The index.php is displayed, but index.html do not!

Irgendwelche Probleme mit XAMPP für Windows? Dann ist hier genau der richtige Ort um nachzufragen.

The index.php is displayed, but index.html do not!

Postby Byteman » 20. October 2007 15:49

Wenn I request in browser the local virtual Server http://css.pc (local at my PC under Win XP)
the Home Page is displayed, wenn the file be named as index.php.
Wenn I change the file name into index.html or index.htm, diplayed the Message:
"Access forbidden!
There is no Index-Dokument or the directory is not writeable.
Error 403.

css.pc
10/20/07 16:26:34
Apache/2.2.4 (Win32) DAV/2 mod_ssl/2.2.4 OpenSSL/0.9.8e mod_autoindex_color PHP/5.2.3".


Here is the piece of httpd-vhosts.conf:
Code: Select all
<VirtualHost 127.0.0.11:80>
    ServerAdmin webmaster@css.pc
    DocumentRoot "C:/xampp/htdocs/www_test/css.pc/"
    ServerName css.pc
    ServerAlias www.css.pc   
    DirectoryIndex index.php index.html index.htm
</VirtualHost>


Where is the Problem?
Which file exact in this case content definition that only index.php as index file is and not any other?
And which exact instructions in this file to do this?

New instalation of XAMPP is not wanted, while under XAMPP works now more as dozend virtual websites under MySQL using.

Sory for my bad english.
Last edited by Byteman on 21. October 2007 00:25, edited 6 times in total.
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Wiedmann » 20. October 2007 16:05

Hier ist ein Ausschnitt aus https-vhosts.conf:

Diese IP "gibt es nicht".

Du willst namebased VHosts definieren und keine IP basierende.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby Byteman » 20. October 2007 16:19

Wiedmann wrote:
Hier ist ein Ausschnitt aus https-vhosts.conf:

Diese IP "gibt es nicht".

Du willst namebased VHosts definieren und keine IP basierende.


No.
The namebased vhosts works!
I.e. http://css.pc/index.html is displayed.
Or also http://css.pc wenn I change the name of the file index.html into index.php.
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Wiedmann » 20. October 2007 16:50

Was nun: Englisch oder deutsch? ...

The namebased vhosts works!
I.e. http://css.pc/index.html is displayed.

Wenn es schon einen namebased VHosts für "css.pc" gibt, wird er diesen IP basierenden VHost wohl nicht heranziehen.

Mal ebgesehen davon, dass man diese IP immer noch nicht nimmt (es gibt da nur 127.0.0.1), bleiben jetzt noch die Fragen, wie dann deine namebased VHosts definiert sind und wie deine HOSTS Datei aussieht.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby Byteman » 21. October 2007 00:05

Wiedmann wrote:Was nun: Englisch oder deutsch? ....

Sorry, ich schrieb anfangs deutsch, aber dann schien mir, daß die meistens Beiträge auf Englisch sind und entschied doch auf Englisch umsteigen damit alle mitmachen könnten.

Wenn es schon einen namebased VHosts für "css.pc" gibt, wird er diesen IP basierenden VHost wohl nicht heranziehen.
Namebased vhosts is not problem in my case: wenn I write in browser URL as IP-adress (in my case 127.0.0.11) - results are same for 127.0.0.11 wenn the index file is not index.php (i.e. index.html or index.htm):

Access vorbiden. There is no Index-Dokument or the directory is not writeable.
Error 403.

css.pc
10/20/07 16:26:34
Apache/2.2.4 (Win32) DAV/2 mod_ssl/2.2.4 OpenSSL/0.9.8e mod_autoindex_color PHP/5.2.3


The definition of the namebased virtual host "css.pc" is written in my first report above.

Mal ebgesehen davon, dass man diese IP immer noch nicht nimmt (es gibt da nur 127.0.0.1), bleiben jetzt noch die Fragen, wie dann deine namebased VHosts definiert sind und wie deine HOSTS Datei aussieht.
The file hosts has the line:
Code: Select all
127.0.0.11     css.pc www.css.pc

But the file hosts is not related to problem of displaying of directories and index files.

Seems so that the code
Code: Select all
DirectoryIndex index.php index.html index.htm

in VirtualHost definition (file httpd-vhosts.conf) don't works.
Work only first directive - index.php ?
Why?
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Wiedmann » 21. October 2007 00:31

Sorry, ich schrieb anfangs deutsch, aber dann gesehen, daß alle Beiträge auf Englisch sind und entschied doch auf Englisch umsteigen damit alle mitmachen könnten.

Deinen ersten Beitrag in Deutsch hast du im englischen Forenbereich gepostet. Von dort habe ich ihn in den deutschen Bereich verschoben, wo er sich jetzt befindet.

Und nach dem Verschieben hast du den dann in Englisch geändert. Also bist du jetzt eigentlich bei der falschen Sprache ;-)

The definition of the namebased virtual host "css.pc" is written in my first report above.

Das was du gepostet hast, ist ein IP based VHost und kein namebased VHost.

The file hosts has the line:

Wie gesagt, diese IP gibt es eigentlich nicht.

Seems so that the code ... n VirtualHost definition (file httpd-vhosts.conf) don't works.

Wei (wie schon geschrieben) dieser VHost nocht benutzt wird. Könnte natürlich auch sein, dass sich in "C:/xampp/htdocs/www_test/css.pc/" eine ".htaccess" befindet, die diese Einstellung wieder überschreibt.

Aber bevor ich hier weiter rumrätsel:
Poste doch bitte deine kompletten VHosts Definitionen.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby Byteman » 21. October 2007 00:35

Wiedmann wrote:Was nun: Englisch oder deutsch? ...

Noch mal Entschuldigung. In Eile lies ich wohl meistens nur die Überschriften, die tatsächlich meist in Englisch sind. Jetzt sehe ich, daß es doch ein deutschsprachigen Forum ist. Also dann schreibe ich weiter auf deutsch.
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Byteman » 21. October 2007 00:48

Wiedmann wrote:Poste doch bitte deine kompletten VHosts Definitionen.

OK. Also erstens es gibt keine .htaccess im Verzeichniss.
Im root Verzeichnis von css.pc gibt es nur 2 Dateien:
tutorial.css
und
eine Index-Datei.
Wenn ich nenne die Index-Datei als index.php dann ist alles OK -
die Home Page wird ordnungsgemäß im Browser geladen.
Wenn aber ich nenne die Datei in index.html um, dann kommt die Fehlerseite:


"Zugriff verweigert!
Der Zugriff auf das angeforderte Verzeichnis ist nicht möglich. Entweder ist kein Index-Dokument vorhanden oder das Verzeichnis ist zugriffsgeschützt.
Sofern Sie dies für eine Fehlfunktion des Servers halten, informieren Sie bitte den Webmaster hierüber.
Error 403
css.pc
10/21/07 01:44:15
Apache/2.2.4 (Win32) DAV/2 mod_ssl/2.2.4 OpenSSL/0.9.8e mod_autoindex_color PHP/5.2.3"

Jetzt hier die ganze Inhalt der Datei httpd-vhosts.conf:

Code: Select all
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
##NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
##<VirtualHost *:80>
##    ServerAdmin webmaster@dummy-host.example.com
##    DocumentRoot /www/docs/dummy-host.example.com
##    ServerName dummy-host.example.com
##    ServerAlias www.dummy-host.example.com
##    ErrorLog @rel_logfiledir@/dummy-host.example.com-error_log
##    CustomLog @rel_logfiledir@/dummy-host.example.com-access_log common
##</VirtualHost>

##<VirtualHost *:80>
##    ServerAdmin webmaster@dummy-host2.example.com
##    DocumentRoot /www/docs/dummy-host2.example.com
##    ServerName dummy-host2.example.com
##    ErrorLog @rel_logfiledir@/dummy-host2.example.com-error_log
##    CustomLog @rel_logfiledir@/dummy-host2.example.com-access_log common
##</VirtualHost>

<VirtualHost 127.0.0.1:80>
    ServerAdmin webmaster@localhost
    DocumentRoot "C:/xampp/htdocs/"
    ServerName localhost
   DirectoryIndex index.php index.html index.htm
</VirtualHost>

<VirtualHost 127.0.0.2:80>
    ServerAdmin webmaster@typo3.pc
    DocumentRoot "C:/xampp/htdocs/www_test/typo3.pc/"
    ServerName typo3.pc
    ServerAlias www.typo3.pc
##   DirectoryIndex index.html index.htm index.php
</VirtualHost>

<VirtualHost 127.0.0.11:80>
    ServerAdmin webmaster@css.pc
    DocumentRoot "C:/xampp/htdocs/www_test/css.pc/"
    ServerName css.pc
    ServerAlias www.css.pc   
   DirectoryIndex index.php index.html index.htm
</VirtualHost>


und

in hosts-Datei steht:
Code: Select all
127.0.0.1   localhost
127.0.0.2   typo3.pc
127.0.0.11   css.pc


Wolltest Du die Daten sehen?
Last edited by Byteman on 21. October 2007 00:59, edited 1 time in total.
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Wiedmann » 21. October 2007 00:56

Wolltest Du die Daten sehen?

Yup.

Erst noch 2 Fragen:
- Du benutzt den XAMPP also ausschliesslich local?
- hast du irgendwas an der "httpd.conf" geändert?
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby Byteman » 21. October 2007 01:06

Wiedmann wrote:- Du benutzt den XAMPP also ausschliesslich local?
- hast du irgendwas an der "httpd.conf" geändert?

Ja, ausschliesslich local. (Und ausserdem die Top Level Domain PC existiert in der Welt nicht, wenn Du das meinst?)
In der Datei httpd.conf nabe ich eventuell auch was geändert (nicht viel)
aber weiss nicht mehr genau was.
Entschuldigung, aber mir bleibt jetzt nur die ganze Inhalt der Datei hier zu posten:
Code: Select all
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/xampp/apache" will be interpreted by the
# server as "C:/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild  0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule autoindex_module modules/mod_autoindex.so # don't load because of mod_autoindex_color.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule ssl_module modules/mod_ssl.so

LoadModule autoindex_color_module modules/mod_autoindex_color.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_remote_module modules/mod_auth_remote.so
#LoadModule sspi_auth_module modules/mod_auth_sspi.so
#LoadModule log_sql_module modules/mod_log_sql.so
#LoadModule log_sql_mysql_module modules/mod_log_sql_mysql.so
#<IfModule ssl_module>
#    LoadModule log_sql_ssl_module modules/mod_log_sql_ssl.so
#</IfModule>
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule xmlns_module modules/mod_xmlns.so
#LoadModule proxy_xml_module modules/mod_proxy_xml.so
#LoadModule bw_module modules/mod_bw.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI
   
    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl index.html index.htm index.shtml index.phtml
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
    LogFormat "%h %l %u %t "%r" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access.log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access.log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"

</IfModule>

#
# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/xampp/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script.  For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:

   #!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file.  Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention.  The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
#

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi

    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis

    # For server-parsed imagemap files:
    #AddHandler imap-file map

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
   AddType text/html .shtml
   AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
EnableMMAP off
EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# XAMPP specific settings
Include conf/extra/httpd-xampp.conf

# Server-pool management (MPM specific)
# Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf

#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Byteman » 21. October 2007 01:15

Wiedmann wrote:- hast du irgendwas an der "httpd.conf" geändert?

So, ich hatte einen Backup der ursprunglicher httpd.conf.
Wiederherstellung der Datei in unsprunglichen Zustand, dann Apache Restart. Hat gar nichts gebracht - Problem besteht weiter.

Wo wird denn noch DirectoryIndex definiert?
Oder habe ich es falsch in der httpd-vhosts.conf defineirt?
Oder fehlt da was noch?
Oder wird die Anweisung irgendwo in einer anderer Datei überschrieben?
Wo denn kann es noch sein?
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Byteman » 21. October 2007 01:39

Hier was steht in der Datei error.log von Apache 2:
[Sun Oct 21 02:16:51 2007] [error] [client 127.0.0.11] Directory index forbidden by Options directive: C:/xampp/htdocs/www_test/css.pc/


Ich denke das bringt nichts?
Warum mit index.php alles läuft und mit index.html (gleicher rein HTML-Inhalt) nicht???
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Wiedmann » 21. October 2007 01:52

Oder habe ich es falsch in der httpd-vhosts.conf defineirt?

Im Prinzip ja. Die Datei ist so nicht korrekt.

Wo wird denn noch DirectoryIndex definiert?

Tatsächlich kannst du dir diese Zeile so oder so sparen, da dies ja die Standardeinstellung ist (aus der "httpd.conf"). Zumindest kommen diese 3 Dateien ja im "Standard" vor.

Oder wird die Anweisung irgendwo in einer anderer Datei überschrieben?

Theoretisch könnte es auch eine ".htaccess" im Verzeichnis "C:/xampp/htdocs/" oder "C:/xampp/htdocs/www_test/" sein.

Oder fehlt da was noch?

Yup. So sollte es aussehen:

httpd-vhosts.conf
Code: Select all
NameVirtualHost *:80

<VirtualHost *:80>
    ServerAdmin webmaster@localhost
    DocumentRoot "C:/xampp/htdocs"
    ServerName localhost
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@typo3.pc
    DocumentRoot "C:/xampp/htdocs/www_test/typo3.pc"
    ServerName typo3.pc
    ServerAlias www.typo3.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@typo3yaml.pc
    DocumentRoot "C:/xampp/htdocs/www_test/typo3yaml.pc"
    ServerName typo3yaml.pc
    ServerAlias www.typo3yaml.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@j15rc3.pc
    DocumentRoot "C:/xampp/htdocs/www_test/j15rc3.pc"
    ServerName j15rc3.pc
    ServerAlias www.j15rc3.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@hostcms.pc
    DocumentRoot "C:/xampp/htdocs/www_test/hostcms.pc"
    ServerName hostcms.pc
    ServerAlias www.hostcms.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@typo3utf8.pc
    DocumentRoot "C:/xampp/htdocs/www_test/typo3utf8.pc"
    ServerName typo3utf8.pc
    ServerAlias www.typo3utf8.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@drupal52.pc
    DocumentRoot "C:/xampp/htdocs/www_test/drupal52.pc"
    ServerName drupal52.pc
    ServerAlias www.drupal52.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@j15rc3ori.pc
    DocumentRoot "C:/xampp/htdocs/www_test/j15rc3ori.pc"
    ServerName j15rc3ori.pc
    ServerAlias www.j15rc3ori.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@oscommerce.pc
    DocumentRoot "C:/xampp/htdocs/www_test/oscommerce.pc"
    ServerName oscommerce.pc
    ServerAlias www.oscommerce.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@tierhilfe-moldawien.pc
    DocumentRoot "C:/xampp/htdocs/www_test/tierhilfe-moldawien.pc"
    ServerName tierhilfe-moldawien.pc
    ServerAlias www.tierhilfe-moldawien.pc
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@css.pc
    DocumentRoot "C:/xampp/htdocs/www_test/css.pc"
    ServerName css.pc
    ServerAlias www.css.pc   
</VirtualHost>


HOSTS
Code: Select all
127.0.0.1   localhost
127.0.0.1   typo3.pc www.typo3.pc
127.0.0.1   typo3yaml.pc www.typo3yaml.pc
127.0.0.1   j15rc3.pc www.j15rc3.pc
127.0.0.1   hostcms.pc www.hostcms.pc
127.0.0.1   typo3utf8.pc www.typo3utf8.pc
127.0.0.1   drupal52.pc www.drupal52.pc
127.0.0.1   j15rc3ori.pc www.j15rc3ori.pc
127.0.0.1   oscommerce.pc www.oscommerce.pc
127.0.0.1   tierhilfe-moldawien.pc www.tierhilfe-moldawien.pc
127.0.0.1   css.pc www.css.pc

Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby Byteman » 21. October 2007 13:55

Wiedmann wrote:Im Prinzip ja. Die Datei ist so nicht korrekt.


Aber das ist doch kein Problem in meinem Fall:
Die URLs werden JA gefunden! Also z. B. css.pc und alle andere lokale
Adressen werden richtig adressiert und die Seiten gezeigt.

Das Problem lautet ganz anders:
Warum nur index.php wird als eine Index-Datei seitens Apache (oder PHP?) anerkannt und die anderen (index.html etc.) nicht?


Obwohl ich habe alle drei in der Datei httpd-vhosts.conf unter

Code: Select all
DirectoryIndex index.php index.html index.htm


definiert.

Darf ich eigentlich parallel erstellen die gleiche Thema in einem englischen Forum-Teil, wenn ich schon sowie so auf englisch sie übersetzt habe? Eventuell bekomme ich auch da weitere Hilfe?
Byteman
 
Posts: 14
Joined: 20. October 2007 15:24

Postby Wiedmann » 21. October 2007 14:05

Hast du es jetzt einfach mal so übernommen wie von mir gepostet?
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Next

Return to XAMPP für Windows

Who is online

Users browsing this forum: No registered users and 17 guests