Error starting "XAMPP" stack: cannot start stack: ssh not ac

Problems with the Mac OS X version of XAMPP, questions, comments, and anything related.

Error starting "XAMPP" stack: cannot start stack: ssh not ac

Postby devif » 20. November 2017 23:46

Hello,

First time xamp user, I tried to edit my etc/network/interfaces file to get a fixed ip and now xamp does not start giving the error:
Error starting "XAMPP" stack: cannot start stack: ssh not accessible

I tried reinstalling but I get the same error so I am completely stuck now.. Some kind of persisting preference somewhere ?

I used:
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers 192.168.1.1
devif
 
Posts: 5
Joined: 20. November 2017 23:42
XAMPP version: 7.1.11-0-preview-1
Operating System: osx

Re: Error starting "XAMPP" stack: cannot start stack: ssh no

Postby devif » 21. November 2017 17:42

fixed by deleting ~/.bitnami and restarting... Is it impossible to get a fixed ip ?
devif
 
Posts: 5
Joined: 20. November 2017 23:42
XAMPP version: 7.1.11-0-preview-1
Operating System: osx

Re: Error starting "XAMPP" stack: cannot start stack: ssh no

Postby Beltran » 24. November 2017 15:52

This is not supported right now. A possible workaround is to enable the network tunnel so you can use localhost or the IP of your OS X to access remotely.
User avatar
Beltran
Power-User
 
Posts: 170
Joined: 22. March 2013 12:29
XAMPP version: 10
Operating System: Windows, Linux, OS X

Re: Error starting "XAMPP" stack: cannot start stack: ssh no

Postby dharman » 01. August 2018 21:26

I am also a very new user. Just got the same message "ssh not accessible". I got around it by turning off my macOS firewall. XAMPP started right up with the firewall down. I would like to put the firewall on and give permission to the required programs to pass through it but I do not know what programs require permission. Any advice appreciated.
dharman
 
Posts: 3
Joined: 01. August 2018 21:02
XAMPP version: 1.0.3
Operating System: macOS 10.13.6

Re: Error starting "XAMPP" stack: cannot start stack: ssh no

Postby markobravo » 22. January 2020 22:51

I had the same problem: SSH not available. I followed the instructions in the thread and got it to work: https://community.apachefriends.org/viewtopic.php?p=257806&sid=dabee0c749730a85d36f630aff1e524e#p263956
markobravo
 
Posts: 1
Joined: 22. January 2020 21:58
XAMPP version: 7.4
Operating System: macOS Catalina


Return to XAMPP for macOS

Who is online

Users browsing this forum: No registered users and 20 guests