VirtualHost

Irgendwelche Probleme mit XAMPP für Windows? Dann ist hier genau der richtige Ort um nachzufragen.

Re: VirtualHost

Postby Pitze » 25. April 2009 19:09

Hej,
tröste dich als ich angefangen habe hatte ich dieselben probleme nur das ganze drum herrum ist immer anders zudem steckt man nicht drinnen im User und weis halt nicht genau was er wirklich will und denkt.
Hab mal deine Config durchgesehen zum einen liegen deine Seiten ausserhalb vom xampp Ortner(sieh mal in mein Beispiel wo ich sie hingelegt hätte)-das sollte aber erst mal nicht das problem sein.
Benutzt du die ZIP oder Installer Version? Bin nämlich ein wenig irritiert wo der ortner homepage herkommt in deiner httpd.conf kopie und wo der xampp/htdocs abgebliben ist. Zu meiner Schande muss ich gestehen das ich nicht weiss wie die Installer Version aussieht von innen aber ich denke mal das sich da so viel nicht unterscheidet.
Dann hast du deine httpd.conf auf sandman86 eingestellt und wunderst dich das er bei der anderen rumzickt. Also ich habe bis auf ein paar Abdichtungen meine httpd.conf nicht verändert zum einen Configuriert sie den Localhost (htdocs-ortner)und den Server und läd module plus die zusätzlichen conf Datein meine Seite läuft einzig über den vhost.
Bei dir sieht das anscheinend so aus das die httpd.conf deine Seite Sandmann86 Configuriert plus dein vhost beide Seiten. Du hast zwar in deiner httpd.conf beide Domain Namen aber nur einen DocumentRoot angegeben und der stimmt nun nicht mehr.
Probieren wir mal was um das Problem einzukreisen: Versetze die httpd.conf mal wieder in ihren urzustand so das sie den localhost Configuriert dann legst du deine seiten in den xampp Ortner in deinen Fall C:/webserver/xampp/sandmann86 bzw thewest und änderst die Pfade in den vhost.
mal sehen was passiert
Tip Sie mal dort vielleicht kannst du was verwenden: http://faq.kwm-web.info/doku.php und http://aktuell.de.selfhtml.org/artikel/ ... htm#conf07
Der grösste Vertrauensbruch ist der Blitzableiter auf der Kirchturmspitze
User avatar
Pitze
 
Posts: 210
Joined: 20. November 2003 21:38
Location: Huskvarna-Schweden
Operating System: Windows Vista

Re: VirtualHost

Postby Sandmann » 06. May 2009 19:51

hm das alles hat irgendwie nicht geholfen das Problem was ich nun habe ist das zwar beide Seiten gehen zumindest auf dem Server und es wird auch die richtige Seite angezeigt. Aber wenn ich von einem anderen Rechner drauf zugreifen möchte bekomme ich immer und immer wieder die XAMPP Startseite wo man sich einloggen kann und die übersicht hat was aktiviert ist und was nicht. Ich habe dieses Forum durchforstet ob sowas schonmal vorgekommen und ist der einzigste Kommentar war dort "lies dir die Anleitung durch" ( das hab ich nun schon 2 mal getan und mein WE damit verbracht).

mein Code sieht nun folgender maßen aus

vhost:
Code: Select all
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
##NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#


NameVirtualHost thewesthh.dyndns.org:80
<VirtualHost thewesthh.dyndns.org:80>
DocumentRoot C:/webserver/homepage/thewest/html
ServerName thewesthh.dyndns.org
DirectoryIndex index.html index.php
<Directory "C:/webserver/homepage/thewest/html">
Options Indexes FollowSymLinks Includes ExecCGI
Order allow,deny
Allow from all
AllowOverride All
</Directory>
</VirtualHost>

NameVirtualHost sandmann86.dyndns.org:80
<VirtualHost sandmann86.dyndns.org:80>
DocumentRoot C:/webserver/homepage/sandmann86/html
ServerName sandmann86.dyndns.org
DirectoryIndex index.html index.php
<Directory "C:/webserver/homepage/sandmann86/html">
Options Indexes FollowSymLinks Includes ExecCGI
Order allow,deny
Allow from all
AllowOverride All
</Directory>
</VirtualHost>


httpd:
Code: Select all
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/webserver/xampp/apache" will be interpreted by the
# server as "C:/webserver/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild  0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/webserver/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80


#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule autoindex_module modules/mod_autoindex.so # don't load because of mod_autoindex_color.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule mime_module modules/mod_mime.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule ssl_module modules/mod_ssl.so

LoadModule autoindex_color_module modules/mod_autoindex_color.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_remote_module modules/mod_auth_remote.so
#LoadModule sspi_auth_module modules/mod_auth_sspi.so
#LoadModule log_sql_module modules/mod_log_sql.so
#LoadModule log_sql_mysql_module modules/mod_log_sql_mysql.so
#<IfModule ssl_module>
#    LoadModule log_sql_ssl_module modules/mod_log_sql_ssl.so
#</IfModule>
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule xmlns_module modules/mod_xmlns.so
#LoadModule proxy_xml_module modules/mod_proxy_xml.so
#LoadModule bw_module modules/mod_bw.so

### SVN 1.5.4 ###
#LoadModule dav_svn_module modules/mod_dav_svn.so
#LoadModule authz_svn_module modules/mod_authz_svn.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin sandmann1986@hotmail.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#


#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/webserver/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/webserver/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI
   
    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl index.html index.htm index.shtml index.phtml
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access.log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access.log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/webserver/xampp/cgi-bin/"

</IfModule>

#
# "C:/webserver/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/webserver/xampp/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script.  For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:

   #!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file.  Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention.  The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
#

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi

    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis

    # For server-parsed imagemap files:
    #AddHandler imap-file map

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
   AddType text/html .shtml
   AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
EnableMMAP off
EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# XAMPP specific settings
Include conf/extra/httpd-xampp.conf

# Server-pool management (MPM specific)
# Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf

#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>


Include conf/extra/perl.conf


und in der host datei vom PC steht
Code: Select all
127.0.0.1  sandmann86.dyndns.org
127.0.0.1 thewesthh.dyndns.org


bitte bitte helf mir ich verzweifel!!
Sandmann
 
Posts: 19
Joined: 21. March 2009 00:28

Re: VirtualHost

Postby Wiedmann » 06. May 2009 20:00

und ist der einzigste Kommentar war dort "lies dir die Anleitung durch"

Hier hattest du allerdings u.a. auch eine Anleitung bekommen die funktioniert (bzw. was genau du an deiner ersten Konfig ändern musst).

Kennst du deine ürspr Konfig überhaupt noch und dann das was ich in meinem letzten Post geschrieben hab?
--> Da kommt dann jedenfalls nicht das heraus, was du jetzt hast.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: VirtualHost

Postby Sandmann » 06. May 2009 20:06

du meinst die config so wie sie in meinem ersten post ist? wenn du die meinst änder ich das gerne um
Sandmann
 
Posts: 19
Joined: 21. March 2009 00:28

Re: VirtualHost

Postby Wiedmann » 06. May 2009 20:12

die config ... in meinem ersten post, wenn du die meinst ...

Ich zumindest rede, wie schon gesagt, nur von der.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: VirtualHost

Postby Sandmann » 06. May 2009 20:30

so ich habe wieder alles auf die allererste config aus dem 1 post geändert.
das Problem was nun auftritt ist das unter http://sandmann86.dyndns.org und http://thewesthh.dyndns.org die gleiche Seite aufgerufen wird und nicht die thewest testseite.
Sandmann
 
Posts: 19
Joined: 21. March 2009 00:28

Re: VirtualHost

Postby Wiedmann » 06. May 2009 20:41

so ich habe wieder alles auf die allererste config aus dem 1 post geändert.

Und diese 1. Config hast du dann so wie hier beschrieben angepasst?
viewtopic.php?f=4&t=34718#p141239

Was kommt dabei raus als Config?
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: VirtualHost

Postby Sandmann » 06. May 2009 20:52

oh ich hab den Fehler beim posten eben schon selber gefunden,für alle die es interessiert:
(hatte vergessen das NameVirtualHost *:80 wieder mit reinzunehmen war ausgeklammert)

vhost:
Code: Select all
NameVirtualHost *:80

<VirtualHost *:80>
DocumentRoot C:/webserver/homepage/sandmann86/html
ServerName sandmann86.dyndns.org
DirectoryIndex index.html index.php
<Directory "C:/webserver/homepage/sandmann86/html">
Options Indexes FollowSymLinks Includes ExecCGI
Order allow,deny
Allow from all
AllowOverride All
</Directory>
</VirtualHost>

<VirtualHost *:80>
DocumentRoot C:/webserver/homepage/thewest/html
ServerName thewesthh.dyndns.org
DirectoryIndex index.html index.php
<Directory "C:/webserver/homepage/thewest/html">
Options Indexes FollowSymLinks Includes ExecCGI
Order allow,deny
Allow from all
AllowOverride All
</Directory>
</VirtualHost>


httpd:
Code: Select all
...
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
...


und die hosts datei in Window Ordner sieht so aus

Code: Select all
127.0.0.1       localhost
127.0.0.1   sandmann86.dyndns.org
127.0.0.1   thewesthh.dyndns.org


vll hilft das ja vielen

vielen vielen Dank nochmal an Wiedmann und Pietze die so viel Geduld mit mir hatten!
Sandmann
 
Posts: 19
Joined: 21. March 2009 00:28

Re: VirtualHost

Postby Xardas der Dunkle » 06. May 2009 21:06

Wofür bitte die host-datei?
Die dyndns-Adresse hat darin eigentlich absolut gar nix verloren :? http://de.wikipedia.org/wiki/Hosts#Verw ... lichkeiten
User avatar
Xardas der Dunkle
 
Posts: 482
Joined: 09. March 2008 19:40
Location: /var/www

Re: VirtualHost

Postby Wiedmann » 06. May 2009 21:32

Sandmann wrote:vielen vielen Dank nochmal an Wiedmann

Kein Problem (und du hattest es ja auch schon richtig, bis auf die "falschen" hostnamen).

Jetzt musst dir nur noch überlegen, ob du auch noch auf die XAMPP Demoseite zugreifen willst...

Xardas der Dunkle wrote:Wofür bitte die host-datei?

Bei Verwendung eines NAT-Routers (und port-forwarding), ist die bevorzugte Vorgensweise ein "dual DNS-Setup".
--> Clients im WAN (Internet) bekommen bei der Abfrage auf den Namen die WAN-IP (die der Router bei der Einwahl zugewiesen bekommt.

--> Clients im LAN (das eigene Netz hinter dem Router wo der Server drin ist) bekommen bei der Abfrage auf den Namen die LAN-IP.

Da wohl bei den wenigesten ein DNS-Server im LAN vorhanden ist (wenn überhaupt mehr Rechner vorhanden sind als der eine "Server"), trägt man das dann in die HOSTS ein.

Xardas der Dunkle wrote:Die dyndns-Adresse hat darin eigentlich absolut gar nix verloren

Genau da gehört sie hin. Man kann/sollte sich aber überlegen, ob man da 127.0.0.1 nehmen will, oder nicht die richtige LAN IP. Besser wäre die LAN IP, was aber nur geht, wenn der Server eine feste IP hat.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: VirtualHost

Postby Sandmann » 06. May 2009 22:22

naja gut ok die IP die der Router mir gibt ist ja fest die könnte ich ja noch umstellen in der host datei.
mir ging es nur darum erst einmal ein funktioniere config zu haben auf der ich aufbauen kann und diese erweitern kann und gegebenfalls verbesserungen machen kann.

hm die xampp demo seite ist mir eigentlich nicht so wichtig da ich sonst auch vieles über das control panel machen kann. ist ja nicht so das der server weit weg wäre und ich die ca.3m nicht laufen kann :)

gibt es sonst noch was was man dringend beachten sollte bezüglich der sicherheit? auch bei sql und php? hab nicht so lust das alle paar wochen die datenbank gehackt wird vom forum das auf der thewest domain laufen soll.... vll habt ihr da ein paar links für mich ansonsten mach ich mich selber mal auf die suche.(bei profis anfragen bringt meist mehr...deswegen die frage)
Sandmann
 
Posts: 19
Joined: 21. March 2009 00:28

Re: VirtualHost

Postby Pitze » 07. May 2009 05:38

Na wer sagts den das Marmelade keine kraft gibt geht doch ich kann von aussen auf deine seiten.
Punkto sicherheit wäre zu empfehlen PhpMyAdmin verzeichniss mit einer htaccess zu sichern. Der User root bei MySQL hat absolute Adminrechte es ist zu empfehlen einen User mit nur so ausreichenden rechten anzulegen wie du benötigst und dem deine Datenbanken zuortnen, den wenn du von einen Script aus auf deine DB zugreiftst benötigst du sonst das root password in klartext. So kann man zumindest den Schaden begernzen. Je nach anwendung sollte ein tägliches backup deiner DB Daten gemacht werden. PhP im safe Mode wird zwar ab Version 6 verschwinden aber so lange kann mans halt nutzen.
Google mal mit den Wotkombinationen Xampp+sicherheit oder Apache+sicherheit das selbe mit Mysql es gibt ein paar sehr interesannte seiten die zeit solltetst du dir nehmen es lohnt sich.
Pitze :D
Der grösste Vertrauensbruch ist der Blitzableiter auf der Kirchturmspitze
User avatar
Pitze
 
Posts: 210
Joined: 20. November 2003 21:38
Location: Huskvarna-Schweden
Operating System: Windows Vista

Previous

Return to XAMPP für Windows

Who is online

Users browsing this forum: No registered users and 9 guests