[gelöst]Apache startet nicht wegen Anwendungskonfiguration

Irgendwelche Probleme mit XAMPP für Windows? Dann ist hier genau der richtige Ort um nachzufragen.

[gelöst]Apache startet nicht wegen Anwendungskonfiguration

Postby sycon » 27. October 2011 21:19

Hallo und guten Abend,

bin ein Anfänger und versuche gerade für ein Projekt die aktuelle XAMPP 1.7.7 zu installieren. Der XAMPP-Dienst, MySQL und sogar FileZilla laufen als Dienst. Nur Apache läßt sich nicht als Dienst installieren und auch nicht von Hand starten. Wenn ich im Control Panel v3.0.2 den Dienst staten möchte, kommt folgende Fehlermeldung:

c:\xampp\apache\bin\httpd.exe
Diese Anwendung konnte nicht gestartet werden, weil die Anwendungskonfiguration nicht korrekt ist. Zur Problembehebung sollten Sie die Anwendung neu installieren[/b].

Da ich XAMPP 1.7.7 und auch XAMPP 1.7.5 bereits mehrmals installiert habe, Die Firewall und den Virenschutz ausgeschalten habe, die Windows XP SP3 Installation neu ist und keine Anwendung den Port 80 bzw. 443 belegt, geht mir inzwischen die "Luft" aus.

Hab mal die httpd.conf angehängt.

Hoffentlich kann mir jemand helfen bei meinem Problem

Grüße aus Holzkirchen

Helmut :cry:

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/xampp/apache" will be interpreted by the
# server as "/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 0.0.0.0:80
#Listen [::]:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule case_filter_module modules/mod_case_filter.so
#LoadModule case_filter_in_module modules/mod_case_filter_in.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
LoadModule env_module modules/mod_env.so
#LoadModule example_module modules/mod_example.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin postmaster@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/xampp/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks Includes ExecCGI

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride All

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
home.php home.pl home.cgi home.asp home.shtml home.html home.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#ScriptLog "logs/cgi.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog "logs/access.log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://localhost/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>
#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock "logs/cgi.sock"
</IfModule>

#
# "/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/xampp/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig "conf/mime.types"

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
AddHandler cgi-script .cgi .pl .asp

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
</IfModule>

<IfModule mime_magic_module>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
MIMEMagicFile "conf/magic"
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# XAMPP specific settings
Include "conf/extra/httpd-xampp.conf"

# Perl settings
Include "conf/extra/httpd-perl.conf"

# Server-pool management (MPM specific)
Include "conf/extra/httpd-mpm.conf"

# Multi-language error messages
Include "conf/extra/httpd-multilang-errordoc.conf"

# Fancy directory listings
Include "conf/extra/httpd-autoindex.conf"

# Language settings
Include "conf/extra/httpd-languages.conf"

# User home directories
Include "conf/extra/httpd-userdir.conf"

# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"

# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"

# Distributed authoring and versioning (WebDAV)
# Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation
# Include "conf/extra/httpd-dav.conf"

# Implements a proxy/gateway for Apache.
Include "conf/extra/httpd-proxy.conf"

# Various default settings
Include "conf/extra/httpd-default.conf"

# Secure (SSL/TLS) connections
Include "conf/extra/httpd-ssl.conf"
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
SSLSessionCache "shmcb:logs/ssl.scache(512000)"
SSLSessionCacheTimeout 300
</IfModule>

# AJP13 Proxy
<IfModule mod_proxy.c>
<IfModule mod_proxy_ajp.c>
Include "conf/extra/httpd-ajp.conf"
</IfModule>
</IfModule>
sycon
 
Posts: 4
Joined: 27. October 2011 20:46
Operating System: win xp SP3, win2008 Standard

Re: Apache startet nicht wegen Anwendungskonfiguration

Postby Altrea » 27. October 2011 21:25

Hallo Helmut,

Wie lautet die Fehlermeldung denn, wenn du Apache NICHT versuchst als Dienst zu starten, sondern manuell, oder die Batch Datei über die Eingabeaufforderung?
Auch immer einen Blick wert ist der Apache error.log, der sich in \xampp\apache\logs\.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 8290
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 10 Pro x64

Re: Apache startet nicht wegen Anwendungskonfiguration

Postby sycon » 27. October 2011 21:32

Hallo Altrea,

danke für Deine schnelle Antwort.

Wenn ich versuch über die Batch-Datei zu starten, kommt die Fehlermeldung "Das angegebe Programm kann nicht ausgeführt werden", wenn ich httpd.exe direkt starte, kommt die Fehlermeldung wie im ersten Beitrag. Ich hab auch keine Log-Datei.
sycon
 
Posts: 4
Joined: 27. October 2011 20:46
Operating System: win xp SP3, win2008 Standard

Re: Apache startet nicht wegen Anwendungskonfiguration

Postby Altrea » 27. October 2011 22:42

Anhand der Pfade vermute ich, dass du das setup_xampp.bat Script nicht ausgeführt hast und daher alle Pfade noch relativ sind. Um Windows Services aber nutzen zu können werden absolute Pfade benötigt.

Die zweite Sache die du prüfen solltest ist, ob du das Microsoft Visual C++ 2008 SP1 Redistributable Package (x86) installiert hast. Diese Runtime wird benötigt um die VC9 kompilierte XAMPP Version zum Laufen zu bewegen.
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 8290
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 10 Pro x64

Re: Apache startet nicht wegen Anwendungskonfiguration

Postby sycon » 28. October 2011 08:48

Guten Morgen Altera,

danke für die Infos. Problem ist gelöst. Nachdem ich Visual C++ installiert habe, lief die erneute Installation ohne Probleme. Leider bekommt man keinerlei Infos oder Fehlermeldungen wenn Visual C++ fehlt. Das setup_xampp Script wird nicht ausgeführt und kann auch nicht manuell gestartet werden. Ohne Deine Hilfe hätte ich den Fehler nie gefunden. Schön wäre ein Hinweis auf der Apachefriends-Seite was alles benötigt wird für die Installation von XAMPP um auch Anfängern wie meinereiner die Installation ohne Probleme zu ermöglichen.
Nochmals Danke und ein schönes (sonniges) Wochende

Gruß
Helmut
sycon
 
Posts: 4
Joined: 27. October 2011 20:46
Operating System: win xp SP3, win2008 Standard

Re: Apache startet nicht wegen Anwendungskonfiguration

Postby Altrea » 28. October 2011 15:42

sycon wrote:Guten Morgen Altera

Guten Tag Helumt :wink:

sycon wrote:Das setup_xampp Script wird nicht ausgeführt und kann auch nicht manuell gestartet werden.

Was ungewöhnlich ist. Ist dieser Umstand auch nach dem installieren der Runtime so?
Normalerweise solltest du die Datei zumindest von Hand starten können.

sycon wrote:Ohne Deine Hilfe hätte ich den Fehler nie gefunden.

Dafür ist dieses Forum ja auch da. Mission erfüllt :D

sycon wrote:Leider bekommt man keinerlei Infos oder Fehlermeldungen wenn Visual C++ fehlt.

Das ist leider wahr. Dem Entwicklerteam ist dieser Umstand bekannt und da wird im nächsten Release hoffentlich eine Testroutine für eingebaut, die die Runtime bereitstellt, falls sie nicht auf dem Rechner vorhanden ist.
Mit VC9 sind alle noch ein bißchen grün hinter den Ohren, da bitte ich um Verständnis :D

sycon wrote:Schön wäre ein Hinweis auf der Apachefriends-Seite was alles benötigt wird für die Installation von XAMPP um auch Anfängern wie meinereiner die Installation ohne Probleme zu ermöglichen.

Die Seite bedarf generell einer Überarbeitung, denke ich. DIe Informationen dort beziehen sich noch/nur auf Vista und könnten auf aktuelle Probleme erweitert werden.

sycon wrote:Nochmals Danke und ein schönes (sonniges) Wochende

Danke, das wünsche ich dir auch 8)
We don't provide any support via personal channels like PM, email, Skype, TeamViewer!

It's like porn for programmers 8)
User avatar
Altrea
AF Moderator
 
Posts: 8290
Joined: 17. August 2009 13:05
XAMPP version: several
Operating System: Windows 10 Pro x64


Return to XAMPP für Windows

Who is online

Users browsing this forum: wodim and 19 guests

cron