Xampp Panel: Apache/MySQL lassen sich nicht starten

Irgendwelche Probleme mit XAMPP für Windows? Dann ist hier genau der richtige Ort um nachzufragen.

Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby fullenchilada » 08. April 2021 09:34

Schönen guten Morgen in die Runde,

vorab möchte ich erwähnen, dass ich die anderen Lösungsvorschläge, die ich finden konnte, bereits getestet habe (ich hoffe es waren alle...ok, wahrscheinlich nicht).

Gestern konnte ich im Xampp Panel Apache und MySQL noch starten. Nachdem ich gestern abend den Rechner runter gefahren habe, kam wohl ne Meldung von Windows in Zusammenhang mit dem Panel, hatte mir da aber nix weiteres gedacht bei. Wahrscheinlich ne Meldung über das vorzeitige Beenden der Anwendung oder so etwas in der Richtung.

Heute morgen dann die folgende Meldung im Panel:

Code: Select all
10:15:56  [main]    Initialisere Control Panel
10:15:56  [main]    Windows Version:  Home  64-bit
10:15:56  [main]    XAMPP Version: 7.2.0
10:15:56  [main]    Control Panel Version: 3.2.2  [ Compiled: Nov 12th 2015 ]
10:15:56  [main]    Dein Benutzerprofil besitzt keine Administratorenrechte! Das reicht aus für die meisten
10:15:56  [main]    Anwendungsfunktionen, aber wann immer du etwas mit Windows-Diensten tun möchtest,
10:15:56  [main]    wird eine Sicherheitsabfrage erscheinen oder etwas wird garnicht erst funktionieren!
10:15:56  [main]    Also denke daran diese Anwendung mit Administratorrechten zu starten!
10:15:56  [main]    XAMPP Installationsverzeichnis: "e:\xampp\"
10:15:56  [main]    Voraussetzungen werden geprüft
10:15:56  [main]    Alle Voraussetzungen sind erfüllt
10:15:56  [main]    Initialisiere Module
10:15:56  [main]    Starte Check-Timer
10:15:56  [main]    Control Panel bereit
10:15:58  [Apache]    Versuche Apache zu starten...
10:15:58  [Apache]    Statusänderung erkannt: gestartet
10:15:59  [Apache]    Statusänderung erkannt: gestoppt
10:15:59  [Apache]    Fehler: Apache wurde unerwartet beendet
10:15:59  [Apache]    Ursache könnte ein geblockter Port, fehlende Abhängigkeiten,
10:15:59  [Apache]    fehlende Berechtigungen, ein Absturz oder ein Abbruch einer anderen Methode sein.
10:15:59  [Apache]    Drücke den Logs Button um error logs zu sehen und prüfe
10:15:59  [Apache]    im Windows Event Viewer für weitere Hinweise
10:15:59  [Apache]    Wenn du weitere Hilfe benötigst, kopiere den kompletten Inhalt des Log Fensters
10:15:59  [Apache]    und füge ihn als Ergänzung in einem neuen Forum Eintrag hinzu.
10:16:10  [Apache]    Statusänderung erkannt: gestartet
10:16:11  [Apache]    Statusänderung erkannt: gestoppt
10:16:11  [Apache]    Fehler: Apache wurde unerwartet beendet
10:16:11  [Apache]    Ursache könnte ein geblockter Port, fehlende Abhängigkeiten,
10:16:11  [Apache]    fehlende Berechtigungen, ein Absturz oder ein Abbruch einer anderen Methode sein.
10:16:11  [Apache]    Drücke den Logs Button um error logs zu sehen und prüfe
10:16:11  [Apache]    im Windows Event Viewer für weitere Hinweise
10:16:11  [Apache]    Wenn du weitere Hilfe benötigst, kopiere den kompletten Inhalt des Log Fensters
10:16:11  [Apache]    und füge ihn als Ergänzung in einem neuen Forum Eintrag hinzu.


Die Log Files sind komischerweise alle von 2017 oder 2018, nix dabei von 2021.


Hab dann mal im Forum hier geschaut und den Lösungsvorschlag mit dem Start der apache_start.bat versucht.

Daraufhin kam die folgende Meldung:
httpd.exe: Syntax error on line 72 of E:/xampp/apache/conf/httpd.conf: Cannot load modules/mod_access_compat.so into server: %1 ist keine zul\xe4ssige Win32-Anwendung.

Keine Ahnung, warum da das Verzeichnis E steht, weil ich Xampp ja eigentlich unter C installiert habe.

Bin leider kein Xampp Profi und nutze die Anwendung auch nur hin und wieder einmal, wenn ich offline ne Wordpress Seite erstellen möchte.

Würde mich über Hilfe freuen und wünschen Euch allen noch ne schöne Woche.

Grüße
Heiko
fullenchilada
 
Posts: 21
Joined: 08. April 2021 09:22
XAMPP version: 3.2.2
Operating System: Win 10

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby Altrea » 08. April 2021 10:02

Hallo Heiko,

fullenchilada wrote:10:15:56 [main] XAMPP Installationsverzeichnis: "e:\xampp\"

fullenchilada wrote:Die Log Files sind komischerweise alle von 2017 oder 2018, nix dabei von 2021.

fullenchilada wrote:Hab dann mal im Forum hier geschaut und den Lösungsvorschlag mit dem Start der apache_start.bat versucht.

Daraufhin kam die folgende Meldung:
httpd.exe: Syntax error on line 72 of E:/xampp/apache/conf/httpd.conf: Cannot load modules/mod_access_compat.so into server: %1 ist keine zul\xe4ssige Win32-Anwendung.

fullenchilada wrote:Keine Ahnung, warum da das Verzeichnis E steht, weil ich Xampp ja eigentlich unter C installiert habe.

XAMPP (zumindest die Version die du gestartet hast) scheint hier anderer Meinung zu sein.
Hast du vielleicht doch mehrere XAMPP Installations auf deiner Platte rumliegen?
Oder hast du XAMPP kürzlich verschoben?

Wir müssen zuerst ganz sicher sein, dass du an der korrekten XAMPP Installation herumdoktorst.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby fullenchilada » 08. April 2021 11:13

Oh ups, scheinbar is auf dem E Verzeichnis auch noch eine drauf. Hab aber bisher immer mit dem Panel unter C gearbeitet.
fullenchilada
 
Posts: 21
Joined: 08. April 2021 09:22
XAMPP version: 3.2.2
Operating System: Win 10

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby Altrea » 08. April 2021 11:37

fullenchilada wrote:Oh ups, scheinbar is auf dem E Verzeichnis auch noch eine drauf. Hab aber bisher immer mit dem Panel unter C gearbeitet.

Das heißt aber auch, dass die Log Dateien auf C:\ ( z.B.: C:\xampp\apache\logs\error.log ) Einträge haben sollten?
Und das bedeutet auch, dass du das richtige control panel startest (wenn als Startmenü Verknüpfung oder Desktop Verknüpfung, dann kontrolliere bitte den Pfad).
Und wenn das alles stimmt, das Problem aber immernoch existiert, dann müssen wir uns die Pfade genauer ansehen. Aber kläre erstmal das oben genannte.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby fullenchilada » 08. April 2021 11:48

also ich geh immer unter C ins Verzeichnis rein und starte da die .exe Datei, keine Ahnung warum, mach ich halt immer so.

Also unter dem genannten Pfad zur Log Datei gibts einiges an Info, kann ich das einfach so alles hier rein posten?
fullenchilada
 
Posts: 21
Joined: 08. April 2021 09:22
XAMPP version: 3.2.2
Operating System: Win 10

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby Altrea » 08. April 2021 11:52

fullenchilada wrote:Also unter dem genannten Pfad zur Log Datei gibts einiges an Info, kann ich das einfach so alles hier rein posten?

Musst du nicht, wichtig ist nur, dass die Einträge dort aktuelle Zeitstempel haben.
Du könntest mal die Datei C:\xampp\setup_xampp.bat per Doppelklick einmalig ausführen, um die Pfade zu korrigieren, falls welche falsch sind.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby fullenchilada » 08. April 2021 11:55

Also die Zeitstempel in der Log Datei sind alle vom März, da ist nix drin vom April, komisch

Hab die setup_xampp.bat Datei ausgeführt, soweit kam da auch keine Fehlermeldung. Im Kontrol-Panel kann ich den Apache und die MySql leider trotzdem (noch) nicht starten.
fullenchilada
 
Posts: 21
Joined: 08. April 2021 09:22
XAMPP version: 3.2.2
Operating System: Win 10

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby Altrea » 08. April 2021 12:01

fullenchilada wrote:Also die Zeitstempel in der Log Datei sind alle vom März, da ist nix drin vom April, komisch

Das ist in der Tat komisch, besonders wenn du sagst du hast XAMPP gestern noch erfolgreich starten können.
Was ist der Inhalt deiner C:\apache\conf\httpd.conf Datei?
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby fullenchilada » 08. April 2021 12:04

Code: Select all
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
Define SRVROOT "C:/xampp/apache"

ServerRoot "C:/xampp/apache"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule brotli_module modules/mod_brotli.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule http2_module modules/mod_http2.so
LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule md_module modules/mod_md.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_http2_module modules/mod_proxy_http2.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule socache_redis_module modules/mod_socache_redis.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.so

<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin postmaster@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
#
<Directory />
    AllowOverride none
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/xampp/htdocs"
<Directory "C:/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
    Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</IfModule>

#
# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/xampp/cgi-bin">
    AllowOverride All
    Options None
    Require all granted
</Directory>

<IfModule headers_module>
    #
    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
    # backend servers which have lingering "httpoxy" defects.
    # 'Proxy' request header is undefined by the IETF, not listed by IANA
    #
    RequestHeader unset Proxy early
</IfModule>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl .asp

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile "conf/magic"
</IfModule>


#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf
# Implements a proxy/gateway for Apache.
Include "conf/extra/httpd-proxy.conf"
# Various default settings
Include "conf/extra/httpd-default.conf"
# XAMPP settings
Include "conf/extra/httpd-xampp.conf"

# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

# XAMPP: We disable operating system specific optimizations for a listening
# socket by the http protocol here. IE 64 bit make problems without this.

AcceptFilter http none
AcceptFilter https none
# AJP13 Proxy
<IfModule mod_proxy.c>
<IfModule mod_proxy_ajp.c>
Include "conf/extra/httpd-ajp.conf"
</IfModule>
</IfModule>
Include "C:C:/xampp/apps/wordpress/conf/httpd-prefix.conf"
                   


hab die jetzt mit nem Text Editor aufgemacht, hoffe, das hat jetzt keine schwerwiegenden Folgen.
fullenchilada
 
Posts: 21
Joined: 08. April 2021 09:22
XAMPP version: 3.2.2
Operating System: Win 10

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby Altrea » 08. April 2021 12:07

OK, die Pfade sehen gut aus, bis auf die letzte Zeile:
Include "C:C:/xampp/apps/wordpress/conf/httpd-prefix.conf"

Die sollte in jedem Fall korrigiert werden.

Anschließend kannst du nochmal versuchen Apache über C:\xampp\apache_start.bat zu starten und berichten, was du dort aus Rückmeldung bekommst.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby fullenchilada » 08. April 2021 12:12

Also den Apache kann ich übers Panel jetzt starten, die MySQL will noch nicht
fullenchilada
 
Posts: 21
Joined: 08. April 2021 09:22
XAMPP version: 3.2.2
Operating System: Win 10

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby Altrea » 08. April 2021 14:04

Gut.

Für Mariadb ist die erste Anlaufstelle auch das mysql_error.log
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby fullenchilada » 08. April 2021 16:00

ok und wo genau find ich das Error Log, damit ich es hier mal posten kann?
fullenchilada
 
Posts: 21
Joined: 08. April 2021 09:22
XAMPP version: 3.2.2
Operating System: Win 10

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby fullenchilada » 08. April 2021 16:17

Ok gefunden :-)

Nur leider sind das zu viele Zeichen, als dass ich die hier posten könnte. Oder brauchst Du nur die letzten paar Zeilen?
fullenchilada
 
Posts: 21
Joined: 08. April 2021 09:22
XAMPP version: 3.2.2
Operating System: Win 10

Re: Xampp Panel: Apache/MySQL lassen sich nicht starten

Postby Altrea » 08. April 2021 17:39

Die letzten ~50 Zeilen sollten reichen. Du erkennst ja am Datumsstempel, was zusammengehört.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 11926
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 11 Pro x64

Next

Return to XAMPP für Windows

Who is online

Users browsing this forum: No registered users and 31 guests