PHP will Download machen statt ausführen

Alles, was PHP betrifft, kann hier besprochen werden.

PHP will Download machen statt ausführen

Postby fler » 07. May 2005 08:02

Hallo
Ich habe das Problem mit suse9.1 Pro Apache2, PHP4
Der apache2 lauft PHP4 hätte ich installiert für Apache2 die die php configurierung hat linux anscheinend selbst gemacht jedoch wenn ich eine derartige seite aufrufe kommt die frage ausführen , speichern, abrechen ?
So als ob ein Download stattfinden würde.
Leider bin ich anfänger also bitte die Antworten dementsprechend.
der server lauft auf 80.123.143.235
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Postby kappa » 07. May 2005 09:56

Schau mal in deiner httpd.conf ob da die PHP-Module geadded sind. Und gugg mal mit deinem YaST, ob mod_php wirklich installiert ist.
kappa
 
Posts: 2
Joined: 06. May 2005 15:03

Ja

Postby fler » 07. May 2005 10:03

Ja soweit ich das sehe schon
kann ich dir eventuell diese datei schicken zur durchsicht?
erreichbar wäre er auf 80.123.143.235/gusnerwirt/shop/index.php
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Postby fler » 07. May 2005 10:23

Es müsste auch folgender link gehen.
http://80.123.143.235/phpMyAdmin/index.php
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Postby Wiedmann » 07. May 2005 10:28

Ja soweit ich das sehe schon

Soweit ich das sehe (beim klick auf den Link) ist PHP nicht installiert.


(BTW: geht das gerade um? Gab es doch erst vor 2 Tagen einen Thread mit dem selben Problem)
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby fler » 07. May 2005 11:14

Wie kann ich das ausfindig machen?
Ich habe die software im yast installiert PHP-Modul für apache2
in sysconfig/apache2 ist php4 auch geaddet
was muß ich sonst noch machen ?
php4.conf ist includet
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Postby fler » 07. May 2005 11:19

Code: Select all
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
# with ServerRoot set to "/srv/www" will be interpreted by the
# server as "/srv/www//var/log/apache2/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/srv/www"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#LockFile /var/log/apache2/accept.lock
</IfModule>
</IfModule>

#
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_netware.c>
<IfModule !perchild.c>
#ScoreBoardFile /var/log/apache2/apache_runtime_status
</IfModule>
</IfModule>


#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
<IfModule !mpm_netware.c>
PidFile /var/run/httpd.pid
</IfModule>

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers         5
MinSpareServers      5
MaxSpareServers     10
MaxClients         150
MaxRequestsPerChild  0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers         2
MaxClients         150
MinSpareThreads     25
MaxSpareThreads     75
ThreadsPerChild     25
MaxRequestsPerChild  0
</IfModule>

# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
AcceptMutex fcntl
NumServers           5
StartThreads         5
MinSpareThreads      5
MaxSpareThreads     10
MaxThreadsPerChild  20
MaxRequestsPerChild  0
</IfModule>

# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild  0
</IfModule>

# BeOS MPM
# StartThreads: how many threads do we initially spawn?
# MaxClients:   max number of threads we can have (1 thread == 1 client)
# MaxRequestsPerThread: maximum number of requests each thread will process
<IfModule beos.c>
StartThreads               10
MaxClients                 50
MaxRequestsPerThread       10000
</IfModule>   

# NetWare MPM
# ThreadStackSize: Stack size allocated for each worker thread
# StartThreads: Number of worker threads launched at server startup
# MinSpareThreads: Minimum number of idle threads, to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# MaxThreads: Maximum number of worker threads alive at the same time
# MaxRequestsPerChild: Maximum  number of requests a thread serves. It is
#                      recommended that the default value of 0 be set for this
#                      directive on NetWare.  This will allow the thread to
#                      continue to service requests indefinitely.                         
<IfModule mpm_netware.c>
ThreadStackSize      65536
StartThreads           250
MinSpareThreads         25
MaxSpareThreads        250
MaxThreads            1000
MaxRequestsPerChild      0
MaxMemFree             100
</IfModule>

# OS/2 MPM
# StartServers: Number of server processes to maintain
# MinSpareThreads: Minimum number of idle threads per process,
#                  to handle request spikes
# MaxSpareThreads: Maximum number of idle threads per process
# MaxRequestsPerChild: Maximum number of connections per server process
<IfModule mpmt_os2.c>
StartServers           2
MinSpareThreads        5
MaxSpareThreads       10
MaxRequestsPerChild    0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80

Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_module /usr/lib/apache2-prefork/mod_access.so
LoadModule auth_module /usr/lib/apache2-prefork/mod_auth.so
LoadModule auth_anon_module /usr/lib/apache2-prefork/mod_auth_anon.so
LoadModule auth_dbm_module /usr/lib/apache2-prefork/mod_auth_dbm.so
LoadModule auth_digest_module /usr/lib/apache2-prefork/mod_auth_digest.so
LoadModule file_cache_module /usr/lib/apache2-prefork/mod_file_cache.so
LoadModule echo_module /usr/lib/apache2-prefork/mod_echo.so
LoadModule charset_lite_module /usr/lib/apache2-prefork/mod_charset_lite.so
LoadModule cache_module /usr/lib/apache2-prefork/mod_cache.so
LoadModule disk_cache_module /usr/lib/apache2-prefork/mod_disk_cache.so
LoadModule mem_cache_module /usr/lib/apache2-prefork/mod_mem_cache.so
LoadModule case_filter_module /usr/lib/apache2-prefork/mod_case_filter.so
LoadModule case_filter_in_module /usr/lib/apache2-prefork/mod_case_filter_in.so
LoadModule ldap_module /usr/lib/apache2-prefork/mod_ldap.so
LoadModule auth_ldap_module /usr/lib/apache2-prefork/mod_auth_ldap.so
LoadModule ext_filter_module /usr/lib/apache2-prefork/mod_ext_filter.so
LoadModule include_module /usr/lib/apache2-prefork/mod_include.so
LoadModule deflate_module /usr/lib/apache2-prefork/mod_deflate.so
LoadModule log_config_module /usr/lib/apache2-prefork/mod_log_config.so
LoadModule logio_module /usr/lib/apache2-prefork/mod_logio.so
LoadModule env_module /usr/lib/apache2-prefork/mod_env.so
LoadModule mime_magic_module /usr/lib/apache2-prefork/mod_mime_magic.so
LoadModule cern_meta_module /usr/lib/apache2-prefork/mod_cern_meta.so
LoadModule expires_module /usr/lib/apache2-prefork/mod_expires.so
LoadModule headers_module /usr/lib/apache2-prefork/mod_headers.so
LoadModule usertrack_module /usr/lib/apache2-prefork/mod_usertrack.so
LoadModule unique_id_module /usr/lib/apache2-prefork/mod_unique_id.so
LoadModule setenvif_module /usr/lib/apache2-prefork/mod_setenvif.so
LoadModule proxy_module /usr/lib/apache2-prefork/mod_proxy.so
LoadModule proxy_connect_module /usr/lib/apache2-prefork/mod_proxy_connect.so
LoadModule proxy_ftp_module /usr/lib/apache2-prefork/mod_proxy_ftp.so
LoadModule proxy_http_module /usr/lib/apache2-prefork/mod_proxy_http.so
<IfDefine SSL>
LoadModule ssl_module /usr/lib/apache2-prefork/mod_ssl.so
</IfDefine>
LoadModule mime_module /usr/lib/apache2-prefork/mod_mime.so
LoadModule dav_module /usr/lib/apache2-prefork/mod_dav.so
LoadModule status_module /usr/lib/apache2-prefork/mod_status.so
LoadModule autoindex_module /usr/lib/apache2-prefork/mod_autoindex.so
LoadModule asis_module /usr/lib/apache2-prefork/mod_asis.so
LoadModule info_module /usr/lib/apache2-prefork/mod_info.so
LoadModule suexec_module /usr/lib/apache2-prefork/mod_suexec.so
LoadModule cgi_module /usr/lib/apache2-prefork/mod_cgi.so
LoadModule dav_fs_module /usr/lib/apache2-prefork/mod_dav_fs.so
LoadModule vhost_alias_module /usr/lib/apache2-prefork/mod_vhost_alias.so
LoadModule negotiation_module /usr/lib/apache2-prefork/mod_negotiation.so
LoadModule dir_module /usr/lib/apache2-prefork/mod_dir.so
LoadModule imap_module /usr/lib/apache2-prefork/mod_imap.so
LoadModule actions_module /usr/lib/apache2-prefork/mod_actions.so
LoadModule speling_module /usr/lib/apache2-prefork/mod_speling.so
LoadModule userdir_module /usr/lib/apache2-prefork/mod_userdir.so
LoadModule alias_module /usr/lib/apache2-prefork/mod_alias.so
LoadModule rewrite_module /usr/lib/apache2-prefork/mod_rewrite.so

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000;
#  don't use Group #-1 on these systems!
#
User nobody
Group #-1
</IfModule>
</IfModule>

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
#ServerName www.example.com:80

#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/srv/www/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/srv/www/htdocs">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
#
    Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
UserDir public_html

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
#    AllowOverride FileInfo AuthConfig Limit Indexes
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/apache2/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile /etc/apache2/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#
#EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is
# used  to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#
#EnableSendfile off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /var/log/apache2/access_log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/apache2/referer_log referer
#CustomLog /var/log/apache2/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/apache2/access_log combined

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
ServerTokens Full

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/usr/share/apache2/icons/"

<Directory "/usr/share/apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>

#
# This should be changed to the ServerRoot/manual/.  The alias provides
# the manual, even if you choose to move your DocumentRoot.  You may comment
# this out if you do not care for the documentation.
#
AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$ "/usr/share/apache2/manual$1"

<Directory "/usr/share/apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all

    <Files *.html>
        SetHandler type-map
    </Files>

    SetEnvIf Request_URI ^/manual/de/ prefer-language=de
    SetEnvIf Request_URI ^/manual/en/ prefer-language=en
    SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr
    SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja
    SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko
    SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru
    RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"

<IfModule mod_cgid.c>
#
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#
#Scriptsock            /var/run/cgisock
</IfModule>

#
# "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/srv/www/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing VersionSort

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
#
#AddLanguage ca .ca
#AddLanguage cs .cz .cs
#AddLanguage da .dk
AddLanguage de .de
#AddLanguage el .el
#AddLanguage en .en
#AddLanguage eo .eo
#AddLanguage es .es
#AddLanguage et .et
#AddLanguage fr .fr
#AddLanguage he .he
#AddLanguage hr .hr
#AddLanguage it .it
#AddLanguage ja .ja
#AddLanguage ko .ko
#AddLanguage ltz .ltz
#AddLanguage nl .nl
#AddLanguage nn .nn
#AddLanguage no .no
#AddLanguage pl .po
#AddLanguage pt .pt
#AddLanguage pt-BR .pt-br
#AddLanguage ru .ru
#AddLanguage sv .sv
#AddLanguage zh-CN .zh-cn
#AddLanguage zh-TW .zh-tw

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
#
AddDefaultCharset ISO-8859-1

#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
#
AddCharset ISO-8859-1  .iso8859-1  .latin1
AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
AddCharset ISO-8859-3  .iso8859-3  .latin3
AddCharset ISO-8859-4  .iso8859-4  .latin4
AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5        .Big5       .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251   .win-1251
AddCharset CP866       .cp866
AddCharset KOI8-r      .koi8-r .koi8-ru
AddCharset KOI8-ru     .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8       .utf8

# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
#
# See http://www.iana.org/assignments/character-sets
# for a list of sorts. But browsers support few.
#
AddCharset GB2312      .gb2312 .gb
AddCharset utf-7       .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis

#
# For server-parsed imagemap files:
#
#AddHandler imap-file map

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
#
AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis.  The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation.  To activate them, uncomment the following 30 lines.

#    Alias /error/ "/usr/share/apache2/error/"
#
#    <Directory "/usr/share/apache2/error">
#        AllowOverride None
#        Options IncludesNoExec
#        AddOutputFilter Includes html
#        AddHandler type-map var
#        Order allow,deny
#        Allow from all
#        LanguagePriority en cs de es fr it nl sv pt-br ro
#        ForceLanguagePriority Prefer Fallback
#    </Directory>
#
#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var


#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully

#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Location>


#
# Bring in additional module-specific configurations
#
<IfModule mod_ssl.c>
    Include /etc/apache2/ssl.conf
</IfModule>


### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog /var/log/apache2/dummy-host.example.com-error_log
#    CustomLog /var/log/apache2/dummy-host.example.com-access_log common
#</VirtualHost>
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Das ist /etc/sysconfig/apache2

Postby fler » 07. May 2005 11:22

Code: Select all
## Path:   Network/WWW/Apache2
## Description:   Configuration for Apache 2
## Type:   string
## Default:   ""
## ServiceRestart: apache2
#
# Which config file do you want to use?
# (if not set, /etc/apache2/httpd.conf is used.)
#
APACHE_HTTPD_CONF=""

## Type:   list(prefork,worker,leader,metuxmpm)
## Default:   ""
## Command:   /usr/sbin/apache2-reconfigure-mpm
#
# MPM (multi-processing module) to use.
#
# Needed to determine with which MPM apache will run, as well as
# against which header files modules will be built.
#
# If not set, the system will simply pick one of the installed MPMs.
#
APACHE_MPM="metuxmpm"

## Type:   string
## Default:   ""
## ServiceReload: apache2
#
# email address of the server administrator (ServerAdmin directive)
# This address is added to the server's responses if APACHE_SERVERSIGNATURE
# is set to "email".
#
# If empty ("") it defaults to webmaster@$FQHOSTNAME, where FQHOSTNAME is
# taken from /etc/HOSTNAME.
#
# Note that ServerAdmin directives inside VirtualHost statements are not
# changed, even not the one in the stock SSL virtual host block.
#
APACHE_SERVERADMIN="erich@gusennet.at"

## Type:   string
## Default:   ""
## ServiceReload: apache2
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
APACHE_SERVERNAME="www.gusennet.at"

## Type:   string
## Default:   ""
## ServiceRestart: apache2
#
# Here you can name files, separated by spaces, that should be Include'd from
# httpd.conf.
#
# This allows you to add e.g. VirtualHost statements without touching
# /etc/httpd/httpd.conf itself, which makes upgrading easier.
#
APACHE_CONF_INCLUDE_FILES=""

## Type:   string
## Default:   ""
## ServiceRestart: apache2
#
# Here you can name directories, separated by spaces, that should be Include'd
# from httpd.conf.
#
# All files contained in these directories will be recursively included by apache.
# If a pattern like *.conf is appended, apache will use it.
#
# Examples: "/etc/apache2/my_conf/"
#           "/etc/apache2/virtual_hosts/*.conf"
#           "local/*.conf /srv/www/virtual/"
#
APACHE_CONF_INCLUDE_DIRS="/etc/apache2/conf.d/*conf"

## Type:   string
## Default:   "access actions alias auth auth_dbm autoindex cgi dir env expires include log_config mime negotiation setenvif ssl suexec userdir php4"
## ServiceRestart: apache2
#
# [It might look silly to not simply edit httpd.conf for the LoadModule statements.
# However, since the LoadModule statements might need an absolute path to the modules,
# switching between MPMs can be quite a hassle. It's easier to just give the names here.]
#
# * list of all modules shipped with the base distribution:
#
#    access actions alias asis auth auth_anon auth_dbm auth_digest auth_ldap
#    autoindex cache case_filter case_filter_in cern_meta cgi charset_lite
#    dav dav_fs deflate dir disk_cache echo env expires ext_filter file_cache
#    headers imap include info ldap log_config logio mem_cache mime mime_magic
#    negotiation proxy proxy_connect proxy_ftp proxy_http rewrite setenvif
#    speling ssl status suexec unique_id userdir usertrack vhost_alias
#
#   see http://httpd.apache.org/docs-2.0/mod/ !
#
# * It pays to use IfDefine statements... like
#    <IfModule mod_xyz.c>
#        ....
#    </IfModule>
#
# * In the APACHE_MODULES variable, you can use mod_xyz or just xyz syntax.
#   You may also name an absolute path if you like.
#
# * NOTE ON MOD_SSL: before you can enable this module, you need a server certificate.
#   A test certificate can be created by entering
#   'cd /usr/share/doc/packages/apache2; ./certificate.sh' as root.
#   Also, you need to set the ServerName inside the <VirtualHost _default_:443>
#   block to the fully qualified domain name (see /etc/HOSTNAME).
#
# * if your server certificate is protected by a passphrase you should increase the
#   APACHE_START_TIMEOUT (see above)
#
# * modules listed here will be ignored if they are not installed
#
#
# EXAMPLES:
#
# fairly minimal
# APACHE_MODULES="access alias auth dir log_config mime setenvif"
#
# apache's default installation
# APACHE_MODULES="access actions alias asis auth autoindex cgi dir imap include log_config mime negotiation setenvif status userdir"
# your settings
APACHE_MODULES="suexec access actions alias auth auth_dbm autoindex cgi dir env expires include log_config mime negotiation setenvif status userdir asis auth_anon ssl vhost_alias php4"

## Type:   string
## Default:   ""
## ServiceRestart: apache2
#
# Additional server flags:
#
# Put here any server flags ("Defines") that you want to hand over to
# httpd at start time, or other command line flags.
#
# Background: Any directives within an <IfDefine flag>...</IfDefine>
#             section are only processed if the flag is defined.
#
# This could be -D SSL, for example. Or -DSTATUS.
# (it does not matter whether you "-D flag1 -D flag2" or simply "flag1 flag2")
#
# Specifying such flags here is equivalent to giving them on the commandline.
# (e.g. rcapache2 start -DReverseProxy)
#
APACHE_SERVER_FLAGS=""

## Type:   integer
## Default:   2
#
# timeout during server startup (seconds)
# after this time, the start script decides wether the httpd process started without error.
#
# Increase it, if you use mod_ssl and your certificate is passphrase protected!
#
APACHE_START_TIMEOUT="2"

## Type:   list(on,off,email)
## Default:   "on"
## ServiceReload: apache2
#
# Configures the footer on server-generated documents
# This correlates to the ServerSignature directive.
#
APACHE_SERVERSIGNATURE="on"

## Type:   list(debug,info,notice,warn,error,crit,alert,emerg)
## Default:   "warn"
## ServiceReload: apache2
#
# LogLevel: Control the number of messages logged to the error_log.
#
APACHE_LOGLEVEL="warn"

## Type:   string
## Default:   "/var/log/apache2/access_log combined"
## ServiceRestart: apache2
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrarywise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
# Simply set it to empty, if you configure it yourself somewhere else.
#
# Examples:
#
# If you would like to have agent and referer logfiles:
#
# setting it to "/var/log/apache2/referer_log referer, /var/log/apache2/agent_log agent"
#   corresponds to
# CustomLog /var/log/apache2/referer_log referer
# CustomLog /var/log/apache2/agent_log   agent
#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format):
#
# setting it to "/var/log/apache2/access_log combined"
#   corresponds to
# CustomLog /var/log/apache2/access_log combined
#
APACHE_ACCESS_LOG="/var/log/apache2/access_log combined"

## Type:   list(On,Off,DNS)
## Default:   "Off"
## ServiceReload: apache2
#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
APACHE_USE_CANONICAL_NAME="On"

## Type:   list(Major,Minor,Minimal,ProductOnly,OS,Full)
## Default:   "OS"
## ServiceReload: apache2
#
# How much information the server response header field contains about the server.
# (installed modules, versions, etc.)
# see http://httpd.apache.org/docs-2.0/mod/core.html#servertokens
#
APACHE_SERVERTOKENS="Full"

## Type:   list(on,off)
## Default:   "off"
## ServiceReload: apache2
#
# If mod_status is used, include extended information about the server, like
# CPU usage, in the status report. It is a server-wide setting, and it can cost
# some performance!
#
APACHE_EXTENDED_STATUS="off"

## Type:   list(on,off)
## Default:   "off"
## ServiceRestart: apache2
#
# Enable buffered logging
#
APACHE_BUFFERED_LOGS="off"

## Type:   integer
## Default:   300
## ServiceReload: apache2
#
# Timeout: The number of seconds before receives and sends time out.
# It is a server wide setting.
#
APACHE_TIMEOUT="300"
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Postby PF4 » 07. May 2005 11:55

hi,
ich sehe weder eine Handler-Einstellung noch einen load für das Modul.
Also wird es eindeutig nicht richtig installiert werden.
Am besten mal von Hand probieren.
"2 Dinge sind unendlich die Dummheit der Menschheit und das Universum , aber beim Universum bin ich mir noch nicht sicher“
Albert Einstein
PF4
 
Posts: 528
Joined: 10. March 2003 09:15

Postby Wiedmann » 07. May 2005 11:58

php4.conf ist includet

Wie kommst du da drauf? In der ganzen "httpd.conf" (s.o.) kommt nirgends das Wort PHP vor... Da gibt es noch nicht mal einen Include, ausser den für SSL. Bist du sicher das diese "httpd.conf" benutzt wird? (der Content-Type bei dir für PHP-Dateien spricht eigentlich dagegen)

Was die 2. Datei machen soll und für was die gut ist, hab ich keine Ahnung.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

bitte

Postby fler » 07. May 2005 20:13

Könnte mir bitte jemand eine httpd.conf schicken bei der php configuriert ist für den apache 2?
wie gesagt ich habe suse 9.1 pro
und ich habe eigentlich alles in der originalconfiguration.
das php modul habe ich mit yast istalliert unter Software installieren deinstallieren.
ich kenne jedoch nicht die einträge die für php.
IP ist 80.123.143.235
name www.gusnerwirt.com
danke im voraus
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Postby Wiedmann » 07. May 2005 20:26

ich kenne jedoch nicht die einträge die für php.

Die findest du logischerweise im PHP-Manual:
http://de.php.net/manual/en/install.unix.apache2.php
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

????????????

Postby fler » 07. May 2005 23:57

Das habe ich mir durchgelesen.
Aber ich habe eigentlich nicht das richtige für mich gefunden.
Ich habe nochmal nachgesehen software-packet php-modul für apache2 ist laut yast installiert.
Jedoch eine modul.php.so kann ich nirgens finden.
es wäre mir recht wenn mir da jemand eine configuration schicken könnte.
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Postby PF4 » 08. May 2005 10:41

Hi,

eine andere config wird auf deinem Apache nicht laufen.
In dem Link von Wiedmann steht doch genau drin was man machen muss.
Es müssen max. noch die pathes angepasst werden
"2 Dinge sind unendlich die Dummheit der Menschheit und das Universum , aber beim Universum bin ich mir noch nicht sicher“
Albert Einstein
PF4
 
Posts: 528
Joined: 10. March 2003 09:15

Postby fler » 08. May 2005 19:15

Ich finde nirgens die modul-php.so
dort wo sie angegeben sind stehen sie bei mir nicht drinnen desswegen kann ich auch den path nicht angeben und dieses modul nicht deffinieren.
laut yast ist jedoch das modul installiert.
weiters finde ich auch meiner platte auch die php.ini nicht.
ich habe schon das php modul für apache2 deins und wieder neu inst.
Jedoch trotzdem finde ich es nirgens.
desswegen kann ich mit diesen angaben auch nichts machen .
es steht auch wie man apache2 installiert, das habe ich schon der lauft.
php5 steht auch aber ich möchte das von suse 9.1 integrierte php4 zum laufen bringen und diese erklärung habe ich nicht gefunden.
Desswegen die bitte ob mir vielleicht jemand helfen kann wie ich als erster vorgehen kann um hier den wurm zu finden.
fler
 
Posts: 9
Joined: 07. May 2005 07:52

Next

Return to PHP

Who is online

Users browsing this forum: No registered users and 4 guests