CPAN: DBD::MySQL Fehler

Irgendwelche Probleme mit XAMPP für Linux? Dann ist hier genau der richtige Ort um nachzufragen.

CPAN: DBD::MySQL Fehler

Postby darnouar » 01. July 2004 17:33

Hi,
ich hab mir CPAN raufgemacht und wollte DBD:mysql installieren, da ein Programm es nicht erkannnt hatte. (Ich hatte früher das installiert: http://community.apachefriends.org/f/viewtopic.php?t=4229)

Folgender Fehler kommt bei der DBD::mysql installation unter cpan:

Code: Select all
cpan> install DBD::mysql
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
  Database was generated on Thu, 01 Jul 2004 13:45:22 GMT
Running install for module DBD::mysql
Running make for R/RU/RUDY/DBD-mysql-2.9003.tar.gz
CPAN: Digest::MD5 loaded ok
Checksum for /root/.cpan/sources/authors/id/R/RU/RUDY/DBD-mysql-2.9003.tar.gz ok
Scanning cache /root/.cpan/build for sizes
DBD-mysql-2.9003/
DBD-mysql-2.9003/t/
DBD-mysql-2.9003/t/mysql2.t
DBD-mysql-2.9003/t/akmisc.t
DBD-mysql-2.9003/t/60leaks.t
DBD-mysql-2.9003/t/10dsnlist.t
DBD-mysql-2.9003/t/ak-dbd.t
DBD-mysql-2.9003/t/50chopblanks.t
DBD-mysql-2.9003/t/mysql.t
DBD-mysql-2.9003/t/lib.pl
DBD-mysql-2.9003/t/40blobs.t
DBD-mysql-2.9003/t/40nulls.t
DBD-mysql-2.9003/t/insertid.t
DBD-mysql-2.9003/t/40listfields.t
DBD-mysql-2.9003/t/40bindparam.t
DBD-mysql-2.9003/t/mysql.dbtest
DBD-mysql-2.9003/t/dbdadmin.t
DBD-mysql-2.9003/t/20createdrop.t
DBD-mysql-2.9003/t/00base.t
DBD-mysql-2.9003/t/30insertfetch.t
DBD-mysql-2.9003/t/40numrows.t
DBD-mysql-2.9003/t/50commit.t
DBD-mysql-2.9003/t/mysql.mtest
DBD-mysql-2.9003/MANIFEST
DBD-mysql-2.9003/myld
DBD-mysql-2.9003/dbdimp.c
DBD-mysql-2.9003/lib/
DBD-mysql-2.9003/lib/DBD/
DBD-mysql-2.9003/lib/DBD/mysql/
DBD-mysql-2.9003/lib/DBD/mysql/GetInfo.pm
DBD-mysql-2.9003/lib/DBD/mysql/INSTALL.pod
DBD-mysql-2.9003/lib/DBD/mysql.pm
DBD-mysql-2.9003/lib/Mysql/
DBD-mysql-2.9003/lib/Mysql/Statement.pm
DBD-mysql-2.9003/lib/Bundle/
DBD-mysql-2.9003/lib/Bundle/DBD/
DBD-mysql-2.9003/lib/Bundle/DBD/mysql.pm
DBD-mysql-2.9003/lib/Mysql.pm
DBD-mysql-2.9003/dbdimp.h
DBD-mysql-2.9003/mysql.xs
DBD-mysql-2.9003/MANIFEST.SKIP
DBD-mysql-2.9003/README
DBD-mysql-2.9003/INSTALL.html
DBD-mysql-2.9003/Makefile.PL
DBD-mysql-2.9003/ChangeLog
DBD-mysql-2.9003/constants.h
DBD-mysql-2.9003/TODO
Removing previously used /root/.cpan/build/DBD-mysql-2.9003

  CPAN.pm: Going to build R/RU/RUDY/DBD-mysql-2.9003.tar.gz

Can't exec "mysql_config": Datei oder Verzeichnis nicht gefunden at Makefile.PL line 174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": Datei oder Verzeichnis nicht gefunden at Makefile.PL line 174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": Datei oder Verzeichnis nicht gefunden at Makefile.PL line 174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": Datei oder Verzeichnis nicht gefunden at Makefile.PL line 174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Can't exec "mysql_config": Datei oder Verzeichnis nicht gefunden at Makefile.PL line 174.
readline() on closed filehandle PIPE at Makefile.PL line 176.
Failed to determine directory of mysql.h. Use

  perl Makefile.PL --cflags=-I<dir>

to set this directory. For details see the INSTALL.html file,
section "C Compiler flags" or type

  perl Makefile.PL --help
Running make test
  Make had some problems, maybe interrupted? Won't test
Running make install
  Make had some problems, maybe interrupted? Won't install

cpan>
darnouar
 
Posts: 11
Joined: 26. October 2003 18:51

Postby daxim » 02. July 2004 23:47

Installiere die Headerdateien für MySQL. Ich kenne dein Linux nicht. Falls du einen Paketmanager benutzt, halte Ausschau nach mysql-dev o.ä. Namen.

Installiere über CPAN das Modul Bundle::DBD::mysql, dann werden auch die Abhängigkeiten gleich mit aufgelöst.
daxim
 
Posts: 53
Joined: 04. June 2004 20:45

Postby darnouar » 03. July 2004 10:05

Habe SuSE Linux 9.0 Pro. Ich hab von der CD das Paket mysql-devel installiert, da stand in der Beschreibung auch irgendwas von den MySQL Headerdateien. Wenn ich mit Cpan das Bundle DBD MySQL installiere kommt:

Code: Select all
cpan> install Bundle::DBD::mysql
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
  Database was generated on Thu, 01 Jul 2004 13:45:22 GMT
LWP not available
CPAN: Net::FTP loaded ok
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/01mailrc.txt.gz
Going to read /root/.cpan/sources/authors/01mailrc.txt.gz
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/modules/02packages.details.txt.gz
Going to read /root/.cpan/sources/modules/02packages.details.txt.gz
  Database was generated on Sat, 03 Jul 2004 07:10:56 GMT
  HTTP::Date not available
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/modules/03modlist.data.gz
Going to read /root/.cpan/sources/modules/03modlist.data.gz
Going to write /root/.cpan/Metadata
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/id/J/JW/JWIED/Msql-Mysql-modules-1.2219.tar.gz
CPAN: Digest::MD5 loaded ok
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/id/J/JW/JWIED/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/J/JW/JWIED/Msql-Mysql-modules-1.2219.tar.gz ok
Scanning cache /root/.cpan/build for sizes
Msql-Mysql-modules-1.2219/
Msql-Mysql-modules-1.2219/dbd/
Msql-Mysql-modules-1.2219/dbd/constants.h
Msql-Mysql-modules-1.2219/dbd/dbd.xs.in
Msql-Mysql-modules-1.2219/dbd/dbimon.in
Msql-Mysql-modules-1.2219/dbd/Acknowledgements
Msql-Mysql-modules-1.2219/dbd/myMsql.h
Msql-Mysql-modules-1.2219/dbd/Changes
Msql-Mysql-modules-1.2219/dbd/bindparam.h
Msql-Mysql-modules-1.2219/dbd/dbd.pm.in
Msql-Mysql-modules-1.2219/dbd/Makefile.PL.in
Msql-Mysql-modules-1.2219/dbd/dbdimp.c
Msql-Mysql-modules-1.2219/dbd/dbdimp.h
Msql-Mysql-modules-1.2219/dbd/bundle.pm.in
Msql-Mysql-modules-1.2219/lib/
Msql-Mysql-modules-1.2219/lib/ExtUtils/
Msql-Mysql-modules-1.2219/lib/ExtUtils/PerlPP.pm
Msql-Mysql-modules-1.2219/lib/DBD/
Msql-Mysql-modules-1.2219/lib/DBD/mSQL/
Msql-Mysql-modules-1.2219/lib/DBD/mSQL/Install.pm
Msql-Mysql-modules-1.2219/lib/DBD/mSQL1/
Msql-Mysql-modules-1.2219/lib/DBD/mSQL1/Install.pm
Msql-Mysql-modules-1.2219/lib/DBD/mysql/
Msql-Mysql-modules-1.2219/lib/DBD/mysql/Install.pm
Msql-Mysql-modules-1.2219/tests/
Msql-Mysql-modules-1.2219/tests/ak-dbd.t
Msql-Mysql-modules-1.2219/tests/mSQL1.dbtest
Msql-Mysql-modules-1.2219/tests/CSV.mtest
Msql-Mysql-modules-1.2219/tests/CSV.dbtest
Msql-Mysql-modules-1.2219/tests/20createdrop.t
Msql-Mysql-modules-1.2219/tests/dbdadmin.t
Msql-Mysql-modules-1.2219/tests/50commit.t
Msql-Mysql-modules-1.2219/tests/msql2.t
Msql-Mysql-modules-1.2219/tests/mysql.dbtest
Msql-Mysql-modules-1.2219/tests/50chopblanks.t
Msql-Mysql-modules-1.2219/tests/00base.t
Msql-Mysql-modules-1.2219/tests/40nulls.t
Msql-Mysql-modules-1.2219/tests/msql1.t
Msql-Mysql-modules-1.2219/tests/pNET.dbtest
Msql-Mysql-modules-1.2219/tests/mysql2.t
Msql-Mysql-modules-1.2219/tests/40bindparam.t
Msql-Mysql-modules-1.2219/tests/10dsnlist.t
Msql-Mysql-modules-1.2219/tests/mSQL.mtest
Msql-Mysql-modules-1.2219/tests/mysql.t
Msql-Mysql-modules-1.2219/tests/README
Msql-Mysql-modules-1.2219/tests/60leaks.t
Msql-Mysql-modules-1.2219/tests/mSQL1.mtest
Msql-Mysql-modules-1.2219/tests/30insertfetch.t
Msql-Mysql-modules-1.2219/tests/Adabas.mtest
Msql-Mysql-modules-1.2219/tests/40blobs.t
Msql-Mysql-modules-1.2219/tests/40numrows.t
Msql-Mysql-modules-1.2219/tests/lib.pl
Msql-Mysql-modules-1.2219/tests/pNET.mtest
Msql-Mysql-modules-1.2219/tests/40listfields.t
Msql-Mysql-modules-1.2219/tests/skeleton.test
Msql-Mysql-modules-1.2219/tests/mysql.mtest
Msql-Mysql-modules-1.2219/tests/mSQL.dbtest
Msql-Mysql-modules-1.2219/tests/Adabas.dbtest
Msql-Mysql-modules-1.2219/tests/akmisc.t
Msql-Mysql-modules-1.2219/mSQL/
Msql-Mysql-modules-1.2219/mSQL/lib/
Msql-Mysql-modules-1.2219/mSQL/lib/Bundle/
Msql-Mysql-modules-1.2219/mSQL/lib/Bundle/DBD/
Msql-Mysql-modules-1.2219/mSQL/lib/Bundle/DBD/mSQL.pm
Msql-Mysql-modules-1.2219/mSQL/lib/DBD/
Msql-Mysql-modules-1.2219/mSQL/lib/DBD/mSQL.pm
Msql-Mysql-modules-1.2219/mSQL/lib/Msql.pm
Msql-Mysql-modules-1.2219/mSQL/lib/Msql/
Msql-Mysql-modules-1.2219/mSQL/lib/Msql/Statement.pm
Msql-Mysql-modules-1.2219/nodbd/
Msql-Mysql-modules-1.2219/nodbd/nodbd.pm.in
Msql-Mysql-modules-1.2219/nodbd/pmsql.in
Msql-Mysql-modules-1.2219/nodbd/statement.pm.in
Msql-Mysql-modules-1.2219/nodbd/typemap
Msql-Mysql-modules-1.2219/mysql/
Msql-Mysql-modules-1.2219/mysql/lib/
Msql-Mysql-modules-1.2219/mysql/lib/Mysql.pm
Msql-Mysql-modules-1.2219/mysql/lib/Mysql/
Msql-Mysql-modules-1.2219/mysql/lib/Mysql/Statement.pm
Msql-Mysql-modules-1.2219/mysql/lib/DBD/
Msql-Mysql-modules-1.2219/mysql/lib/DBD/mysql.pm
Msql-Mysql-modules-1.2219/mysql/lib/Bundle/
Msql-Mysql-modules-1.2219/mysql/lib/Bundle/DBD/
Msql-Mysql-modules-1.2219/mysql/lib/Bundle/DBD/mysql.pm
Msql-Mysql-modules-1.2219/Makefile.PL
Msql-Mysql-modules-1.2219/MANIFEST
Msql-Mysql-modules-1.2219/MANIFEST.SKIP
Msql-Mysql-modules-1.2219/README
Msql-Mysql-modules-1.2219/ChangeLog
DBI is up to date.
Running install for module Data::ShowTable
Running make for A/AK/AKSTE/Data-ShowTable-3.3.tar.gz
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/id/A/AK/AKSTE/Data-ShowTable-3.3.tar.gz
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/id/A/AK/AKSTE/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/A/AK/AKSTE/Data-ShowTable-3.3.tar.gz ok
Data-ShowTable-3.3/
Data-ShowTable-3.3/CVS/
Data-ShowTable-3.3/CVS/Entries
Data-ShowTable-3.3/CVS/Repository
Data-ShowTable-3.3/Changes
Data-ShowTable-3.3/Copyright
Data-ShowTable-3.3/Data-ShowTable-2.2.html
Data-ShowTable-3.3/Data-ShowTable-2.3.html
Data-ShowTable-3.3/Data-ShowTable-3.1.html
Data-ShowTable-3.3/Data-ShowTable-3.3.html
Data-ShowTable-3.3/GNU-LICENSE
Data-ShowTable-3.3/MANIFEST
Data-ShowTable-3.3/Makefile.PL
Data-ShowTable-3.3/README
Data-ShowTable-3.3/ShowTable.pm
Data-ShowTable-3.3/gen-html
Data-ShowTable-3.3/gen-tests
Data-ShowTable-3.3/showtable
Data-ShowTable-3.3/showtable-3.1.html
Data-ShowTable-3.3/showtable-3.3.html
Data-ShowTable-3.3/t/
Data-ShowTable-3.3/t/CVS/
Data-ShowTable-3.3/t/CVS/Entries
Data-ShowTable-3.3/t/CVS/Repository
Data-ShowTable-3.3/t/OBJ-TEST.pl
Data-ShowTable-3.3/t/Test-Setup.pl
Data-ShowTable-3.3/t/box-calls.t
Data-ShowTable-3.3/t/box-scaling.t
Data-ShowTable-3.3/t/box-widths.t
Data-ShowTable-3.3/t/box-wrap.t
Data-ShowTable-3.3/t/calls.pl
Data-ShowTable-3.3/t/html-calls.t
Data-ShowTable-3.3/t/html-fmt.t
Data-ShowTable-3.3/t/html-scaling.t
Data-ShowTable-3.3/t/html-widths.t
Data-ShowTable-3.3/t/html-wrap.t
Data-ShowTable-3.3/t/list-calls.t
Data-ShowTable-3.3/t/list-scaling.t
Data-ShowTable-3.3/t/list-widths.t
Data-ShowTable-3.3/t/list-wrap.t
Data-ShowTable-3.3/t/out/
Data-ShowTable-3.3/t/out/CVS/
Data-ShowTable-3.3/t/out/CVS/Entries
Data-ShowTable-3.3/t/out/CVS/Repository
Data-ShowTable-3.3/t/out/box-calls.t-1.ref
Data-ShowTable-3.3/t/out/box-calls.t-2.ref
Data-ShowTable-3.3/t/out/box-calls.t-3.ref
Data-ShowTable-3.3/t/out/box-calls.t-4.ref
Data-ShowTable-3.3/t/out/box-calls.t-5.ref
Data-ShowTable-3.3/t/out/box-calls.t-6.ref
Data-ShowTable-3.3/t/out/box-calls.t-7.ref
Data-ShowTable-3.3/t/out/box-calls.t-8.ref
Data-ShowTable-3.3/t/out/box-scaling.t-1.ref
Data-ShowTable-3.3/t/out/box-scaling.t-2.ref
Data-ShowTable-3.3/t/out/box-scaling.t-3.ref
Data-ShowTable-3.3/t/out/box-scaling.t-4.ref
Data-ShowTable-3.3/t/out/box-scaling.t-5.ref
Data-ShowTable-3.3/t/out/box-scaling.t-6.ref
Data-ShowTable-3.3/t/out/box-scaling.t-7.ref
Data-ShowTable-3.3/t/out/box-scaling.t-8.ref
Data-ShowTable-3.3/t/out/box-widths.t-1.ref
Data-ShowTable-3.3/t/out/box-widths.t-2.ref
Data-ShowTable-3.3/t/out/box-widths.t-3.ref
Data-ShowTable-3.3/t/out/box-widths.t-4.ref
Data-ShowTable-3.3/t/out/box-widths.t-5.ref
Data-ShowTable-3.3/t/out/box-widths.t-6.ref
Data-ShowTable-3.3/t/out/box-widths.t-7.ref
Data-ShowTable-3.3/t/out/box-widths.t-8.ref
Data-ShowTable-3.3/t/out/box-wrap.t-1.ref
Data-ShowTable-3.3/t/out/box-wrap.t-2.ref
Data-ShowTable-3.3/t/out/box-wrap.t-3.ref
Data-ShowTable-3.3/t/out/box-wrap.t-4.ref
Data-ShowTable-3.3/t/out/box-wrap.t-5.ref
Data-ShowTable-3.3/t/out/html-calls.t-1.ref
Data-ShowTable-3.3/t/out/html-calls.t-2.ref
Data-ShowTable-3.3/t/out/html-calls.t-3.ref
Data-ShowTable-3.3/t/out/html-calls.t-4.ref
Data-ShowTable-3.3/t/out/html-calls.t-5.ref
Data-ShowTable-3.3/t/out/html-calls.t-6.ref
Data-ShowTable-3.3/t/out/html-calls.t-7.ref
Data-ShowTable-3.3/t/out/html-calls.t-8.ref
Data-ShowTable-3.3/t/out/html-fmt.t-1.ref
Data-ShowTable-3.3/t/out/html-fmt.t-10.ref
Data-ShowTable-3.3/t/out/html-fmt.t-11.ref
Data-ShowTable-3.3/t/out/html-fmt.t-12.ref
Data-ShowTable-3.3/t/out/html-fmt.t-2.ref
Data-ShowTable-3.3/t/out/html-fmt.t-3.ref
Data-ShowTable-3.3/t/out/html-fmt.t-4.ref
Data-ShowTable-3.3/t/out/html-fmt.t-5.ref
Data-ShowTable-3.3/t/out/html-fmt.t-6.ref
Data-ShowTable-3.3/t/out/html-fmt.t-7.ref
Data-ShowTable-3.3/t/out/html-fmt.t-8.ref
Data-ShowTable-3.3/t/out/html-fmt.t-9.ref
Data-ShowTable-3.3/t/out/html-scaling.t-1.ref
Data-ShowTable-3.3/t/out/html-scaling.t-2.ref
Data-ShowTable-3.3/t/out/html-scaling.t-3.ref
Data-ShowTable-3.3/t/out/html-scaling.t-4.ref
Data-ShowTable-3.3/t/out/html-scaling.t-5.ref
Data-ShowTable-3.3/t/out/html-scaling.t-6.ref
Data-ShowTable-3.3/t/out/html-scaling.t-7.ref
Data-ShowTable-3.3/t/out/html-scaling.t-8.ref
Data-ShowTable-3.3/t/out/html-widths.t-1.ref
Data-ShowTable-3.3/t/out/html-widths.t-2.ref
Data-ShowTable-3.3/t/out/html-widths.t-3.ref
Data-ShowTable-3.3/t/out/html-widths.t-4.ref
Data-ShowTable-3.3/t/out/html-widths.t-5.ref
Data-ShowTable-3.3/t/out/html-widths.t-6.ref
Data-ShowTable-3.3/t/out/html-widths.t-7.ref
Data-ShowTable-3.3/t/out/html-widths.t-8.ref
Data-ShowTable-3.3/t/out/html-wrap.t-1.ref
Data-ShowTable-3.3/t/out/html-wrap.t-2.ref
Data-ShowTable-3.3/t/out/html-wrap.t-3.ref
Data-ShowTable-3.3/t/out/html-wrap.t-4.ref
Data-ShowTable-3.3/t/out/html-wrap.t-5.ref
Data-ShowTable-3.3/t/out/list-calls.t-1.ref
Data-ShowTable-3.3/t/out/list-calls.t-2.ref
Data-ShowTable-3.3/t/out/list-calls.t-3.ref
Data-ShowTable-3.3/t/out/list-calls.t-4.ref
Data-ShowTable-3.3/t/out/list-calls.t-5.ref
Data-ShowTable-3.3/t/out/list-calls.t-6.ref
Data-ShowTable-3.3/t/out/list-calls.t-7.ref
Data-ShowTable-3.3/t/out/list-calls.t-8.ref
Data-ShowTable-3.3/t/out/list-scaling.t-1.ref
Data-ShowTable-3.3/t/out/list-scaling.t-2.ref
Data-ShowTable-3.3/t/out/list-scaling.t-3.ref
Data-ShowTable-3.3/t/out/list-scaling.t-4.ref
Data-ShowTable-3.3/t/out/list-scaling.t-5.ref
Data-ShowTable-3.3/t/out/list-scaling.t-6.ref
Data-ShowTable-3.3/t/out/list-scaling.t-7.ref
Data-ShowTable-3.3/t/out/list-scaling.t-8.ref
Data-ShowTable-3.3/t/out/list-widths.t-1.ref
Data-ShowTable-3.3/t/out/list-widths.t-2.ref
Data-ShowTable-3.3/t/out/list-widths.t-3.ref
Data-ShowTable-3.3/t/out/list-widths.t-4.ref
Data-ShowTable-3.3/t/out/list-widths.t-5.ref
Data-ShowTable-3.3/t/out/list-widths.t-6.ref
Data-ShowTable-3.3/t/out/list-widths.t-7.ref
Data-ShowTable-3.3/t/out/list-widths.t-8.ref
Data-ShowTable-3.3/t/out/list-wrap.t-1.ref
Data-ShowTable-3.3/t/out/list-wrap.t-2.ref
Data-ShowTable-3.3/t/out/list-wrap.t-3.ref
Data-ShowTable-3.3/t/out/list-wrap.t-4.ref
Data-ShowTable-3.3/t/out/list-wrap.t-5.ref
Data-ShowTable-3.3/t/out/simple-calls.t-1.ref
Data-ShowTable-3.3/t/out/simple-calls.t-2.ref
Data-ShowTable-3.3/t/out/simple-calls.t-3.ref
Data-ShowTable-3.3/t/out/simple-calls.t-4.ref
Data-ShowTable-3.3/t/out/simple-calls.t-5.ref
Data-ShowTable-3.3/t/out/simple-calls.t-6.ref
Data-ShowTable-3.3/t/out/simple-calls.t-7.ref
Data-ShowTable-3.3/t/out/simple-calls.t-8.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-1.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-2.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-3.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-4.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-5.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-6.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-7.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-8.ref
Data-ShowTable-3.3/t/out/simple-widths.t-1.ref
Data-ShowTable-3.3/t/out/simple-widths.t-2.ref
Data-ShowTable-3.3/t/out/simple-widths.t-3.ref
Data-ShowTable-3.3/t/out/simple-widths.t-4.ref
Data-ShowTable-3.3/t/out/simple-widths.t-5.ref
Data-ShowTable-3.3/t/out/simple-widths.t-6.ref
Data-ShowTable-3.3/t/out/simple-widths.t-7.ref
Data-ShowTable-3.3/t/out/simple-widths.t-8.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-1.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-2.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-3.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-4.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-5.ref
Data-ShowTable-3.3/t/scaling.pl
Data-ShowTable-3.3/t/showtable.pl
Data-ShowTable-3.3/t/simple-calls.t
Data-ShowTable-3.3/t/simple-scaling.t
Data-ShowTable-3.3/t/simple-widths.t
Data-ShowTable-3.3/t/simple-wrap.t
Data-ShowTable-3.3/t/testfile
Data-ShowTable-3.3/t/widths.pl
Data-ShowTable-3.3/t/wrap.pl
Data-ShowTable-3.3/test.pl.off
Data-ShowTable-3.3/testfile.lst
Data-ShowTable-3.3/testfile.tabs
Data-ShowTable-3.3/update-public

  CPAN.pm: Going to build A/AK/AKSTE/Data-ShowTable-3.3.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for Data::ShowTable
cp ShowTable.pm blib/lib/Data/ShowTable.pm
cp showtable blib/script/showtable
/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/showtable
Manifying blib/man1/showtable.1
Manifying blib/man3/Data::ShowTable.3pm
*** ERROR: unterminated I<...> at line 724 in file ShowTable.pm
*** ERROR: unterminated I<...> at line 724 in file ShowTable.pm
  /usr/bin/make  -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/box-calls.........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/box-calls.........ok
t/box-scaling.......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/box-scaling.......ok
t/box-widths........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/box-widths........ok
t/box-wrap..........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/box-wrap..........ok
t/html-calls........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-calls........ok
t/html-fmt..........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-fmt..........ok
t/html-scaling......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-scaling......ok
t/html-widths.......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-widths.......ok
t/html-wrap.........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-wrap.........ok
t/list-calls........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/list-calls........ok
t/list-scaling......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/list-scaling......ok
t/list-widths.......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/list-widths.......ok
t/list-wrap.........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/list-wrap.........ok
t/simple-calls......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/simple-calls......ok
t/simple-scaling....Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/simple-scaling....ok
t/simple-widths.....Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/simple-widths.....ok
t/simple-wrap.......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/simple-wrap.......ok
All tests successful.
Files=17, Tests=128,  1 wallclock secs ( 0.95 cusr +  0.53 csys =  1.48 CPU)
  /usr/bin/make test -- OK
Running make install
Installing /usr/lib/perl5/site_perl/5.8.1/Data/ShowTable.pm
Installing /usr/share/man/man1/showtable.1
Installing /usr/share/man/man3/Data::ShowTable.3pm
Installing /usr/bin/showtable
Writing /usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/Data/ShowTable/.packlist
Appending installation info to /usr/lib/perl5/5.8.1/i586-linux-thread-multi/perllocal.pod
  /usr/bin/make install  -- OK
Running install for module Mysql
Running make for R/RU/RUDY/DBD-mysql-2.9003.tar.gz
Checksum for /root/.cpan/sources/authors/id/R/RU/RUDY/DBD-mysql-2.9003.tar.gz ok
DBD-mysql-2.9003/
DBD-mysql-2.9003/t/
DBD-mysql-2.9003/t/mysql2.t
DBD-mysql-2.9003/t/akmisc.t
DBD-mysql-2.9003/t/60leaks.t
DBD-mysql-2.9003/t/10dsnlist.t
DBD-mysql-2.9003/t/ak-dbd.t
DBD-mysql-2.9003/t/50chopblanks.t
DBD-mysql-2.9003/t/mysql.t
DBD-mysql-2.9003/t/lib.pl
DBD-mysql-2.9003/t/40blobs.t
DBD-mysql-2.9003/t/40nulls.t
DBD-mysql-2.9003/t/insertid.t
DBD-mysql-2.9003/t/40listfields.t
DBD-mysql-2.9003/t/40bindparam.t
DBD-mysql-2.9003/t/mysql.dbtest
DBD-mysql-2.9003/t/dbdadmin.t
DBD-mysql-2.9003/t/20createdrop.t
DBD-mysql-2.9003/t/00base.t
DBD-mysql-2.9003/t/30insertfetch.t
DBD-mysql-2.9003/t/40numrows.t
DBD-mysql-2.9003/t/50commit.t
DBD-mysql-2.9003/t/mysql.mtest
DBD-mysql-2.9003/MANIFEST
DBD-mysql-2.9003/myld
DBD-mysql-2.9003/dbdimp.c
DBD-mysql-2.9003/lib/
DBD-mysql-2.9003/lib/DBD/
DBD-mysql-2.9003/lib/DBD/mysql/
DBD-mysql-2.9003/lib/DBD/mysql/GetInfo.pm
DBD-mysql-2.9003/lib/DBD/mysql/INSTALL.pod
DBD-mysql-2.9003/lib/DBD/mysql.pm
DBD-mysql-2.9003/lib/Mysql/
DBD-mysql-2.9003/lib/Mysql/Statement.pm
DBD-mysql-2.9003/lib/Bundle/
DBD-mysql-2.9003/lib/Bundle/DBD/
DBD-mysql-2.9003/lib/Bundle/DBD/mysql.pm
DBD-mysql-2.9003/lib/Mysql.pm
DBD-mysql-2.9003/dbdimp.h
DBD-mysql-2.9003/mysql.xs
DBD-mysql-2.9003/MANIFEST.SKIP
DBD-mysql-2.9003/README
DBD-mysql-2.9003/INSTALL.html
DBD-mysql-2.9003/Makefile.PL
DBD-mysql-2.9003/ChangeLog
DBD-mysql-2.9003/constants.h
DBD-mysql-2.9003/TODO
Removing previously used /root/.cpan/build/DBD-mysql-2.9003

  CPAN.pm: Going to build R/RU/RUDY/DBD-mysql-2.9003.tar.gz

I will use the following settings for compiling and testing:

  cflags        (mysql_config) = -I'/usr/include/mysql'
  libs          (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm
  nocatchstderr (default     ) = 0
  nofoundrows   (default     ) = 0
  ssl           (guessed     ) = 0
  testdb        (default     ) = test
  testhost      (default     ) =
  testpassword  (default     ) =
  testuser      (default     ) =

To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.

Checking if your kit is complete...
Looks good
Using DBI 1.42 (for perl 5.008001 on i586-linux-thread-multi) installed in /usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/DBI
Writing Makefile for DBD::mysql
cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
cp lib/Mysql.pm blib/lib/Mysql.pm
cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
cc -c  -I/usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/DBI -I'/usr/include/mysql' -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -march=i586 -mcpu=i686 -fmessage-length=0 -Wall -pipe   -DVERSION=\"2.9003\" -DXS_VERSION=\"2.9003\" -fPIC "-I/usr/lib/perl5/5.8.1/i586-linux-thread-multi/CORE"   dbdimp.c
dbdimp.c: In function `CountParam':
dbdimp.c:61: Warnung: suggest parentheses around assignment used as truth value
dbdimp.c: In function `ParseParam':
dbdimp.c:239: Warnung: label `Default' defined but not used
/usr/bin/perl -p -e "s/~DRIVER~/mysql/g" /usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/DBI/Driver.xst > mysql.xsi
/usr/bin/perl /usr/lib/perl5/5.8.1/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.8.1/ExtUtils/typemap  mysql.xs > mysql.xsc && mv mysql.xsc mysql.c
Warning: duplicate function definition 'do' detected in mysql.xs, line 192
Warning: duplicate function definition 'rows' detected in mysql.xs, line 290
cc -c  -I/usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/DBI -I'/usr/include/mysql' -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -march=i586 -mcpu=i686 -fmessage-length=0 -Wall -pipe   -DVERSION=\"2.9003\" -DXS_VERSION=\"2.9003\" -fPIC "-I/usr/lib/perl5/5.8.1/i586-linux-thread-multi/CORE"   mysql.c
mysql.xs: In function `XS_DBD__mysql__GetInfo_dbd_mysql_get_info':
mysql.xs:351: Warnung: implicit declaration of function `is_prefix'
mysql.xs:324: Warnung: `retsv' might be used uninitialized in this function
Running Mkbootstrap for DBD::mysql ()
chmod 644 mysql.bs
rm -f blib/arch/auto/DBD/mysql/mysql.so
LD_RUN_PATH="/usr/lib/mysql:/lib" /usr/bin/perl myld cc  -shared dbdimp.o mysql.o  -o blib/arch/auto/DBD/mysql/mysql.so   -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm
/usr/lib/gcc-lib/i586-suse-linux/3.3.1/../../../../i586-suse-linux/bin/ld: cannot find -lz
collect2: ld returned 1 exit status


An error occurred while linking the DBD::mysql driver. The error
message seems to indicate that you don't have a libz.a,
or a libz.so. This is typically resolved by:

1.) You may try to remove the -lz or -lgz flag from the libs list
    by using the --libs switch for "perl Makefile.PL".
2.) On Red Hat Linux install libz-devel
3.) On other systems, please contact the mailing list

     Msql-Mysql-modules@lists.mysql.com

For further hints, see INSTALL.html, section Linker flags.
make: *** [blib/arch/auto/DBD/mysql/mysql.so] Fehler 1
  /usr/bin/make  -- NOT OK
Running make test
  Can't test without successful make
Running make install
  make had returned bad status, install seems impossible
Running install for module DBD::mysql
Running make for R/RU/RUDY/DBD-mysql-2.9003.tar.gz
  Is already unwrapped into directory /root/.cpan/build/DBD-mysql-2.9003
  Has already been processed within this session
Running make test
  Can't test without successful make
Running make install
  make had returned bad status, install seems impossible
Bundle summary: The following items in bundle Bundle::DBD::mysql had
installation problems:
  Mysql DBD::mysql

cpan>



[EDIT]
Wenn ich erneut folgende Befehle ausführe kommt das:

Code: Select all
cpan> install Bundle::DBD::mysql
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
  Database was generated on Thu, 01 Jul 2004 13:45:22 GMT
LWP not available
CPAN: Net::FTP loaded ok
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/01mailrc.txt.gz
Going to read /root/.cpan/sources/authors/01mailrc.txt.gz
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/modules/02packages.details.txt.gz
Going to read /root/.cpan/sources/modules/02packages.details.txt.gz
  Database was generated on Sat, 03 Jul 2004 07:10:56 GMT
  HTTP::Date not available
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/modules/03modlist.data.gz
Going to read /root/.cpan/sources/modules/03modlist.data.gz
Going to write /root/.cpan/Metadata
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/id/J/JW/JWIED/Msql-Mysql-modules-1.2219.tar.gz
CPAN: Digest::MD5 loaded ok
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/id/J/JW/JWIED/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/J/JW/JWIED/Msql-Mysql-modules-1.2219.tar.gz ok
Scanning cache /root/.cpan/build for sizes
Msql-Mysql-modules-1.2219/
Msql-Mysql-modules-1.2219/dbd/
Msql-Mysql-modules-1.2219/dbd/constants.h
Msql-Mysql-modules-1.2219/dbd/dbd.xs.in
Msql-Mysql-modules-1.2219/dbd/dbimon.in
Msql-Mysql-modules-1.2219/dbd/Acknowledgements
Msql-Mysql-modules-1.2219/dbd/myMsql.h
Msql-Mysql-modules-1.2219/dbd/Changes
Msql-Mysql-modules-1.2219/dbd/bindparam.h
Msql-Mysql-modules-1.2219/dbd/dbd.pm.in
Msql-Mysql-modules-1.2219/dbd/Makefile.PL.in
Msql-Mysql-modules-1.2219/dbd/dbdimp.c
Msql-Mysql-modules-1.2219/dbd/dbdimp.h
Msql-Mysql-modules-1.2219/dbd/bundle.pm.in
Msql-Mysql-modules-1.2219/lib/
Msql-Mysql-modules-1.2219/lib/ExtUtils/
Msql-Mysql-modules-1.2219/lib/ExtUtils/PerlPP.pm
Msql-Mysql-modules-1.2219/lib/DBD/
Msql-Mysql-modules-1.2219/lib/DBD/mSQL/
Msql-Mysql-modules-1.2219/lib/DBD/mSQL/Install.pm
Msql-Mysql-modules-1.2219/lib/DBD/mSQL1/
Msql-Mysql-modules-1.2219/lib/DBD/mSQL1/Install.pm
Msql-Mysql-modules-1.2219/lib/DBD/mysql/
Msql-Mysql-modules-1.2219/lib/DBD/mysql/Install.pm
Msql-Mysql-modules-1.2219/tests/
Msql-Mysql-modules-1.2219/tests/ak-dbd.t
Msql-Mysql-modules-1.2219/tests/mSQL1.dbtest
Msql-Mysql-modules-1.2219/tests/CSV.mtest
Msql-Mysql-modules-1.2219/tests/CSV.dbtest
Msql-Mysql-modules-1.2219/tests/20createdrop.t
Msql-Mysql-modules-1.2219/tests/dbdadmin.t
Msql-Mysql-modules-1.2219/tests/50commit.t
Msql-Mysql-modules-1.2219/tests/msql2.t
Msql-Mysql-modules-1.2219/tests/mysql.dbtest
Msql-Mysql-modules-1.2219/tests/50chopblanks.t
Msql-Mysql-modules-1.2219/tests/00base.t
Msql-Mysql-modules-1.2219/tests/40nulls.t
Msql-Mysql-modules-1.2219/tests/msql1.t
Msql-Mysql-modules-1.2219/tests/pNET.dbtest
Msql-Mysql-modules-1.2219/tests/mysql2.t
Msql-Mysql-modules-1.2219/tests/40bindparam.t
Msql-Mysql-modules-1.2219/tests/10dsnlist.t
Msql-Mysql-modules-1.2219/tests/mSQL.mtest
Msql-Mysql-modules-1.2219/tests/mysql.t
Msql-Mysql-modules-1.2219/tests/README
Msql-Mysql-modules-1.2219/tests/60leaks.t
Msql-Mysql-modules-1.2219/tests/mSQL1.mtest
Msql-Mysql-modules-1.2219/tests/30insertfetch.t
Msql-Mysql-modules-1.2219/tests/Adabas.mtest
Msql-Mysql-modules-1.2219/tests/40blobs.t
Msql-Mysql-modules-1.2219/tests/40numrows.t
Msql-Mysql-modules-1.2219/tests/lib.pl
Msql-Mysql-modules-1.2219/tests/pNET.mtest
Msql-Mysql-modules-1.2219/tests/40listfields.t
Msql-Mysql-modules-1.2219/tests/skeleton.test
Msql-Mysql-modules-1.2219/tests/mysql.mtest
Msql-Mysql-modules-1.2219/tests/mSQL.dbtest
Msql-Mysql-modules-1.2219/tests/Adabas.dbtest
Msql-Mysql-modules-1.2219/tests/akmisc.t
Msql-Mysql-modules-1.2219/mSQL/
Msql-Mysql-modules-1.2219/mSQL/lib/
Msql-Mysql-modules-1.2219/mSQL/lib/Bundle/
Msql-Mysql-modules-1.2219/mSQL/lib/Bundle/DBD/
Msql-Mysql-modules-1.2219/mSQL/lib/Bundle/DBD/mSQL.pm
Msql-Mysql-modules-1.2219/mSQL/lib/DBD/
Msql-Mysql-modules-1.2219/mSQL/lib/DBD/mSQL.pm
Msql-Mysql-modules-1.2219/mSQL/lib/Msql.pm
Msql-Mysql-modules-1.2219/mSQL/lib/Msql/
Msql-Mysql-modules-1.2219/mSQL/lib/Msql/Statement.pm
Msql-Mysql-modules-1.2219/nodbd/
Msql-Mysql-modules-1.2219/nodbd/nodbd.pm.in
Msql-Mysql-modules-1.2219/nodbd/pmsql.in
Msql-Mysql-modules-1.2219/nodbd/statement.pm.in
Msql-Mysql-modules-1.2219/nodbd/typemap
Msql-Mysql-modules-1.2219/mysql/
Msql-Mysql-modules-1.2219/mysql/lib/
Msql-Mysql-modules-1.2219/mysql/lib/Mysql.pm
Msql-Mysql-modules-1.2219/mysql/lib/Mysql/
Msql-Mysql-modules-1.2219/mysql/lib/Mysql/Statement.pm
Msql-Mysql-modules-1.2219/mysql/lib/DBD/
Msql-Mysql-modules-1.2219/mysql/lib/DBD/mysql.pm
Msql-Mysql-modules-1.2219/mysql/lib/Bundle/
Msql-Mysql-modules-1.2219/mysql/lib/Bundle/DBD/
Msql-Mysql-modules-1.2219/mysql/lib/Bundle/DBD/mysql.pm
Msql-Mysql-modules-1.2219/Makefile.PL
Msql-Mysql-modules-1.2219/MANIFEST
Msql-Mysql-modules-1.2219/MANIFEST.SKIP
Msql-Mysql-modules-1.2219/README
Msql-Mysql-modules-1.2219/ChangeLog
DBI is up to date.
Running install for module Data::ShowTable
Running make for A/AK/AKSTE/Data-ShowTable-3.3.tar.gz
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/id/A/AK/AKSTE/Data-ShowTable-3.3.tar.gz
LWP not available
Fetching with Net::FTP:
  ftp://cpan.inode.at/authors/id/A/AK/AKSTE/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/A/AK/AKSTE/Data-ShowTable-3.3.tar.gz ok
Data-ShowTable-3.3/
Data-ShowTable-3.3/CVS/
Data-ShowTable-3.3/CVS/Entries
Data-ShowTable-3.3/CVS/Repository
Data-ShowTable-3.3/Changes
Data-ShowTable-3.3/Copyright
Data-ShowTable-3.3/Data-ShowTable-2.2.html
Data-ShowTable-3.3/Data-ShowTable-2.3.html
Data-ShowTable-3.3/Data-ShowTable-3.1.html
Data-ShowTable-3.3/Data-ShowTable-3.3.html
Data-ShowTable-3.3/GNU-LICENSE
Data-ShowTable-3.3/MANIFEST
Data-ShowTable-3.3/Makefile.PL
Data-ShowTable-3.3/README
Data-ShowTable-3.3/ShowTable.pm
Data-ShowTable-3.3/gen-html
Data-ShowTable-3.3/gen-tests
Data-ShowTable-3.3/showtable
Data-ShowTable-3.3/showtable-3.1.html
Data-ShowTable-3.3/showtable-3.3.html
Data-ShowTable-3.3/t/
Data-ShowTable-3.3/t/CVS/
Data-ShowTable-3.3/t/CVS/Entries
Data-ShowTable-3.3/t/CVS/Repository
Data-ShowTable-3.3/t/OBJ-TEST.pl
Data-ShowTable-3.3/t/Test-Setup.pl
Data-ShowTable-3.3/t/box-calls.t
Data-ShowTable-3.3/t/box-scaling.t
Data-ShowTable-3.3/t/box-widths.t
Data-ShowTable-3.3/t/box-wrap.t
Data-ShowTable-3.3/t/calls.pl
Data-ShowTable-3.3/t/html-calls.t
Data-ShowTable-3.3/t/html-fmt.t
Data-ShowTable-3.3/t/html-scaling.t
Data-ShowTable-3.3/t/html-widths.t
Data-ShowTable-3.3/t/html-wrap.t
Data-ShowTable-3.3/t/list-calls.t
Data-ShowTable-3.3/t/list-scaling.t
Data-ShowTable-3.3/t/list-widths.t
Data-ShowTable-3.3/t/list-wrap.t
Data-ShowTable-3.3/t/out/
Data-ShowTable-3.3/t/out/CVS/
Data-ShowTable-3.3/t/out/CVS/Entries
Data-ShowTable-3.3/t/out/CVS/Repository
Data-ShowTable-3.3/t/out/box-calls.t-1.ref
Data-ShowTable-3.3/t/out/box-calls.t-2.ref
Data-ShowTable-3.3/t/out/box-calls.t-3.ref
Data-ShowTable-3.3/t/out/box-calls.t-4.ref
Data-ShowTable-3.3/t/out/box-calls.t-5.ref
Data-ShowTable-3.3/t/out/box-calls.t-6.ref
Data-ShowTable-3.3/t/out/box-calls.t-7.ref
Data-ShowTable-3.3/t/out/box-calls.t-8.ref
Data-ShowTable-3.3/t/out/box-scaling.t-1.ref
Data-ShowTable-3.3/t/out/box-scaling.t-2.ref
Data-ShowTable-3.3/t/out/box-scaling.t-3.ref
Data-ShowTable-3.3/t/out/box-scaling.t-4.ref
Data-ShowTable-3.3/t/out/box-scaling.t-5.ref
Data-ShowTable-3.3/t/out/box-scaling.t-6.ref
Data-ShowTable-3.3/t/out/box-scaling.t-7.ref
Data-ShowTable-3.3/t/out/box-scaling.t-8.ref
Data-ShowTable-3.3/t/out/box-widths.t-1.ref
Data-ShowTable-3.3/t/out/box-widths.t-2.ref
Data-ShowTable-3.3/t/out/box-widths.t-3.ref
Data-ShowTable-3.3/t/out/box-widths.t-4.ref
Data-ShowTable-3.3/t/out/box-widths.t-5.ref
Data-ShowTable-3.3/t/out/box-widths.t-6.ref
Data-ShowTable-3.3/t/out/box-widths.t-7.ref
Data-ShowTable-3.3/t/out/box-widths.t-8.ref
Data-ShowTable-3.3/t/out/box-wrap.t-1.ref
Data-ShowTable-3.3/t/out/box-wrap.t-2.ref
Data-ShowTable-3.3/t/out/box-wrap.t-3.ref
Data-ShowTable-3.3/t/out/box-wrap.t-4.ref
Data-ShowTable-3.3/t/out/box-wrap.t-5.ref
Data-ShowTable-3.3/t/out/html-calls.t-1.ref
Data-ShowTable-3.3/t/out/html-calls.t-2.ref
Data-ShowTable-3.3/t/out/html-calls.t-3.ref
Data-ShowTable-3.3/t/out/html-calls.t-4.ref
Data-ShowTable-3.3/t/out/html-calls.t-5.ref
Data-ShowTable-3.3/t/out/html-calls.t-6.ref
Data-ShowTable-3.3/t/out/html-calls.t-7.ref
Data-ShowTable-3.3/t/out/html-calls.t-8.ref
Data-ShowTable-3.3/t/out/html-fmt.t-1.ref
Data-ShowTable-3.3/t/out/html-fmt.t-10.ref
Data-ShowTable-3.3/t/out/html-fmt.t-11.ref
Data-ShowTable-3.3/t/out/html-fmt.t-12.ref
Data-ShowTable-3.3/t/out/html-fmt.t-2.ref
Data-ShowTable-3.3/t/out/html-fmt.t-3.ref
Data-ShowTable-3.3/t/out/html-fmt.t-4.ref
Data-ShowTable-3.3/t/out/html-fmt.t-5.ref
Data-ShowTable-3.3/t/out/html-fmt.t-6.ref
Data-ShowTable-3.3/t/out/html-fmt.t-7.ref
Data-ShowTable-3.3/t/out/html-fmt.t-8.ref
Data-ShowTable-3.3/t/out/html-fmt.t-9.ref
Data-ShowTable-3.3/t/out/html-scaling.t-1.ref
Data-ShowTable-3.3/t/out/html-scaling.t-2.ref
Data-ShowTable-3.3/t/out/html-scaling.t-3.ref
Data-ShowTable-3.3/t/out/html-scaling.t-4.ref
Data-ShowTable-3.3/t/out/html-scaling.t-5.ref
Data-ShowTable-3.3/t/out/html-scaling.t-6.ref
Data-ShowTable-3.3/t/out/html-scaling.t-7.ref
Data-ShowTable-3.3/t/out/html-scaling.t-8.ref
Data-ShowTable-3.3/t/out/html-widths.t-1.ref
Data-ShowTable-3.3/t/out/html-widths.t-2.ref
Data-ShowTable-3.3/t/out/html-widths.t-3.ref
Data-ShowTable-3.3/t/out/html-widths.t-4.ref
Data-ShowTable-3.3/t/out/html-widths.t-5.ref
Data-ShowTable-3.3/t/out/html-widths.t-6.ref
Data-ShowTable-3.3/t/out/html-widths.t-7.ref
Data-ShowTable-3.3/t/out/html-widths.t-8.ref
Data-ShowTable-3.3/t/out/html-wrap.t-1.ref
Data-ShowTable-3.3/t/out/html-wrap.t-2.ref
Data-ShowTable-3.3/t/out/html-wrap.t-3.ref
Data-ShowTable-3.3/t/out/html-wrap.t-4.ref
Data-ShowTable-3.3/t/out/html-wrap.t-5.ref
Data-ShowTable-3.3/t/out/list-calls.t-1.ref
Data-ShowTable-3.3/t/out/list-calls.t-2.ref
Data-ShowTable-3.3/t/out/list-calls.t-3.ref
Data-ShowTable-3.3/t/out/list-calls.t-4.ref
Data-ShowTable-3.3/t/out/list-calls.t-5.ref
Data-ShowTable-3.3/t/out/list-calls.t-6.ref
Data-ShowTable-3.3/t/out/list-calls.t-7.ref
Data-ShowTable-3.3/t/out/list-calls.t-8.ref
Data-ShowTable-3.3/t/out/list-scaling.t-1.ref
Data-ShowTable-3.3/t/out/list-scaling.t-2.ref
Data-ShowTable-3.3/t/out/list-scaling.t-3.ref
Data-ShowTable-3.3/t/out/list-scaling.t-4.ref
Data-ShowTable-3.3/t/out/list-scaling.t-5.ref
Data-ShowTable-3.3/t/out/list-scaling.t-6.ref
Data-ShowTable-3.3/t/out/list-scaling.t-7.ref
Data-ShowTable-3.3/t/out/list-scaling.t-8.ref
Data-ShowTable-3.3/t/out/list-widths.t-1.ref
Data-ShowTable-3.3/t/out/list-widths.t-2.ref
Data-ShowTable-3.3/t/out/list-widths.t-3.ref
Data-ShowTable-3.3/t/out/list-widths.t-4.ref
Data-ShowTable-3.3/t/out/list-widths.t-5.ref
Data-ShowTable-3.3/t/out/list-widths.t-6.ref
Data-ShowTable-3.3/t/out/list-widths.t-7.ref
Data-ShowTable-3.3/t/out/list-widths.t-8.ref
Data-ShowTable-3.3/t/out/list-wrap.t-1.ref
Data-ShowTable-3.3/t/out/list-wrap.t-2.ref
Data-ShowTable-3.3/t/out/list-wrap.t-3.ref
Data-ShowTable-3.3/t/out/list-wrap.t-4.ref
Data-ShowTable-3.3/t/out/list-wrap.t-5.ref
Data-ShowTable-3.3/t/out/simple-calls.t-1.ref
Data-ShowTable-3.3/t/out/simple-calls.t-2.ref
Data-ShowTable-3.3/t/out/simple-calls.t-3.ref
Data-ShowTable-3.3/t/out/simple-calls.t-4.ref
Data-ShowTable-3.3/t/out/simple-calls.t-5.ref
Data-ShowTable-3.3/t/out/simple-calls.t-6.ref
Data-ShowTable-3.3/t/out/simple-calls.t-7.ref
Data-ShowTable-3.3/t/out/simple-calls.t-8.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-1.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-2.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-3.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-4.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-5.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-6.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-7.ref
Data-ShowTable-3.3/t/out/simple-scaling.t-8.ref
Data-ShowTable-3.3/t/out/simple-widths.t-1.ref
Data-ShowTable-3.3/t/out/simple-widths.t-2.ref
Data-ShowTable-3.3/t/out/simple-widths.t-3.ref
Data-ShowTable-3.3/t/out/simple-widths.t-4.ref
Data-ShowTable-3.3/t/out/simple-widths.t-5.ref
Data-ShowTable-3.3/t/out/simple-widths.t-6.ref
Data-ShowTable-3.3/t/out/simple-widths.t-7.ref
Data-ShowTable-3.3/t/out/simple-widths.t-8.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-1.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-2.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-3.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-4.ref
Data-ShowTable-3.3/t/out/simple-wrap.t-5.ref
Data-ShowTable-3.3/t/scaling.pl
Data-ShowTable-3.3/t/showtable.pl
Data-ShowTable-3.3/t/simple-calls.t
Data-ShowTable-3.3/t/simple-scaling.t
Data-ShowTable-3.3/t/simple-widths.t
Data-ShowTable-3.3/t/simple-wrap.t
Data-ShowTable-3.3/t/testfile
Data-ShowTable-3.3/t/widths.pl
Data-ShowTable-3.3/t/wrap.pl
Data-ShowTable-3.3/test.pl.off
Data-ShowTable-3.3/testfile.lst
Data-ShowTable-3.3/testfile.tabs
Data-ShowTable-3.3/update-public

  CPAN.pm: Going to build A/AK/AKSTE/Data-ShowTable-3.3.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for Data::ShowTable
cp ShowTable.pm blib/lib/Data/ShowTable.pm
cp showtable blib/script/showtable
/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/showtable
Manifying blib/man1/showtable.1
Manifying blib/man3/Data::ShowTable.3pm
*** ERROR: unterminated I<...> at line 724 in file ShowTable.pm
*** ERROR: unterminated I<...> at line 724 in file ShowTable.pm
  /usr/bin/make  -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/box-calls.........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/box-calls.........ok
t/box-scaling.......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/box-scaling.......ok
t/box-widths........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/box-widths........ok
t/box-wrap..........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/box-wrap..........ok
t/html-calls........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-calls........ok
t/html-fmt..........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-fmt..........ok
t/html-scaling......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-scaling......ok
t/html-widths.......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-widths.......ok
t/html-wrap.........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/html-wrap.........ok
t/list-calls........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/list-calls........ok
t/list-scaling......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/list-scaling......ok
t/list-widths.......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/list-widths.......ok
t/list-wrap.........Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/list-wrap.........ok
t/simple-calls......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/simple-calls......ok
t/simple-scaling....Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/simple-scaling....ok
t/simple-widths.....Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/simple-widths.....ok
t/simple-wrap.......Prototype mismatch: sub main::start_tests ($) vs none at t/Test-Setup.pl line 27.
Prototype mismatch: sub main::run_test ($&) vs none at t/Test-Setup.pl line 102.
t/simple-wrap.......ok
All tests successful.
Files=17, Tests=128,  1 wallclock secs ( 0.95 cusr +  0.53 csys =  1.48 CPU)
  /usr/bin/make test -- OK
Running make install
Installing /usr/lib/perl5/site_perl/5.8.1/Data/ShowTable.pm
Installing /usr/share/man/man1/showtable.1
Installing /usr/share/man/man3/Data::ShowTable.3pm
Installing /usr/bin/showtable
Writing /usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/Data/ShowTable/.packlist
Appending installation info to /usr/lib/perl5/5.8.1/i586-linux-thread-multi/perllocal.pod
  /usr/bin/make install  -- OK
Running install for module Mysql
Running make for R/RU/RUDY/DBD-mysql-2.9003.tar.gz
Checksum for /root/.cpan/sources/authors/id/R/RU/RUDY/DBD-mysql-2.9003.tar.gz ok
DBD-mysql-2.9003/
DBD-mysql-2.9003/t/
DBD-mysql-2.9003/t/mysql2.t
DBD-mysql-2.9003/t/akmisc.t
DBD-mysql-2.9003/t/60leaks.t
DBD-mysql-2.9003/t/10dsnlist.t
DBD-mysql-2.9003/t/ak-dbd.t
DBD-mysql-2.9003/t/50chopblanks.t
DBD-mysql-2.9003/t/mysql.t
DBD-mysql-2.9003/t/lib.pl
DBD-mysql-2.9003/t/40blobs.t
DBD-mysql-2.9003/t/40nulls.t
DBD-mysql-2.9003/t/insertid.t
DBD-mysql-2.9003/t/40listfields.t
DBD-mysql-2.9003/t/40bindparam.t
DBD-mysql-2.9003/t/mysql.dbtest
DBD-mysql-2.9003/t/dbdadmin.t
DBD-mysql-2.9003/t/20createdrop.t
DBD-mysql-2.9003/t/00base.t
DBD-mysql-2.9003/t/30insertfetch.t
DBD-mysql-2.9003/t/40numrows.t
DBD-mysql-2.9003/t/50commit.t
DBD-mysql-2.9003/t/mysql.mtest
DBD-mysql-2.9003/MANIFEST
DBD-mysql-2.9003/myld
DBD-mysql-2.9003/dbdimp.c
DBD-mysql-2.9003/lib/
DBD-mysql-2.9003/lib/DBD/
DBD-mysql-2.9003/lib/DBD/mysql/
DBD-mysql-2.9003/lib/DBD/mysql/GetInfo.pm
DBD-mysql-2.9003/lib/DBD/mysql/INSTALL.pod
DBD-mysql-2.9003/lib/DBD/mysql.pm
DBD-mysql-2.9003/lib/Mysql/
DBD-mysql-2.9003/lib/Mysql/Statement.pm
DBD-mysql-2.9003/lib/Bundle/
DBD-mysql-2.9003/lib/Bundle/DBD/
DBD-mysql-2.9003/lib/Bundle/DBD/mysql.pm
DBD-mysql-2.9003/lib/Mysql.pm
DBD-mysql-2.9003/dbdimp.h
DBD-mysql-2.9003/mysql.xs
DBD-mysql-2.9003/MANIFEST.SKIP
DBD-mysql-2.9003/README
DBD-mysql-2.9003/INSTALL.html
DBD-mysql-2.9003/Makefile.PL
DBD-mysql-2.9003/ChangeLog
DBD-mysql-2.9003/constants.h
DBD-mysql-2.9003/TODO
Removing previously used /root/.cpan/build/DBD-mysql-2.9003

  CPAN.pm: Going to build R/RU/RUDY/DBD-mysql-2.9003.tar.gz

I will use the following settings for compiling and testing:

  cflags        (mysql_config) = -I'/usr/include/mysql'
  libs          (mysql_config) = -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm
  nocatchstderr (default     ) = 0
  nofoundrows   (default     ) = 0
  ssl           (guessed     ) = 0
  testdb        (default     ) = test
  testhost      (default     ) =
  testpassword  (default     ) =
  testuser      (default     ) =

To change these settings, see 'perl Makefile.PL --help' and
'perldoc INSTALL'.

Checking if your kit is complete...
Looks good
Using DBI 1.42 (for perl 5.008001 on i586-linux-thread-multi) installed in /usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/DBI
Writing Makefile for DBD::mysql
cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm
cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
cp lib/Mysql.pm blib/lib/Mysql.pm
cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
cc -c  -I/usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/DBI -I'/usr/include/mysql' -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -march=i586 -mcpu=i686 -fmessage-length=0 -Wall -pipe   -DVERSION=\"2.9003\" -DXS_VERSION=\"2.9003\" -fPIC "-I/usr/lib/perl5/5.8.1/i586-linux-thread-multi/CORE"   dbdimp.c
dbdimp.c: In function `CountParam':
dbdimp.c:61: Warnung: suggest parentheses around assignment used as truth value
dbdimp.c: In function `ParseParam':
dbdimp.c:239: Warnung: label `Default' defined but not used
/usr/bin/perl -p -e "s/~DRIVER~/mysql/g" /usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/DBI/Driver.xst > mysql.xsi
/usr/bin/perl /usr/lib/perl5/5.8.1/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.8.1/ExtUtils/typemap  mysql.xs > mysql.xsc && mv mysql.xsc mysql.c
Warning: duplicate function definition 'do' detected in mysql.xs, line 192
Warning: duplicate function definition 'rows' detected in mysql.xs, line 290
cc -c  -I/usr/lib/perl5/site_perl/5.8.1/i586-linux-thread-multi/auto/DBI -I'/usr/include/mysql' -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -march=i586 -mcpu=i686 -fmessage-length=0 -Wall -pipe   -DVERSION=\"2.9003\" -DXS_VERSION=\"2.9003\" -fPIC "-I/usr/lib/perl5/5.8.1/i586-linux-thread-multi/CORE"   mysql.c
mysql.xs: In function `XS_DBD__mysql__GetInfo_dbd_mysql_get_info':
mysql.xs:351: Warnung: implicit declaration of function `is_prefix'
mysql.xs:324: Warnung: `retsv' might be used uninitialized in this function
Running Mkbootstrap for DBD::mysql ()
chmod 644 mysql.bs
rm -f blib/arch/auto/DBD/mysql/mysql.so
LD_RUN_PATH="/usr/lib/mysql:/lib" /usr/bin/perl myld cc  -shared dbdimp.o mysql.o  -o blib/arch/auto/DBD/mysql/mysql.so   -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm
/usr/lib/gcc-lib/i586-suse-linux/3.3.1/../../../../i586-suse-linux/bin/ld: cannot find -lz
collect2: ld returned 1 exit status


An error occurred while linking the DBD::mysql driver. The error
message seems to indicate that you don't have a libz.a,
or a libz.so. This is typically resolved by:

1.) You may try to remove the -lz or -lgz flag from the libs list
    by using the --libs switch for "perl Makefile.PL".
2.) On Red Hat Linux install libz-devel
3.) On other systems, please contact the mailing list

     Msql-Mysql-modules@lists.mysql.com

For further hints, see INSTALL.html, section Linker flags.
make: *** [blib/arch/auto/DBD/mysql/mysql.so] Fehler 1
  /usr/bin/make  -- NOT OK
Running make test
  Can't test without successful make
Running make install
  make had returned bad status, install seems impossible
Running install for module DBD::mysql
Running make for R/RU/RUDY/DBD-mysql-2.9003.tar.gz
  Is already unwrapped into directory /root/.cpan/build/DBD-mysql-2.9003
  Has already been processed within this session
Running make test
  Can't test without successful make
Running make install
  make had returned bad status, install seems impossible
Bundle summary: The following items in bundle Bundle::DBD::mysql had
installation problems:
  Mysql DBD::mysql

cpan>



[/EDIT]

[EDIT]

Ich habs nun hinbekommen, indem ich das Packet "perl-Msql-Mysql-modules" von der Suse CD installiert habe.
Vielen Dank daxim!
darnouar
 
Posts: 11
Joined: 26. October 2003 18:51


Return to XAMPP für Linux

Who is online

Users browsing this forum: No registered users and 1 guest