apache2, probleme beim laden von bildern

Alles, was den Apache betrifft, kann hier besprochen werden.

Postby klaus2k » 05. June 2004 14:15

hab hier gerade was gefunden...

Interessant zu dem Problem eine ähnliche Geschichte (redirect, 302)http://support.microsoft.com:80/support/kb/articles/q193/4/89.asp&NoWebContent=1&NoWebContent=1, besonders gegen Textende der Beschreibung:

"When Internet Explorer receives the first TCP frame with an HTTP/1.1 302 redirect, Internet Explorer processes the redirect
command and attempts to use the open socket connection to the server that sent the redirect. This occurs because Internet
Explorer has not processed the second TCP frame containing the FIN or the "socket close connection" command, so Internet
Explorer assumes that the current state of the socket connection is still open. This is an intermittent problem because Internet
Explorer may recognize that the socket connection was closed by the server and open a new socket connection to the server if
Internet Explorer receives the TCP frames close enough together, or if no HTML body is sent at all. "



also wenn ich das richtig verstanden habe, gibts da probleme mit den verbindungen. aus dem forum wo ich den beitrag habe, ging es darum, dass wohl eine seite immer etwa 15sekunden wie gehangen hat bis es weiterging. sowas ist ja auch bei den bildern der fall.
klaus2k
 
Posts: 20
Joined: 04. June 2004 12:10

Postby Dj Andi » 05. June 2004 15:07

Ist aber trotzdem komisch das es beim Netscape keine 304 Meldung gibt.
Und dann ist da ja noch das es bei dem einen funzt trotz der meldung und bei dem anderen wieder nicht.

Hier hast Du mal meine Config:

Code: Select all
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://httpd.apache.org/docs-2.0/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "C:/xampp/apache"

#
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#
#ScoreBoardFile logs/apache_runtime_status

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile logs/httpd.pid

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
##

# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild  0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80



#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
#LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so


<IfModule mod_dav.c>
<IfModule mod_dav_fs.c>
Include conf/moddav.conf
</IfModule>
</IfModule>

<IfModule mod_auth_mysql.c>
Include conf/mod_auth_mysql.conf
</IfModule>

Include conf/ssl.conf

LoadFile "C:/xampp/apache/bin/php4ts.dll"
LoadModule php4_module "C:/xampp/apache/bin/php4apache2.dll"

Alias /webalizer "C:/xampp/webalizer/"

    <Directory "C:/xampp/webalizer/">
        Options Indexes MultiViews ExecCGI
        AddHandler cgi-script .cgi .exe
        Order allow,deny
        Allow from all
    </Directory>


#ScriptAlias /php/ "C:/xampp/php/"

AddType application/x-httpd-php .php .php4 .php3 .phtml
#Action application/x-httpd-php "/php/php.exe"

Alias /phpmyadmin "C:/xampp/phpmyadmin/"

    <Directory "C:/xampp/phpMyAdmin/">
        Options Indexes MultiViews ExecCGI
        DirectoryIndex index.php
        Order allow,deny
        Allow from all
    </Directory>

    Alias /excel "C:/xampp/htdocs/excel/"

    <Directory "C:/xampp/htdocs/excel/">
        Options Indexes MultiViews ExecCGI
        AddHandler cgi-script .cgi .exe
        Order allow,deny
        Allow from all
    </Directory>

    Alias /pdf "C:/xampp/htdocs/pdf/"

    <Directory "C:/xampp/htdocs/pdf/">
        Options Indexes MultiViews ExecCGI
        AddHandler cgi-script .cgi .exe
        Order allow,deny
        Allow from all
    </Directory>

    Alias /csimcache "C:/xampp/tmp/"

    <Directory "C:/xampp/tmp">
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin webmaster@condor-bbs.de

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
ServerName localhost

#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/xampp/htdocs">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
#
    Options Indexes FollowSymLinks MultiViews Includes ExecCGI
   AddType text/html .shtml
        AddHandler server-parsed .shtml
        AddHandler cgi-script .cgi .pl
# ReadmeName footer.html
#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride All

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.  Be especially careful to use
# proper, forward slashes here.
#
# UserDir "My Documents/My Website"

#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.htm index.php index.php4 index.php3 index.cgi index.pl index.html.var index.phtml

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.  See also the AllowOverride directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig conf/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel error

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog logs/access.log common
CustomLog "|C:/xampp/apache/bin/rotatelogs.exe C:/xampp/apache/logs/access-%Y%m%d.log 86400" combined

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
# CustomLog logs/access.log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "C:/xampp/apache/icons/"

<Directory "C:/xampp/apache/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>


#
# This should be changed to the ServerRoot/manual/.  The alias provides
# the manual, even if you choose to move your DocumentRoot.  You may comment
# this out if you do not care for the documentation.
#
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"

#
# "C:/xampp/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/xampp/cgi-bin">
    AllowOverride None
    Options Includes ExecCGI
        AddHandler server-parsed .shtml
        AddHandler cgi-script .cgi .pl
    Order allow,deny
    Allow from all
</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# FancyIndexing is whether you want fancy directory indexing or standard.
# VersionSort is whether files containing version numbers should be
# compared in the natural way, so that `apache-1.3.9.tar' is placed before
# `apache-1.3.12.tar'.
#
IndexOptions FancyIndexing VersionSort

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru) - Croatian (hr)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage he .he
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
AddLanguage hr .hr

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
# LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
# ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
#
AddDefaultCharset ISO-8859-1

#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
# the official list of charset names and their respective RFCs
#
AddCharset ISO-8859-1  .iso8859-1 .latin1
AddCharset ISO-8859-2  .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3  .iso8859-3 .latin3
AddCharset ISO-8859-4  .iso8859-4 .latin4
AddCharset ISO-8859-5  .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6  .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7  .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8  .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9  .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5        .Big5       .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251   .win-1251
AddCharset CP866       .cp866
AddCharset KOI8-r      .koi8-r .koi8-ru
AddCharset KOI8-ru     .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8       .utf8

# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
#
# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
# for a list of sorts. But browsers support few.
#
AddCharset GB2312      .gb2312 .gb
AddCharset utf-7       .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
AddType application/x-tar .tgz
#AddType text/html .shtml
#AddHandler server-parsed .shtml


#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis

#
# For server-parsed imagemap files:
#
#AddHandler imap-file map

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
#
AddHandler type-map var

# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddOutputFilter INCLUDES .shtml

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can Internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line;
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# C:/xampp/apache/error/include/ files and
# copying them to /your/include/path/, even on a per-VirtualHost basis.
#

<IfModule mod_negotiation.c>
<IfModule mod_include.c>
    Alias /error/ "C:/xampp/apache/error/"

    <Directory "C:/xampp/apache/error">
        AllowOverride None
        Options IncludesNoExec
        AddOutputFilter Includes html
        AddHandler type-map var
        Order allow,deny
        Allow from all
        LanguagePriority en es de fr
        ForceLanguagePriority Prefer Fallback
    </Directory>

    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    ErrorDocument 410 /error/HTTP_GONE.html.var
    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

</IfModule>
</IfModule>

#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".localhost" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .localhost
#</Location>

#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .localhost
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
#    Order deny,allow
#    Deny from all
#    Allow from .your-domain.com
#</Proxy>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "C:/xampp/apache/proxy"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.



# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

# Win32DisableAcceptEx ON
Include conf/apanatschi.conf


Und das ist die phpinfo:
http://www.condor-bbs.dyndns.org/phpinfo.php

Gruß Andreas
Dj Andi
 
Posts: 58
Joined: 17. May 2003 16:44
Location: NRW

Postby Wiedmann » 05. June 2004 15:40

Hilfe :?

Macht euch doch nicht verrückt wegen dem Statuscode...

klaus2k wrote:Interessant zu dem Problem eine ähnliche Geschichte (redirect, 302)http://support.microsoft.com:80/support/kb/articles/q193/4/89.asp&NoWebContent=1&NoWebContent=1, besonders gegen Textende der Beschreibung:

@klaus2k
Dir ist klar, dass es hier nur im 302, sprich um einen Redirect, und die Behandlung desselben von ganz bestimmten IE-Versionen auf speziellen Betriebsystemen geht?

Dj Andi wrote:Seit Apache 2.0.48 behobene Fehler
Korrketur von proxy_http: mod_proxy hing, wenn sowohl KeepAlive als auch ProxyErrorOverride aktiviert waren und vom Backendserver eine Antwort mit einem anderen Statuscode als 200 und ohne Daten generiert wurde. (z.B.: Ein Client sendet eine Anfrage, welche die Header "If-Modified-Since" und "If-None-Match" enthält, und auf die der Backend-Server mit dem Status 304 antwortet.)

@Dj Andi
Wie schon gesagt, hier geht es nur um das Modul mod_proxy, wenn dieses unter bestimmten Umständen von dem entfernten Server, wo die Daten liegen, einen anderen Statuscode als 200 zurückbekommt. Damit ist nicht nur euer ominöser "304" gemeint. Der war hier nur Beispiel. Um bei dieser Version den Fehler zu bemerken, muß man auch den Proxy vom Apache ansprechen. Falls der nur evtl. geladen ist, wirkt sich das nicht aus.

@allgemein
Die Statuscodes 200 und 304 dürften wohl die häufigsten sein, die euer Server zurückgibt.
200 = alles OK
304 = Wenn der Browser oder ein dazwischengeschalteter Proxy (je nach Konfiguration) anfrägt, ob es eine neuere Version von der Datei gibt als jene die im Cache vorliegt.

BTW. liegt das ursprüngliche Problem beim IE i.d.R. an einem defekten Cache / Registry-Einstellungen für diesen.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby Dj Andi » 05. June 2004 17:37

Wenn ich das jetzt richtig verstehe, liegt es an der Gegenseite und nicht am Server :?:
Dj Andi
 
Posts: 58
Joined: 17. May 2003 16:44
Location: NRW

Postby klaus2k » 05. June 2004 17:43

hi,
also ich habe mal wieder rumporbiert und glaube eine minimal-lösung gefunden zu haben... und zwar wenn man keep-alive deaktiviert. (in der http.conf einfach KeepAlive Off). danach habe ich den fehler nicht mehr festgestellt. kann aber auch nur zufall sein.

@dj andi : ich würde dich bitten das eventuell auch mal zu testen.


@Wiedmann : an meinen auszug schließt meine eventuelle lösung an. dort ging es zwar um ein 302 problem, jedoch hatte der ie mit dem keep-alive probleme, was sich auf unser problem übertragen läßt.
klaus2k
 
Posts: 20
Joined: 04. June 2004 12:10

Postby klaus2k » 05. June 2004 17:53

ach ja und noch was...

ich beschäftige mich mit dem thema, da mehrere meiner besucher dieses problem beklagt haben. ich denke es sollte möglich sein mit den standard einstellungen die seite zu besuchen, ohne das ich besondere einstellungen im cache oder registry machen muss.

und das eigentliche problem war ja nicht der 304 code, sondern das er das bild erst falsch übertragen und dann durch den 304 nicht aktuallisiert hat. meine 304 erklärung sollte nur verdeutlichen warum es dann nicht neu geladen wird. nur warum überträgt er es falsch... normal wäre doch anstelle des bilds ein symbol, dass er die datei nicht laden kann; so ein bild mit nem roten x wenn ich mich nicht irre.es kommt aber ein sozuagen voll transparentes gif, das sich nur durch makieren orten lässt.

sorry falls missverständnisse aufkamen.
klaus2k
 
Posts: 20
Joined: 04. June 2004 12:10

Postby Dj Andi » 05. June 2004 18:00

Hab das jetzt mal gemacht, jetzt steht da:
    Max Requests Per Child: 0 - Keep Alive: off - Max Per Connection: 100
    Timeouts Connection: 300 - Keep-Alive: 0


aber im Logfile steht immer noch:
input2.gif HTTP/1.1" 304
Dj Andi
 
Posts: 58
Joined: 17. May 2003 16:44
Location: NRW

Postby klaus2k » 05. June 2004 18:11

das da ein 304 kommt ist ja kein problem.
lösche mal deine temporary internet files und dann geh auf deine seite.

jetzt sollte es nicht mehr passieren das solche fehlerhaften bilder kommen.
klaus2k
 
Posts: 20
Joined: 04. June 2004 12:10

Postby klaus2k » 09. June 2004 20:05

hmm also mit keepalive off geht es wirklich ohne probleme.. warum weiss ich allerdings nicht.
klaus2k
 
Posts: 20
Joined: 04. June 2004 12:10

Postby iamhermes » 10. June 2004 20:55

bei mir hab ich neuerdings auch das problem, dass bei mir über die http://.... abfrage keine grafiken mehr geladen werden. ist aber erst seit ner systemneuinstallation. seit dem hab ich die bildprobleme. nichtmal über einen direktlink zum betreffenden bild bekomm ich des nicheinmal angezeigt.

aber eine übergangslösung gibts doch ;)

und zwar macht mal die abfragen über https://
damit nimmt er die grafiken bei mir ohne probleme auf. und ich kann sie ohne probleme lesen. also stimmt doch normal was bei der http abfrage nich.
iamhermes
 
Posts: 16
Joined: 11. May 2004 20:52

Postby klaus2k » 10. June 2004 22:06

genau so ist es bei mir auch... bei mir hilft wie gesagt keepalive off.
jedoch muss ich, dass die bilder dann angezeigt werden, meine temporary internet files löschen. alles sehr komisch.

vielleicht hat der ie ja eine auto update funktion die noch keiner bemerkt hat ;) und jetzt hat sich ein fehler eingeschlichen ;) hehe
klaus2k
 
Posts: 20
Joined: 04. June 2004 12:10

Postby Desertfury » 15. June 2004 15:52

Ich hab das Porblem auch. Am anfang hab ich die bilder noch gesehen, jetz gehts allerdings nicht mehr ohne probleme. Hab mal das keep alive abgeschaltet aber das brachte auch nur kurzzeitig abhilfe. Und das auch nur bei mir, alle andern können sich die bilder weiterhin nicht angucken.
Ich seh die Bilder meist nur zur hälfte, manche gar nicht und manche voll. Und alle seh ich erst nachdem ich mehrmals aktualisieren gedrückt hab.
Desertfury
 
Posts: 3
Joined: 14. June 2004 22:01

Postby nemesis » 19. June 2004 22:57

Netlimiter, XPAntispy, ne Firewall/Virenscanner oder sonst noch was eventuell störendes nebenbei installiert?
Bei WinXP SP1 installiert?
Ubuntu 8.04 | SMP P3 1.4 GHz | 6 GByte RegECC | 74 GByte Seagate 15k5 system | 3Ware 9550SXU-4LP with 4x 500 GByte Seagate ES2 Raid 10 data | StoreCase DE400 | PX-230A | Intel Pro/1000MT Dual PCI-X
User avatar
nemesis
AF Moderator
 
Posts: 999
Joined: 29. December 2002 13:14
Location: Ingolstadt

Postby klaus2k » 19. June 2004 23:27

hi,
nein ich habe nichts von dem .. einen blanken ie. habe es auch schon auf mehreren pcs probiert.

ich bin jetzt aber fest der meinung das es am ie liegen muß, da ich das gleiche problem im moment hier habe. ich sehe keine bilder mehr vom forum, sondern nur eine art transparenter gifs. ist aber das erstemal.

da ich auf meiner seiter sehr viele anfragen deswegen habe, denke ich nicht das es an mir liegt.


mfg
klaus
klaus2k
 
Posts: 20
Joined: 04. June 2004 12:10

Postby Desertfury » 20. June 2004 10:40

Ich hab selbstverständlich ne Firewall und nen Virenscanner sowie XPAntispy. WinXP SP1 is installiert. Aber firewall war so eingerichtet dass der apache durch durfte, virenscanner kümmert sich nich um das proggi, ebensowenig XPAntispy.

Meiner Meinung nach darf sowas auch einfach nich passieren, hab bis jetz nur gutes drüber gehört, aber wenn der in konflikt mit ner firewall gerät... na danke. Ich hab den jetz auch deinstalliert und weitergesucht, was passendes gefunden und nach 30 min war alles so wie ichs haben wollte.

Ich habs natürlich auch auf mehreren PC's versucht. Wenn ihr den Fehler mit Lösung gefunden habt, probier ich den Apache gern nochmal aus.
Desertfury
 
Posts: 3
Joined: 14. June 2004 22:01

PreviousNext

Return to Apache

Who is online

Users browsing this forum: No registered users and 4 guests