Error 403 Zugriff verweigert

Irgendwelche Probleme mit XAMPP für Windows? Dann ist hier genau der richtige Ort um nachzufragen.

Error 403 Zugriff verweigert

Postby uhuwe » 15. November 2009 20:44

Hallo erstmal,

ich habe in die hosts noch:
Code: Select all
127.0.0.1 www.fahnensex.de (ich weiß... ...etwas komischer domänenname).


Danach in die httpd-duserdir.conf:
Code: Select all
<Directory d:/homepagefiles>
Allow from all
</Directory>

und httpd-vhosts.conf
Code: Select all
<VirtualHost *:80>
    ServerAdmin ugoessner@fahnensex.de
    DocumentRoot "d:/homepagefiles"
    ServerName www.fahnensex.de
    ##ServerAlias www.dummy-host.localhost
    ##ErrorLog "logs/dummy-host.localhost-error.log"
    ##CustomLog "logs/dummy-host.localhost-access.log" combined
</VirtualHost>


Das Homepagefiles-Verzeichnis hat Vollzugriffsrechte.

Bei http://localhost und http://www.fahnensex.de kommt die Error 403-Seite.

Falls wichtig: Die Internetverbindung läuft über einen Router.

VielenDank im Voraus.
uhuwe
 
Posts: 17
Joined: 30. January 2005 15:33
Location: Wedemark OT-Mellendorf
XAMPP version: lampp
Operating System: linux mint 17.3

Re: Error 403 Zugriff verweigert

Postby Nobbie » 15. November 2009 21:18

>Danach in die httpd-duserdir.conf

Wird die auch includiert?
Nobbie
 
Posts: 8770
Joined: 09. March 2008 13:04

Re: Error 403 Zugriff verweigert

Postby uhuwe » 15. November 2009 21:22

Nobbie wrote:>Danach in die httpd-duserdir.conf

Wird die auch includiert?

Ja.

Entschuldigung: Habe mich etwas verschrieben. Ich meine: httpd-userdir.
uhuwe
 
Posts: 17
Joined: 30. January 2005 15:33
Location: Wedemark OT-Mellendorf
XAMPP version: lampp
Operating System: linux mint 17.3

Re: Error 403 Zugriff verweigert

Postby Nobbie » 16. November 2009 13:24

Ist das eigentlich die komplette httpd-vhosts.conf?

Wenn nicht, kann Dir sowieso niemand helfen, man muss schon alles sehen, um den Fehler finden zu können.
Nobbie
 
Posts: 8770
Joined: 09. March 2008 13:04

Re: Error 403 Zugriff verweigert

Postby uhuwe » 17. November 2009 12:32

httpd-vhosts.conf
Code: Select all
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# Use name-based virtual hosting.
#
NameVirtualHost *:80
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>
    ServerAdmin ugoessner@fahnensex.de
    DocumentRoot "d:/homepagefiles"
    ServerName www.fahnensex.de
    ##ServerAlias www.dummy-host.localhost
    ##ErrorLog "logs/dummy-host.localhost-error.log"
    ##CustomLog "logs/dummy-host.localhost-access.log" combined
</VirtualHost>
##<VirtualHost *:80>
    ##ServerAdmin postmaster@dummy-host2.localhost
    ##DocumentRoot "C:/xampp/htdocs/dummy-host2.localhost"
    ##ServerName dummy-host2.localhost
    ##ServerAlias www.dummy-host2.localhost
    ##ErrorLog "logs/dummy-host2.localhost-error.log"
    ##CustomLog "logs/dummy-host2.localhost-access.log" combined
##</VirtualHost>
uhuwe
 
Posts: 17
Joined: 30. January 2005 15:33
Location: Wedemark OT-Mellendorf
XAMPP version: lampp
Operating System: linux mint 17.3

Re: Error 403 Zugriff verweigert

Postby Wiedmann » 17. November 2009 12:56

uhuwe wrote:
Nobbie wrote:
uhuwe wrote:Danach in die httpd-duserdir.conf:

Wird die auch includiert?

Ja.

Würde mal eher sagen nein (zumindest wird der Teil in dieser Datei dann nicht ausgewertet).

Bleibt dann noch die Frage, warum das in der httpd-userdir ist, und nicht direkt im VHosts.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: Error 403 Zugriff verweigert

Postby uhuwe » 17. November 2009 13:09

Wiedmann wrote:Würde mal eher sagen nein (zumindest wird der Teil in dieser Datei dann nicht ausgewertet).

Bleibt dann noch die Frage, warum das in der httpd-userdir ist, und nicht direkt im VHosts.

Normalerweise dürfte ja dann bei http://localhost keine Error 403 erscheinen, weil die ja schon in den Standardeinstellungen geregelt ist.
uhuwe
 
Posts: 17
Joined: 30. January 2005 15:33
Location: Wedemark OT-Mellendorf
XAMPP version: lampp
Operating System: linux mint 17.3

Re: Error 403 Zugriff verweigert

Postby Wiedmann » 17. November 2009 13:17

Normalerweise dürfte ja dann bei http://localhost keine Error 403 erscheinen,

"localhost" und "www.fahnensex.de" werden ja vom selben VHost bedient. Wenn beim Einen nicht tut, tut's beim Anderen natürlich auch nicht.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: Error 403 Zugriff verweigert

Postby Nobbie » 17. November 2009 13:29

uhuwe wrote:Normalerweise dürfte ja dann bei http://localhost keine Error 403 erscheinen, weil die ja schon in den Standardeinstellungen geregelt ist.


Nö, die "Standardeinstellungen" ziehen nicht, Du hast alle IPs mit Port 80 als NameBased Vhosts deklariert (dazu gehört sicherlich auch localhost).

Dann hilft eben nichts, zeige uns auch die beiden anderen conf-Dateien vollständig (httpd.conf und httpd-userdir.conf).
Nobbie
 
Posts: 8770
Joined: 09. March 2008 13:04

Re: Error 403 Zugriff verweigert

Postby uhuwe » 17. November 2009 13:52

http-userdir.conf
Code: Select all
# Settings for user home directories
#
# Required module: mod_userdir

<IfModule userdir_module>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.  Note that you must also set
# the default access control for these directories, as in the example below.
#
UserDir "My Documents/My Website"
#
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
#
<Directory "C:/Documents and Settings/*/My Documents/My Website">
    AllowOverride FileInfo AuthConfig Limit Indexes
    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
</Directory>

<Directory "d:/homepagefiles">
   AllowOverride All
   Order allow,deny
   Allow from all
</Directory>
</IfModule>

httpd.conf
Code: Select all
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/xampp/apache" will be interpreted by the
# server as "C:/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/xampp/apache"
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 0.0.0.0:80
#Listen [::]:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
##LoadModule autoindex_module modules/mod_autoindex.so # replaced with autoindex_color_module
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule case_filter_module modules/mod_case_filter.so
#LoadModule case_filter_in_module modules/mod_case_filter_in.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
LoadModule env_module modules/mod_env.so
#LoadModule example_module modules/mod_example.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#
# 3rd party modules
#
LoadModule autoindex_color_module modules/mod_autoindex_color.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin postmaster@localhost
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/xampp/htdocs"
#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI
    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All
    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all
</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"
#ScriptLog "logs/cgi.log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access.log" common
    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar
    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock "logs/cgi.sock"
</IfModule>
#
# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/xampp/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>


#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig "conf/mime.types"
    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl .asp
    # For type maps (negotiated resources):
    #AddHandler type-map var
    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>
<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile "conf/magic"
</IfModule>
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#
#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# XAMPP specific settings
Include "conf/extra/httpd-xampp.conf"
# Perl settings
Include "conf/extra/perl.conf"
# Server-pool management (MPM specific)
Include "conf/extra/httpd-mpm.conf"
# Multi-language error messages
Include "conf/extra/httpd-multilang-errordoc.conf"
# Fancy directory listings
Include "conf/extra/httpd-autoindex.conf"
# Language settings
Include "conf/extra/httpd-languages.conf"
# User home directories
Include "conf/extra/httpd-userdir.conf"
# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"
# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"
# Distributed authoring and versioning (WebDAV)
Include "conf/extra/httpd-dav.conf"
# Implements a proxy/gateway for Apache.
Include "conf/extra/httpd-proxy.conf"
# Various default settings
Include "conf/extra/httpd-default.conf"
# Secure (SSL/TLS) connections
Include "conf/extra/httpd-ssl.conf"
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    SSLSessionCache "shmcb:logs/ssl.scache(512000)"
    SSLSessionCacheTimeout 300
</IfModule>
uhuwe
 
Posts: 17
Joined: 30. January 2005 15:33
Location: Wedemark OT-Mellendorf
XAMPP version: lampp
Operating System: linux mint 17.3

Re: Error 403 Zugriff verweigert

Postby Pitze » 17. November 2009 15:27

Hej,
wie Nobbie schon sagte der NameVirtualHost überschreibt die Einstellungen in der httpd.conf es wird dir nichts anderes übrigbleiben alles andere auch in die httpd_vhorst.conf zu packen sonst wird das nichts.
Der grösste Vertrauensbruch ist der Blitzableiter auf der Kirchturmspitze
User avatar
Pitze
 
Posts: 210
Joined: 20. November 2003 21:38
Location: Huskvarna-Schweden
Operating System: Windows Vista

Re: Error 403 Zugriff verweigert

Postby Wiedmann » 17. November 2009 17:03

http-userdir.conf

Wie du siehst, werden Einstellungen in dieser Conf nicht benutzt, da das dazugehörige Modul nicht geladen ist.

Bleibt zum 2. Mal die Frage, warum du den Directory-Block da reingemacht hast, und nicht in den VHost zu dessen DocumentRoot der Block gehört?
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: Error 403 Zugriff verweigert

Postby Nobbie » 17. November 2009 17:12

Genau so einen Quatsch(!!) habe ich mir gedacht. Zum einen steht in httpd.conf dieses:

Code: Select all
...
#LoadModule userdir_module modules/mod_userdir.so
...


sinnlos ergänzt durch dieses:

Code: Select all
...
Include "conf/extra/httpd-userdir.conf"
...


d.h. es wird nicht das Modul mod_userdir.so geladen, aber die zugehörige conf-Datei includiert, und in dieser steht dann folgerichtig drin:

Code: Select all
<IfModule userdir_module>
...
--.
</IfModule>


womit die Sinnlosigkeit perfekt ist: da das entsprechende Modul ja nicht geladen ist, werden die Zeilen zwischen dieser Abfrage, ob das Modul geladen ist, nicht ausgeführt, also auch nicht die (ohnehin dort total fehlplatzierte) <Directory "d:/homepagefiles"> Direktive.

Manchmal frage ich mich (und das hier ist ein Präzedenzfall): was denkt man sich dabei, wenn man so etwas "zusammenmurkst"?? Sorry, aber es ist wirklich grauenhaft. Hier was sinnloses, dort was falschplatziertes, hier was vergessen, da was übersehen - so kriegt man schnell den Webserver grundlegend so kaputtkonfiguriert, dass man nicht mehr durchsteigt, was eigentlich wie und wo und warum passiert. Diese Aufteilung der einzelnen conf-Module hat nicht den Sinn, "Memory" oder "Puzzle" zu spielen. Sondern gezielt Direktiven dort unterzubringen, wo sie semantisch hingehören.
Nobbie
 
Posts: 8770
Joined: 09. March 2008 13:04

Re: Error 403 Zugriff verweigert

Postby uhuwe » 17. November 2009 21:20

Nobbie wrote:Genau so einen Quatsch(!!) habe ich mir gedacht. Zum einen steht in httpd.conf dieses:

Code: Select all
...
#LoadModule userdir_module modules/mod_userdir.so
...


sinnlos ergänzt durch dieses:

Code: Select all
...
Include "conf/extra/httpd-userdir.conf"
...


d.h. es wird nicht das Modul mod_userdir.so geladen, aber die zugehörige conf-Datei includiert, und in dieser steht dann folgerichtig drin:

Code: Select all
<IfModule userdir_module>
...
--.
</IfModule>


womit die Sinnlosigkeit perfekt ist: da das entsprechende Modul ja nicht geladen ist, werden die Zeilen zwischen dieser Abfrage, ob das Modul geladen ist, nicht ausgeführt, also auch nicht die (ohnehin dort total fehlplatzierte) <Directory "d:/homepagefiles"> Direktive.

Manchmal frage ich mich (und das hier ist ein Präzedenzfall): was denkt man sich dabei, wenn man so etwas "zusammenmurkst"?? Sorry, aber es ist wirklich grauenhaft. Hier was sinnloses, dort was falschplatziertes, hier was vergessen, da was übersehen - so kriegt man schnell den Webserver grundlegend so kaputtkonfiguriert, dass man nicht mehr durchsteigt, was eigentlich wie und wo und warum passiert. Diese Aufteilung der einzelnen conf-Module hat nicht den Sinn, "Memory" oder "Puzzle" zu spielen. Sondern gezielt Direktiven dort unterzubringen, wo sie semantisch hingehören.


Hab das #-Zeichen vor #LoadModule userdir_module modules/mod_userdir.so und #LoadModule vhost_alias_module modules/mod_vhost_alias.so weggemacht. Der Fehler bleibt drotzdem.
Hab den Server auch neu gestartet.
uhuwe
 
Posts: 17
Joined: 30. January 2005 15:33
Location: Wedemark OT-Mellendorf
XAMPP version: lampp
Operating System: linux mint 17.3


Return to XAMPP für Windows

Who is online

Users browsing this forum: No registered users and 7 guests