Zur Zeit nutze ich unter Suse 10.1 einen Apache 2.2.0.21 und möchte nun auf den 2.2.9 umsteigen.
In Zuge dessen möchte ich auch vom Prefork auf Worker umstellen, da ich glaube, dass die für uns am besten geeignet ist, da die Zugriffe auf unser Portal ziehmlich in die Höhe gegangen sind.
Nun meine vielleicht blöde Frage:
Ich brauche für das ./configure meine bisherigen Einstellungen.
Gibt es eine Möglichkeit so wie in phpinfo(); für PHP ersichtlich, eine Ausgabe zu erstellen mit dem momentanen ./configure?
Ich bin noch nicht so extrem sattelfest in der Sache und ich kompiliere den Apachen zum Ersten mal.
Fals diehnlich hier der Auszug aus der server-tuning.conf und aus der apache2:
- Code: Select all
/etc/apache2/server-tuning.conf
##
## Server-Pool Size Regulation (MPM specific)
##
# the MPM (multiprocessing module) is not a dynamically loadable module in the
# sense of other modules. It is a compile time decision which one is used. We
# provide different apache2 MPM packages, containing different httpd2 binaries
# compiled with the available MPMs. See APACHE_MPM in /etc/sysconfig/apache2.
# prefork MPM
<IfModule prefork.c>
# number of server processes to start
StartServers 1
# minimum number of server processes which are kept spare
MinSpareServers 2
# maximum number of server processes which are kept spare
MaxSpareServers 5
# highest possible MaxClients setting for the lifetime of the Apache process.
ServerLimit 40
# maximum number of server processes allowed to start
MaxClients 40
# maximum number of requests a server process serves
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#maxrequestsperchild
MaxRequestsPerChild 4000
</IfModule>
# worker MPM
<IfModule worker.c>
# initial number of server processes to start
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#startservers
StartServers 3
# minimum number of worker threads which are kept spare
MinSpareThreads 25
# maximum number of worker threads which are kept spare
MaxSpareThreads 75
# upper limit on the configurable number of threads per child process
ThreadLimit 64
# maximum number of simultaneous client connections
MaxClients 150
# number of worker threads created by each child process
ThreadsPerChild 25
# maximum number of requests a server process serves
# http://httpd.apache.org/docs/2.2/mod/mpm_common.html#maxrequestsperchild
MaxRequestsPerChild 10000
</IfModule>
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 150
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 2
#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.2/mod/core.html#enablemmap
#
#EnableMMAP off
#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.2/mod/core.html#enablesendfile
#
#EnableSendfile off
#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
- Code: Select all
/etc/sysconfig/apache2
## Path: Network/WWW/Apache2
## Description: Configuration for Apache 2
## Type: string
## Default: ""
## ServiceRestart: apache2
#
# Here you can name files, separated by spaces, that should be Include'd from
# httpd.conf.
#
# This allows you to add e.g. VirtualHost statements without touching
# /etc/apache2/httpd.conf itself, which makes upgrading easier.
#
APACHE_CONF_INCLUDE_FILES=""
## Type: string
## Default: ""
## ServiceRestart: apache2
#
# Here you can name directories, separated by spaces, that should be Include'd
# from httpd.conf.
#
# All files contained in these directories will be recursively included by apache.
# If a pattern like *.conf is appended, apache will use it.
#
# Examples: "/etc/apache2/my_conf/"
# "/etc/apache2/virtual_hosts/*.conf"
# "local/*.conf /srv/www/virtual/"
#
APACHE_CONF_INCLUDE_DIRS=""
## Type: string
## Default: "actions alias auth_basic authz_host authn_file authz_groupfile authz_default authz_user autoindex cgi dir env expires include log_config mime negotiation setenvif ssl suexec userdir php5"
## ServiceRestart: apache2
#
# [It might look silly to not simply edit httpd.conf for the LoadModule statements.
# However, since the LoadModule statements might need an absolute path to the modules,
# switching between MPMs can be quite a hassle. It's easier to just give the names here.]
#
# * list of all modules shipped with the base distribution:
#
# actions alias asis auth_basic auth_digest authn_alias authn_anon
# authn_dbd authn_dbm authn_default authn_file authnz_ldap authz_dbm
# authz_default authz_groupfile authz_host authz_owner authz_user
# autoindex bucketeer cache case_filter case_filter_in cern_meta cgi
# charset_lite dav dav_fs dav_lock dbd deflate dir disk_cache dumpio
# echo env expires ext_filter file_cache filter headers ident imagemap
# include info ldap log_config log_forensic logio mem_cache mime mime_magic
# negotiation optional_fn_export optional_fn_import optional_hook_export
# optional_hook_import proxy proxy_ajp proxy_balancer proxy_connect
# proxy_ftp proxy_http rewrite setenvif speling ssl status suexec unique_id
# userdir usertrack version vhost_alias
#
# see http://httpd.apache.org/docs-2.2/mod/ !
#
# * It pays to use IfDefine statements... like
# <IfModule mod_xyz.c>
# ....
# </IfModule>
#
# * In the APACHE_MODULES variable, you can use mod_xyz or just xyz syntax.
# You may also name an absolute path if you like.
#
# * NOTE ON MOD_SSL: before you can enable this module, you need a server certificate.
# A test certificate can be created by entering
# 'cd /usr/share/doc/packages/apache2; ./certificate.sh' as root.
# Also, you need to set the ServerName inside the <VirtualHost _default_:443>
# block to the fully qualified domain name (see /etc/HOSTNAME).
#
# * if your server certificate is protected by a passphrase you should increase the
# APACHE_START_TIMEOUT (see above)
#
# * modules listed here will be ignored if they are not installed
#
#
# EXAMPLES:
#
# fairly minimal
# APACHE_MODULES="authz_host alias auth dir log_config mime setenvif"
#
# apache's default installation
# APACHE_MODULES="authz_host actions alias asis auth autoindex cgi dir imap include log_config mime negotiation setenvif status userdir"
# your settings
#
#
# -> Original <- APACHE_MODULES="actions alias auth_basic authn_file authz_host authz_groupfile authz_default authz_user authn_dbm autoindex cgi dir env expires include log_config mime negotiation setenvif ssl suexec userdir php5 rewrite geoip"
#
#APACHE_MODULES="actions alias auth_basic authn_file authz_host authz_groupfile authz_default authz_user authn_dbm cgi dir env log_config mime setenvif suexec userdir php5 rewrite status geoip deflate"
APACHE_MODULES="actions alias auth_basic authn_file authz_host authz_groupfile authz_default authz_user authn_dbm cgi dir env log_config mime setenvif suexec php5 rewrite geoip deflate"
## Type: string
## Default: ""
## ServiceRestart: apache2
#
# Additional server flags:
#
# Put here any server flags ("Defines") that you want to hand over to
# httpd at start time, or other command line flags.
#
# Background: Any directives within an <IfDefine flag>...</IfDefine>
# section are only processed if the flag is defined.
# This allows to write configuration which is active only in a
# special cases, like during server maintenance, or for testing
# something temporarily.
#
# Notably, to enable SSL support, 'SSL' needs to be added here.
# To enable the server-status, 'STATUS' needs to be added here.
#
# It does not matter if you write flag1, -D flag1 or -Dflag1.
# Multiple flags can be given as "-D flag1 -D flag2" or simply "flag1 flag2".
#
# Specifying such flags here is equivalent to giving them on the commandline.
# (e.g. via rcapache2 start -DReverseProxy)
#
# Example:
# "SSL STATUS AWSTATS SVN_VIEWCVS no_subversion_today"
#
APACHE_SERVER_FLAGS="SSL"
## Type: string
## Default: ""
## ServiceRestart: apache2
#
# Which config file do you want to use?
# (if not set, /etc/apache2/httpd.conf is used.)
# It is unusual to need to use this setting.
#
APACHE_HTTPD_CONF=""
## Type: list(prefork,worker)
## Default: ""
## ServiceRestart: apache2
#
# MPM (multi-processing module) to use.
#
# Needed to determine with which MPM apache will run, as well as
# against which header files modules will be built.
#
# If not set, the system will simply pick one of the installed MPMs.
#
# The implementation of the logic is in /usr/share/apache2/find_mpm,
# a script which can be used standalone as well if needed.
#
APACHE_MPM=""
## Type: string
## Default: ""
## ServiceReload: apache2
#
# email address of the server administrator (ServerAdmin directive)
# This address is added to the server's responses if APACHE_SERVERSIGNATURE
# is set to "email".
#
# If empty ("") it defaults to webmaster@$FQHOSTNAME, where FQHOSTNAME is
# taken from /etc/HOSTNAME.
#
# Note that ServerAdmin directives inside VirtualHost statements are not
# changed, even not the one in the stock SSL virtual host block.
#
APACHE_SERVERADMIN=""
## Type: string
## Default: ""
## ServiceReload: apache2
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
#
APACHE_SERVERNAME=""
## Type: integer
## Default: 2
#
# timeout during server startup (seconds)
# after this time, the start script decides wether the httpd process started without error.
#
# Increase it, if you use mod_ssl and your certificate is passphrase protected!
#
APACHE_START_TIMEOUT="2"
## Type: list(on,off,email)
## Default: "on"
## ServiceReload: apache2
#
# Configures the footer on server-generated documents
# This correlates to the ServerSignature directive.
#
APACHE_SERVERSIGNATURE="on"
## Type: list(debug,info,notice,warn,error,crit,alert,emerg)
## Default: "warn"
## ServiceReload: apache2
#
# LogLevel: Control the number of messages logged to the error_log.
#
APACHE_LOGLEVEL="warn"
## Type: string
## Default: "/var/log/apache2/access_log combined"
## ServiceRestart: apache2
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrarywise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
# Simply set it to empty, if you configure it yourself somewhere else.
#
# Examples:
#
# If you would like to have agent and referer logfiles:
#
# setting it to "/var/log/apache2/referer_log referer, /var/log/apache2/agent_log agent"
# corresponds to
# CustomLog /var/log/apache2/referer_log referer
# CustomLog /var/log/apache2/agent_log agent
#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format):
#
# setting it to "/var/log/apache2/access_log combined"
# corresponds to
# CustomLog /var/log/apache2/access_log combined
#
APACHE_ACCESS_LOG="/var/log/apache2/access_log combined"
## Type: list(On,Off,DNS)
## Default: "Off"
## ServiceReload: apache2
#
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
#
APACHE_USE_CANONICAL_NAME="off"
## Type: list(Major,Minor,Minimal,ProductOnly,OS,Full)
## Default: "OS"
## ServiceReload: apache2
#
# How much information the server response header field contains about the server.
# (installed modules, versions, etc.)
# see http://httpd.apache.org/docs-2.2/mod/core.html#servertokens
#
APACHE_SERVERTOKENS="OS"
## Type: list(on,off)
## Default: "off"
## ServiceReload: apache2
#
# If mod_status is used, include extended information about the server, like
# CPU usage, in the status report. It is a server-wide setting, and it can cost
# some performance!
#
APACHE_EXTENDED_STATUS="off"
## Type: list(on,off)
## Default: "off"
## ServiceRestart: apache2
#
# Enable buffered logging
#
APACHE_BUFFERED_LOGS="off"
## Type: integer
## Default: 300
## ServiceReload: apache2
#
# Timeout: The number of seconds before receives and sends time out.
# It is a server wide setting.
#
APACHE_TIMEOUT="300"
Wie müsste hier mein ./configure aussehen?
Vielen Dank!