I can't connect to mysql, it says:
Error message:
install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Applications/XAMPP/xamppfiles/lib/perl5/site_perl/5.16.3/darwin-thread-multi-2level /Applications/XAMPP/xamppfiles/lib/perl5/site_perl/5.16.3 /Applications/XAMPP/xamppfiles/lib/perl5/5.16.3/darwin-thread-multi-2level /Applications/XAMPP/xamppfiles/lib/perl5/5.16.3 . /Applications/XAMPP/xamppfiles) at (eval 13) line 3. Perhaps the DBD::mysql perl module hasn't been fully installed, or perhaps the capitalisation of 'mysql' isn't right. Available drivers: DBM, ExampleP, File, Gofer, MariaDB, PgPP, Proxy, SQLite, Sponge. at /Applications/XAMPP/xamppfiles/htdocs/myproject/index.pl line 84.
So i tried to install the module that I use to connect to mysql, which is DBI (use DBI;)
I open a Terminal and write install DBI, but something seems to be wrong, what do I do?
((cpan[1]> install DBI
Reading '/Users/Eagle/.cpan/Metadata'
Database was generated on Wed, 09 Oct 2019 21:29:02 GMT
Fetching with LWP:
http://mirror.pregi.net/CPAN/authors/01mailrc.txt.gz
Reading '/Users/Eagle/.cpan/sources/authors/01mailrc.txt.gz'
............................................................................DONE
Fetching with LWP:
http://mirror.pregi.net/CPAN/modules/02packages.details.txt.gz
Reading '/Users/Eagle/.cpan/sources/modules/02packages.details.txt.gz'
Database was generated on Fri, 11 Oct 2019 13:17:03 GMT
.............
New CPAN.pm version (v2.27) available.
[Currently running version is v2.00]
You might want to try
install CPAN
reload cpan
to both upgrade CPAN.pm and run the new version without leaving
the current session.
...............................................................DONE
Fetching with LWP:
http://mirror.pregi.net/CPAN/modules/03modlist.data.gz
Reading '/Users/Eagle/.cpan/sources/modules/03modlist.data.gz'
DONE
Writing /Users/Eagle/.cpan/Metadata
Running install for module 'DBI'
Running make for T/TI/TIMB/DBI-1.642.tar.gz
Checksum for /Users/Eagle/.cpan/sources/authors/id/T/TI/TIMB/DBI-1.642.tar.gz ok
Scanning cache /Users/Eagle/.cpan/build for sizes
............................................................................DONE
CPAN.pm: Building T/TI/TIMB/DBI-1.642.tar.gz
*** Your LANG environment variable is set to 'da_DK.UTF-8'
*** This may cause problems for some perl installations.
*** If you get test failures, please try again with LANG unset.
*** If that then works, please email dbi-dev@perl.org with details
*** including the output of 'perl -V'
Your perl was compiled with gcc (version 4.2.1 Compatible Apple LLVM 10.0.1 (clang-1001.0.37.14)), okay.
Creating test wrappers for DBD::Gofer:
t/zvg_01basics.t
t/zvg_02dbidrv.t
t/zvg_03handle.t
t/zvg_04mods.t
t/zvg_05concathash.t
t/zvg_06attrs.t
t/zvg_07kids.t
t/zvg_08keeperr.t
t/zvg_09trace.t
t/zvg_10examp.t
t/zvg_11fetch.t
t/zvg_12quote.t
t/zvg_13taint.t
t/zvg_14utf8.t
t/zvg_15array.t
t/zvg_16destroy.t
t/zvg_19fhtrace.t
t/zvg_20meta.t
t/zvg_30subclass.t
t/zvg_31methcache.t
t/zvg_35thrclone.t (use threads)
t/zvg_40profile.t
t/zvg_41prof_dump.t
t/zvg_42prof_data.t
t/zvg_43prof_env.t
t/zvg_48dbi_dbd_sqlengine.t
t/zvg_49dbd_file.t
t/zvg_50dbm_simple.t
t/zvg_51dbm_file.t
t/zvg_52dbm_complex.t
t/zvg_53sqlengine_adv.t
t/zvg_54_dbd_mem.t
t/zvg_60preparse.t
t/zvg_65transact.t
t/zvg_70callbacks.t
t/zvg_72childhandles.t
t/zvg_73cachedkids.t
t/zvg_80proxy.t
t/zvg_85gofer.t
t/zvg_86gofer_fail.t
t/zvg_87gofer_cache.t
t/zvg_90sql_type_cast.t
t/zvg_91_store_warning.t
Creating test wrappers for DBI::SQL::Nano:
t/zvn_48dbi_dbd_sqlengine.t
t/zvn_49dbd_file.t
t/zvn_50dbm_simple.t
t/zvn_51dbm_file.t
t/zvn_52dbm_complex.t
t/zvn_85gofer.t
Creating test wrappers for DBI::PurePerl:
t/zvp_01basics.t
t/zvp_02dbidrv.t
t/zvp_03handle.t
t/zvp_04mods.t
t/zvp_05concathash.t
t/zvp_06attrs.t
t/zvp_07kids.t
t/zvp_08keeperr.t
t/zvp_09trace.t
t/zvp_10examp.t
t/zvp_11fetch.t
t/zvp_12quote.t
t/zvp_13taint.t
t/zvp_14utf8.t
t/zvp_15array.t
t/zvp_16destroy.t
t/zvp_19fhtrace.t
t/zvp_20meta.t
t/zvp_30subclass.t
t/zvp_31methcache.t
t/zvp_35thrclone.t (use threads)
t/zvp_40profile.t
t/zvp_41prof_dump.t
t/zvp_42prof_data.t
t/zvp_43prof_env.t
t/zvp_48dbi_dbd_sqlengine.t
t/zvp_49dbd_file.t
t/zvp_50dbm_simple.t
t/zvp_51dbm_file.t
t/zvp_52dbm_complex.t
t/zvp_53sqlengine_adv.t
t/zvp_54_dbd_mem.t
t/zvp_60preparse.t
t/zvp_65transact.t
t/zvp_70callbacks.t
t/zvp_72childhandles.t
t/zvp_73cachedkids.t
t/zvp_80proxy.t
t/zvp_85gofer.t
t/zvp_86gofer_fail.t
t/zvp_87gofer_cache.t
t/zvp_90sql_type_cast.t
t/zvp_91_store_warning.t
Creating test wrappers for DBD::Gofer + DBI::SQL::Nano:
t/zvxgn_48dbi_dbd_sqlengine.t
t/zvxgn_49dbd_file.t
t/zvxgn_50dbm_simple.t
t/zvxgn_51dbm_file.t
t/zvxgn_52dbm_complex.t
t/zvxgn_85gofer.t
Creating test wrappers for DBD::Gofer + DBI::PurePerl:
t/zvxgp_01basics.t
t/zvxgp_02dbidrv.t
t/zvxgp_03handle.t
t/zvxgp_04mods.t
t/zvxgp_05concathash.t
t/zvxgp_06attrs.t
t/zvxgp_07kids.t
t/zvxgp_08keeperr.t
t/zvxgp_09trace.t
t/zvxgp_10examp.t
t/zvxgp_11fetch.t
t/zvxgp_12quote.t
t/zvxgp_13taint.t
t/zvxgp_14utf8.t
t/zvxgp_15array.t
t/zvxgp_16destroy.t
t/zvxgp_19fhtrace.t
t/zvxgp_20meta.t
t/zvxgp_30subclass.t
t/zvxgp_31methcache.t
t/zvxgp_35thrclone.t (use threads)
t/zvxgp_40profile.t
t/zvxgp_41prof_dump.t
t/zvxgp_42prof_data.t
t/zvxgp_43prof_env.t
t/zvxgp_48dbi_dbd_sqlengine.t
t/zvxgp_49dbd_file.t
t/zvxgp_50dbm_simple.t
t/zvxgp_51dbm_file.t
t/zvxgp_52dbm_complex.t
t/zvxgp_53sqlengine_adv.t
t/zvxgp_54_dbd_mem.t
t/zvxgp_60preparse.t
t/zvxgp_65transact.t
t/zvxgp_70callbacks.t
t/zvxgp_72childhandles.t
t/zvxgp_73cachedkids.t
t/zvxgp_80proxy.t
t/zvxgp_85gofer.t
t/zvxgp_86gofer_fail.t
t/zvxgp_87gofer_cache.t
t/zvxgp_90sql_type_cast.t
t/zvxgp_91_store_warning.t
Creating test wrappers for DBI::SQL::Nano + DBI::PurePerl:
t/zvxnp_48dbi_dbd_sqlengine.t
t/zvxnp_49dbd_file.t
t/zvxnp_50dbm_simple.t
t/zvxnp_51dbm_file.t
t/zvxnp_52dbm_complex.t
t/zvxnp_85gofer.t
Creating test wrappers for DBD::Gofer + DBI::SQL::Nano + DBI::PurePerl:
t/zvxgnp_48dbi_dbd_sqlengine.t
t/zvxgnp_49dbd_file.t
t/zvxgnp_50dbm_simple.t
t/zvxgnp_51dbm_file.t
t/zvxgnp_52dbm_complex.t
t/zvxgnp_85gofer.t
Checking if your kit is complete...
Looks good
I see you're using perl 5.018004 on darwin-thread-multi-2level, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
Writing MYMETA.yml and MYMETA.json
make: *** No rule to make target `/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.13.sdk/System/Library/Perl/5.18/darwin-thread-multi-2level/CORE/config.h', needed by `Makefile'. Stop.
TIMB/DBI-1.642.tar.gz
/usr/bin/make -- NOT OK
'YAML' not installed, will not store persistent state
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
TIMB/DBI-1.642.tar.gz : make NO