch seinen eigenen Startvorgang.
Zum anderen scheint aber irgendein Apache zu laufen, denn der HTTP 404 Fehler kommt doch bei dir von einem Apache Server, nach deiner Schilderung.

Entweder hast du deine Konfiguration gründlich verbogen und uns davon bisher nichts erzählt, oder du hast einen dieser exotischen Apache Webserver die sich entgegen allen eigenen Einstellungen und Standards verhalten.
Oder, was ich am wahrscheinlichsten halte, irgendetwas an deiner Geschichte stimmt nicht. Überprüfe bitte nochmal alle Angaben, die du bisher hier in deinen Posts gegeben hast.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Kann keine php-Dateien anzeigen lassen!

Postby computerpap » 29. April 2011 14:54

Hier mal meine httpd.conf, vielleicht findet einer von euch ja was, das den Fehler auslöst.

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:/Programme/xampp/apache" will be interpreted by the
# server as "D:/Programme/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "D:/Programme/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 0.0.0.0:80
#Listen [::]:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule case_filter_module modules/mod_case_filter.so
#LoadModule case_filter_in_module modules/mod_case_filter_in.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
LoadModule env_module modules/mod_env.so
#LoadModule example_module modules/mod_example.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin postmaster@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "D:/Programme/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "D:/Programme/xampp/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks Includes ExecCGI

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
home.php home.pl home.cgi home.asp home.shtml home.html home.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#ScriptLog "logs/cgi.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog "logs/access.log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://localhost/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "D:/Programme/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock "logs/cgi.sock"
</IfModule>

#
# "D:/Programme/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "D:/Programme/xampp/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig "conf/mime.types"

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
AddHandler cgi-script .cgi .pl .asp

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
</IfModule>

<IfModule mime_magic_module>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
MIMEMagicFile "conf/magic"
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# XAMPP specific settings
Include "conf/extra/httpd-xampp.conf"

# Perl settings
Include "conf/extra/httpd-perl.conf"

# Server-pool management (MPM specific)
Include "conf/extra/httpd-mpm.conf"

# Multi-language error messages
Include "conf/extra/httpd-multilang-errordoc.conf"

# Fancy directory listings
Include "conf/extra/httpd-autoindex.conf"

# Language settings
Include "conf/extra/httpd-languages.conf"

# User home directories
Include "conf/extra/httpd-userdir.conf"

# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"

# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"

# Distributed authoring and versioning (WebDAV)
# Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation
# Include "conf/extra/httpd-dav.conf"

# Implements a proxy/gateway for Apache.
Include "conf/extra/httpd-proxy.conf"

# Various default settings
Include "conf/extra/httpd-default.conf"

# Secure (SSL/TLS) connections
Include "conf/extra/httpd-ssl.conf"
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
SSLSessionCache "shmcb:logs/ssl.scache(512000)"
SSLSessionCacheTimeout 300
</IfModule>

# AJP13 Proxy
<IfModule mod_proxy.c>
<IfModule mod_proxy_ajp.c>
Include "conf/extra/httpd-ajp.conf"
</IfModule>
</IfModule>
computerpap
 
Posts: 9
Joined: 28. April 2011 14:14

Re: Kann keine php-Dateien anzeigen lassen!

Postby computerpap » 29. April 2011 15:57

Ich hab nochmal die komplette Fehlermeldung gepostet, vielleicht kann da jemand was erklärendes finden.
Objekt nicht gefunden!
Der angeforderte URL konnte auf dem Server nicht gefunden werden. Sofern Sie den URL manuell eingegeben haben, überprüfen Sie bitte die Schreibweise und versuchen Sie es erneut.

Sofern Sie dies für eine Fehlfunktion des Servers halten, informieren Sie bitte den Webmaster hierüber.

Error 404
localhost
29.04.2011 16:52:54
Apache/2.2.17 (Win32) mod_ssl/2.2.17 OpenSSL/0.9.8o PHP/5.3.4 mod_perl/2.0.4 Perl/v5.10.1
computerpap
 
Posts: 9
Joined: 28. April 2011 14:14

Re: Kann keine php-Dateien anzeigen lassen!

Postby Altrea » 29. April 2011 18:57

Wenn es ein Apache ist der da antworten, sollte es auch irgendwo ein error.log file geben.
Mein Vorschlag daher: Durchsuche mal bitte deine kompletten Festplatten C und D nach einer error.log Datei
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64


Return to XAMPP für Windows

Who is online

Users browsing this forum: No registered users and 31 guests