Bei Aufruf der Subdomain wird der Inhalt der Domain geladen

Alles, was den Apache betrifft, kann hier besprochen werden.

Bei Aufruf der Subdomain wird der Inhalt der Domain geladen

Postby scroom » 26. May 2017 20:50

Hallo,

ich hoffe, dass ich hier richtig bin und ihr mir weiterhelfen könnt. Ich habe auf meinem Webserver (Apache 2.4 auf Ubuntu 16.04) eine Subdomain eingerichtet. Wenn ich diese allerdings ansteuere, wird der Inhalt der Hauptdomain geladen. Es scheint keine Umleitung zu geben (zumindest bleibt die Adresse im Adressfeld des Browsers bestehen). DNS-Record ist erstellt und ein Ping geht auch durch. Außerdem habe ich vor dem Anlegen bereits ein Zertifikat von Letsencrypt installiert, welches auch für die Subdomain gilt:

Hier ist meine neu angelegte Subdomain:
Code: Select all
<VirtualHost *:80>
 DocumentRoot /opt/www/nextcloud
 ServerName cloud.domain.com
 Redirect / https://cloud.domain.com

 ErrorLog ${APACHE_LOG_DIR}/error.log
 CustomLog ${APACHE_LOG_DIR}/access.log combined

<Directory /opt/www/nextcloud/>
 Options +FollowSymlinks
 AllowOverride All

 <IfModule mod_dav.c>
 Dav off
 </IfModule>

 SetEnv HOME /opt/www/nextcloud
 SetEnv HTTP_HOME /opt/www/nextcloud
 Satisfy Any

</Directory>

</VirtualHost>


Und hier weitere vorhandene aktive Konfigurationen in unter /etc/apache2/sites-enabled:

000-default.conf:
Code: Select all
<VirtualHost *:80>
        # The ServerName directive sets the request scheme, hostname and port that
        # the server uses to identify itself. This is used when creating
        # redirection URLs. In the context of virtual hosts, the ServerName
        # specifies what hostname must appear in the request's Host: header to
        # match this virtual host. For the default virtual host (this file) this
        # value is not decisive as it is used as a last resort host regardless.
        # However, you must set it for any further virtual host explicitly.
        #ServerName www.example.com

        ServerName domain.com
        Redirect permanent / https://domain.com/

        #ServerAdmin webmaster@localhost
        #DocumentRoot /var/www/html

        # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
        # error, crit, alert, emerg.
        # It is also possible to configure the loglevel for particular
        # modules, e.g.
        #LogLevel info ssl:warn

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        # For most configuration files from conf-available/, which are
        # enabled or disabled at a global level, it is possible to
        # include a line for only one particular virtual host. For example the
        # following line enables the CGI configuration for this host only
        # after it has been globally disabled with "a2disconf".
        #Include conf-available/serve-cgi-bin.conf
#RewriteEngine on
#RewriteCond %{SERVER_NAME} =domain.com
#RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [END,QSA,R=permanent]
</VirtualHost>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet


default-ssl.conf:
Code: Select all
<IfModule mod_ssl.c>
        <VirtualHost _default_:443>
                ServerAdmin webmaster@localhost

                DocumentRoot /var/www/html
                ServerName domain.com
                <Directory /var/www/html/>
                        AllowOverride All
                </Directory>

                # Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
                # error, crit, alert, emerg.
                # It is also possible to configure the loglevel for particular
                # modules, e.g.
                #LogLevel info ssl:warn

                ErrorLog ${APACHE_LOG_DIR}/error.log
                CustomLog ${APACHE_LOG_DIR}/access.log combined

                # For most configuration files from conf-available/, which are
                # enabled or disabled at a global level, it is possible to
                # include a line for only one particular virtual host. For example the
                # following line enables the CGI configuration for this host only
                # after it has been globally disabled with "a2disconf".
                #Include conf-available/serve-cgi-bin.conf

                #   SSL Engine Switch:
                #   Enable/Disable SSL for this virtual host.
                SSLEngine on
                SSLCipherSuite ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM$
                SSLHonorCipherOrder on

                #   A self-signed (snakeoil) certificate can be created by installing
                #   the ssl-cert package. See
                #   /usr/share/doc/apache2/README.Debian.gz for more info.
                #   If both key and certificate are stored in the same file, only the
                #   SSLCertificateFile directive is needed.
                #SSLCertificateFile /etc/ssl/certs/iRedMail.crt
                #SSLCertificateKeyFile /etc/ssl/private/iRedMail.key
                SSLCertificateFile /etc/letsencrypt/live/domain.com/fullchain.pem
                SSLCertificateKeyFile /etc/letsencrypt/live/domain.com/privkey.pem

                #   Server Certificate Chain:
                #   Point SSLCertificateChainFile at a file containing the
                #   concatenation of PEM encoded CA certificates which form the
                #   certificate chain for the server certificate. Alternatively
                #   the referenced file can be the same as SSLCertificateFile
                #   when the CA certificates are directly appended to the server
                #   certificate for convinience.
                #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt


                #   Certificate Authority (CA):
                #   Set the CA certificate verification path where to find CA
                #   certificates for client authentication or alternatively one
                #   huge file containing all of them (file must be PEM encoded)
                #   Note: Inside SSLCACertificatePath you need hash symlinks
                #                to point to the certificate files. Use the provided
                #                Makefile to update the hash symlinks after changes.
                #SSLCACertificatePath /etc/ssl/certs/
                #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt

                #   Certificate Revocation Lists (CRL):
                #   Set the CA revocation path where to find CA CRLs for client
                #   authentication or alternatively one huge file containing all
                #   of them (file must be PEM encoded)
                #   Note: Inside SSLCARevocationPath you need hash symlinks
                #                to point to the certificate files. Use the provided
                #                Makefile to update the hash symlinks after changes.
                #SSLCARevocationPath /etc/apache2/ssl.crl/
                #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl

                #   Client Authentication (Type):
                #   Client certificate verification type and depth.  Types are
                #   none, optional, require and optional_no_ca.  Depth is a
                #   number which specifies how deeply to verify the certificate
                #   issuer chain before deciding the certificate is not valid.
                #SSLVerifyClient require
                #SSLVerifyDepth  10


                #   SSL Engine Options:
                #   Set various options for the SSL engine.
                #   o FakeBasicAuth:
                #        Translate the client X.509 into a Basic Authorisation.  This means that
                #        the standard Auth/DBMAuth methods can be used for access control.  The
                #        user name is the `one line' version of the client's X.509 certificate.
                #        Note that no password is obtained from the user. Every entry in the user
                #        file needs this password: `xxj31ZMTZzkVA'.
                #   o ExportCertData:
                #        This exports two additional environment variables: SSL_CLIENT_CERT and
                #        SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
                #        server (always existing) and the client (only existing when client
                #        authentication is used). This can be used to import the certificates
                #        into CGI scripts.
                #   o StdEnvVars:
                #        This exports the standard SSL/TLS related `SSL_*' environment variables.
                #        Per default this exportation is switched off for performance reasons,
                #        because the extraction step is an expensive operation and is usually
                #        useless for serving static content. So one usually enables the
                #        exportation for CGI and SSI requests only.
                #   o OptRenegotiate:
                #        This enables optimized SSL connection renegotiation handling when SSL
                #        directives are used in per-directory context.
                #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
                <FilesMatch "\.(cgi|shtml|phtml|php)$">
                                SSLOptions +StdEnvVars
                </FilesMatch>
                <Directory /usr/lib/cgi-bin>
                                SSLOptions +StdEnvVars
                </Directory>

                #   SSL Protocol Adjustments:
                #   The safe and default but still SSL/TLS standard compliant shutdown
                #   approach is that mod_ssl sends the close notify alert but doesn't wait for
                #   the close notify alert from client. When you need a different shutdown
                #   approach you can use one of the following variables:
                #   o ssl-unclean-shutdown:
                #        This forces an unclean shutdown when the connection is closed, i.e. no
                #        SSL close notify alert is send or allowed to received.  This violates
                #        the SSL/TLS standard but is needed for some brain-dead browsers. Use
                #        this when you receive I/O errors because of the standard approach where
                #        mod_ssl sends the close notify alert.
                #   o ssl-accurate-shutdown:
                #        This forces an accurate shutdown when the connection is closed, i.e. a
                #        SSL close notify alert is send and mod_ssl waits for the close notify
                #        alert of the client. This is 100% SSL/TLS standard compliant, but in
                #        practice often causes hanging connections with brain-dead browsers. Use
                #        this only for browsers where you know that their SSL implementation
                #        works correctly.
                #   Notice: Most problems of broken clients are also related to the HTTP
                #   keep-alive facility, so you usually additionally want to disable
                #   keep-alive for those clients, too. Use variable "nokeepalive" for this.
                #   Similarly, one has to force some clients to use HTTP/1.0 to workaround
                #   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
                #   "force-response-1.0" for this.
                BrowserMatch "MSIE [2-6]" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
                # MSIE 7 and newer should be able to use keepalive
                BrowserMatch "MSIE [17-9]" \
                                ssl-unclean-shutdown

                Alias /cluebringer "/usr/share/postfix-cluebringer-webui/webui/"
Alias /iredadmin/static "/opt/www/iredadmin/static/"
WSGIScriptAlias /iredadmin "/opt/www/iredadmin/iredadmin.py/"
Alias /mail "/opt/www/roundcubemail/"
Alias /awstats/icon "/usr/share/awstats/icon/"
Alias /awstatsicon "/usr/share/awstats/icon/"
ScriptAlias /awstats "/usr/lib/cgi-bin/"
Header always add Strict-Transport-Security "max-age=15768000; includeSubDomains; preload"
ServerAlias www.domain.com
#ServerAlias cloud.domain.com
        </VirtualHost>
</IfModule>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet


Meine alte owncloud.conf:
Code: Select all
Alias /owncloud "/var/www/owncloud/"
<Directory "/var/www/owncloud">
  Options +FollowSymLinks
  AllowOverride All

  <IfModule mod_dav.c>
        Dav off
  </IfModule>

  SetEnv HOME /var/www/owncloud
  SetEnv HTTP_HOME /var/www/owncloud
</Directory>

<Directory "/var/www/owncloud/data/">
  # just in case if .htaccess gets disabled
    Require all denied
</Directory>


Wisst ihr, was ich tun kann, damit wie gewünscht der Inhalt meiner Subdomain geladen wird?
scroom
 
Posts: 2
Joined: 26. May 2017 20:37
XAMPP version: 5.6.30
Operating System: Ubuntu 16.04

Re: Bei Aufruf der Subdomain wird der Inhalt der Domain gela

Postby scroom » 29. May 2017 18:04

Mir wurde bei ubuntuusers.de ( https://forum.ubuntuusers.de/topic/subdomain-nicht-erreichbar/), wo ich auch gefragt hatte, geholfen. Die Lösung war es einen weiteren Vhost für https anzulegen:

Code: Select all
<IfModule mod_ssl.c>
<VirtualHost *:443>

 ServerName cloud.domain.com
 ServerAlias cloud.domain.com
 DocumentRoot /opt/www/nextcloud/
 #Redirect / https://cloud.domain.com


 ErrorLog ${APACHE_LOG_DIR}/error.log
 CustomLog ${APACHE_LOG_DIR}/access.log combined

<Directory /opt/www/nextcloud/>
 Options +FollowSymlinks
 AllowOverride All

 <IfModule mod_dav.c>
 Dav off
 </IfModule>

 SetEnv HOME /opt/www/nextcloud
 SetEnv HTTP_HOME /opt/www/nextcloud
 Satisfy Any

</Directory>

SSLCertificateFile /etc/letsencrypt/live/domain.com/fullchain.pem
SSLCertificateKeyFile /etc/letsencrypt/live/domain.com/privkey.pem
Include /etc/letsencrypt/options-ssl-apache.conf
</VirtualHost>
</IfModule>
scroom
 
Posts: 2
Joined: 26. May 2017 20:37
XAMPP version: 5.6.30
Operating System: Ubuntu 16.04


Return to Apache

Who is online

Users browsing this forum: No registered users and 4 guests