Xampp unter Windows in VMWare

Irgendwelche Probleme mit XAMPP für Mac OS X? Dann ist hier genau der richtige Ort um nachzufragen.

Xampp unter Windows in VMWare

Postby heinetz » 14. January 2009 00:33

Hallo Forum,

auf meinem Macbook habe ich mir gerade Xampp installiert. Mit der Hilfe hier
habe ich das zu meiner vollen Zufriedenheit und relativ schnell hinbekommen:

Es startet automatisch beim Booten und vhosts lassen sich prima konfigurieren.

Als alter Windows-User habe ich VMWare mit einem Windows XP installiert,
dass ich auch des Öfteren nutze.

Wie kann ich per http:// unter WIndows auf den Apachen zugreifen ?

danke für Tipps und

beste gruesse,
heinetz
heinetz
 
Posts: 88
Joined: 02. January 2004 12:37

Re: Xampp unter Windows in VMWare

Postby Nobbie » 14. January 2009 11:41

Das fragst Du besser in einem VMWare Forum oder OSX Forum.

VMWare legt (wahrscheinlich - ich kenne die OSX Version nicht) virtuelle Netzwerkadapter in OSX an. Da OSX im Prinzip wie Linux funktioniert, kannst Du mal als Administrator (ist das auch "root"?) in einer Konsole den Befehl "ifconfig" eingeben. Da werden alle Adapter aufgelistet (eth0 ist beispielsweise die 1. Netzwerkkarte), da könnte ein VMWare Adapter auftauchen (ich habe keine Ahnung, wie der heißt). Falls es welche gibt, merke Dir die IP. Auch von eth0 solltest Du die IP Dir merken (wenn es eine gibt).

Außerdem schau auch innerhalb von WindowsXP in den Netzwerkverbindungen nach, auch dort müßte es Adapter geben. Schau auch deren IPs nach.

Und dann probierst Du nacheinander alle IPs aus, die Du gefunden hast (http://xxx.xxx.xxx.xxx). Ich weiß nicht, wie VMWare die virtuelle Netzwerkkarte mit OSX verbindet (NAT, Hostinterface, eigenes Netzwerk - das sind die Optionen bei VirtualBox, ebenfalls einem virtuellen PC), deswegen ist die Frage nicht so einfach zu beantworten.
Nobbie
 
Posts: 13171
Joined: 09. March 2008 13:04

Re: Xampp unter Windows in VMWare

Postby heinetz » 14. January 2009 13:02

Hallo Forum,

ich hab's soweit grundsätzlich hinbekommen:

Als Netzwerkmodus ist die virtuelle Maschine unter VMWare 'bridged'. Das äussert sich so,
dass die Windows-Maschine wie ein eigener Rechner im Netzwerk steht. Wirt und Gast haben
je eine eigene IP und der Wirt lässt sich vom Gast anpingen und umgekehrt.

Ich erreiche den MAC von Windows über http://<wirt_computername> und sehe den Inhalt
des Xampp-DocumentRoot. Ich hätte eigentlich erwartet, dass http://<wirt_ip> genauso
funktioniert. Das tut es allerdings nicht.

Kann das eine Einstellung des Apachen sein ?

danke für Tipps und

beste gruesse,
heinetz
heinetz
 
Posts: 88
Joined: 02. January 2004 12:37

Re: Xampp unter Windows in VMWare

Postby Wiedmann » 14. January 2009 13:10

die Windows-Maschine wie ein eigener Rechner im Netzwerk steht. Wirt und Gast haben
je eine eigene IP
...
Ich hätte eigentlich erwartet, dass http://<wirt_ip> genauso
funktioniert. Das tut es allerdings nicht.

Da "Wirt" ja ein eigener (eigenständiger) Rechner mit einer eigenen Netzwerkkarte/IP im Netz ist, kann das nicht gehen. Dazu müsste dann auch ein Apache auf dem "Wirt" laufen.

Wenn du jetzt einen Desktop und einen Notebook hättest, auf dem Desktop läuft ein Apache, würdest du ja auch nicht erwarten, dass auf dem Notebook mit "http://notebook_ip" der Apache auf dem Desktop zu erreichen wäre...
Wiedmann
AF Moderator
 
Posts: 17102
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: Xampp unter Windows in VMWare

Postby Nobbie » 14. January 2009 13:32

Wiedmann wrote:Da "Wirt" ja ein eigener (eigenständiger) Rechner mit einer eigenen Netzwerkkarte/IP im Netz ist, kann das nicht gehen. Dazu müsste dann auch ein Apache auf dem "Wirt" laufen.


Das hast Du jetzt verdreht - "Wirt" (= Host) ist OSX und genau da läuft der (Xampp)-Apache. Das WindowsXP ist der Gast (= client). Dort führt http://wirt_computername auf die Xampp-Startseite, aber http://wirt_ip vermeintlich nicht. Die Frage ist, was ist "wirt_ip" in welchem Kontext?
Nobbie
 
Posts: 13171
Joined: 09. March 2008 13:04

Re: Xampp unter Windows in VMWare

Postby heinetz » 15. January 2009 15:37

so, ich habe das ganze nochmal unabhängig von Wirt und Gast gemacht und folgendes
festgestellt:

Wenn ich im Browser:

http://127.0.0.1 oder
http://computername oder
http://localhost

... eingebe, sehe ich den Inhalt des unter Apache definierten DocRoot.

Wenn ich jedoch die feste ip:

http:// 192.168.1.160

... eingebe, gibt's ein:

404
The requested URL / was not found on this server.

Dafür dürfte doch eine Konfiguration des Apachen verantwortlich sein,
oder ? Ich kann weder in der httpd.conf:

Code: Select all
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/Applications/xampp/xamppfiles" will be interpreted by the
# server as "/Applications/xampp/xamppfiles/logs/foo.log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/Applications/xampp/xamppfiles"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule bucketeer_module modules/mod_bucketeer.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule echo_module modules/mod_echo.so
LoadModule case_filter_module modules/mod_case_filter.so
LoadModule case_filter_in_module modules/mod_case_filter_in.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule php5_module        modules/libphp5.so
#LoadModule php4_module        modules/libphp4.so

<IfDefine PHP4>
LoadModule php4_module        modules/libphp4.so
</IfDefine>
<IfDefine PHP5>
LoadModule php5_module        modules/libphp5.so
</IfDefine>


AddType application/x-httpd-php .php .php3 .php4 .php5
AddType application/x-httpd-php-source .phps
AddHandler cgi-script .cgi .pl

<IfModule !mpm_netware_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User nobody
Group admin
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/Applications/xampp/xamppfiles/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/Applications/xampp/xamppfiles/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks ExecCGI Includes

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.php index.htmls index.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access_log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access_log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/Applications/xampp/xamppfiles/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "/Applications/xampp/xamppfiles/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
Alias /phpmyadmin /Applications/xampp/xamppfiles/phpmyadmin
<Directory "/Applications/xampp/xamppfiles/phpmyadmin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

<Directory "/Applications/xampp/xamppfiles/cgi-bin">
    AllowOverride None
    Options None +ExecCGI
    Order allow,deny
    Allow from all
</Directory>

Alias /phpsqliteadmin /Applications/xampp/xamppfiles/phpsqliteadmin
<Directory "/Applications/xampp/xamppfiles/phpsqliteadmin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>



#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /Applications/xampp/etc/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile /Applications/xampp/etc/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the /Applications/xampp/etc/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include /Applications/xampp/etc/extra/httpd-mpm.conf

# Multi-language error messages
#Include /Applications/xampp/etc/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include /Applications/xampp/etc/extra/httpd-autoindex.conf

# Language settings
#Include /Applications/xampp/etc/extra/httpd-languages.conf

# User home directories
Include /Applications/xampp/etc/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /Applications/xampp/etc/extra/httpd-info.conf

# Virtual hosts
Include /Applications/xampp/etc/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /Applications/xampp/etc/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /Applications/xampp/etc/extra/httpd-dav.conf

# Various default settings
#Include /Applications/xampp/etc/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include /Applications/xampp/etc/extra/httpd-ssl.conf

<IfDefine SSL>
   Include /Applications/xampp/etc/extra/httpd-ssl.conf
</IfDefine>


#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>


... noch in meiner httpd-vhosts.conf:

Code: Select all
NameVirtualHost *:80
NameVirtualHost *:443

<Directory "/Users/martinhein/Sites">
    Options Indexes FollowSymLinks ExecCGI Includes
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>

<VirtualHost *:80>
    UseCanonicalName off
    servername %1.leopold.net
    VirtualDocumentRoot /Users/martinhein/Sites/%1
</VirtualHost>

<VirtualHost *:443>
    UseCanonicalName off
    servername %1.leopold.net
    VirtualDocumentRoot /Users/martinhein/Sites/%1
   
    SSLEngine on
    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    SSLCertificateFile /Applications/xampp/etc/ssl.crt/server.crt
    SSLCertificateKeyFile /Applications/xampp/etc/ssl.key/server.key
</VirtualHost>

<VirtualHost *:80>
    ServerName localhost
    ServerAlias leopold   
    DocumentRoot "/Applications/xampp/xamppfiles/htdocs"
</VirtualHost>


... irgendetwas finden, was ich dafür für verantwortlich halte.

Hat wer eine Idee ?

danke für Tipps und

beste gruesse,
heinetz
heinetz
 
Posts: 88
Joined: 02. January 2004 12:37

Re: Xampp unter Windows in VMWare

Postby heinetz » 15. January 2009 19:21

Hallo Forum,

ich glaube, ich habe langsam eine Ahnung, aus welcher Richtung das Problem kommt.

Wenn ich:

http://192.168.178.36/~martinhein/

... eingebe, sehe ich den Inhalt des Verzeichnisses:

/Users/martinhein/Sites/

Das ist zwar unter Xampp mein DocRoot. Da aber in der httpd.conf
nirgendwo etwas von ~martinhein steht, denke ich, das hängt mit
dem unter OS X installierten Apachen zusammen. Es scheint, als
würde die Anfrage http://192.168.178.36 garnicht bei meinem
Xampp ankommen.

beste gruesse,
heinetz
heinetz
 
Posts: 88
Joined: 02. January 2004 12:37

Re: Xampp unter Windows in VMWare

Postby heinetz » 15. January 2009 20:04

Hallo Forum,

ich muss mich verbessern. Ich habe die EInstellung:

# User home directories
Include /Applications/xampp/etc/extra/httpd-userdir.conf

in meiner httpd.conf gefunden. Der Apache ist also doch
daran schuld, dass ich mit:

http://192.168.178.36/~martinhein/

... mein Userdr zu Gesicht bekomme. Aber warum geht:

http://192.168.178.36/

... nicht. Unabhängig von Wirt und Gast geht das nicht mal
auf em selben Rechner !

beste gruesse,
heinetz
heinetz
 
Posts: 88
Joined: 02. January 2004 12:37

Re: Xampp unter Windows in VMWare

Postby heinetz » 15. January 2009 20:37

Hallo Forum,

ich habe den Fehler gefunden ... naja eingegrenzt ;)

Er muss in meiner httpd-vhosts.conf liegen:

Code: Select all
NameVirtualHost *:80
NameVirtualHost *:443

<Directory "/Users/martinhein/Sites">
    Options Indexes FollowSymLinks ExecCGI Includes
    AllowOverride All
    Order allow,deny
    Allow from all
</Directory>

<VirtualHost *:80>
    UseCanonicalName off
    servername %1.leopold.net
    VirtualDocumentRoot /Users/martinhein/Sites/%1
</VirtualHost>

<VirtualHost *:443>
    UseCanonicalName off
    servername %1.leopold.net
    VirtualDocumentRoot /Users/martinhein/Sites/%1
   
    SSLEngine on
    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    SSLCertificateFile /Applications/xampp/etc/ssl.crt/server.crt
    SSLCertificateKeyFile /Applications/xampp/etc/ssl.key/server.key
</VirtualHost>

<VirtualHost *:80>
    ServerName localhost
    ServerAlias leopold   
    DocumentRoot "/Applications/xampp/xamppfiles/htdocs"
</VirtualHost>


Und ich muss mich auch wieder mal korrigieren:

127.0.0.1 geht auch nicht ... wohl aus dem selben Grund.

beste gruesse,
heinetz
heinetz
 
Posts: 88
Joined: 02. January 2004 12:37

Re: Xampp unter Windows in VMWare

Postby ralf.krause » 26. January 2009 19:56

Lieber Heinetz,

an den inneren Einstellungen von XAMPP (oder auch MAMP oder den eingebauten Serverfähigkeiten von Mac OS X) brauchst du überhaupt nichts zu ändern.

Das Problem liegt einfach daran, wie die Virtuelle Maschine am Netzwerk hängt. Aus meiner Sicht am einfachsten funktioniert die Lösung deines Problems so, dass du in der Virtuellen Maschine die Netzwerkkarte im Host-Modus bzw. als Hostinterface installierst. In diesem Modus erhält die Virtuelle Maschine vom DHCP-Server eine eigene IP-Adresse aus dem gleichen Netzwerk. Diese Angaben beziehen sich auf alle Virtuellen Maschinen ... VMware, VirtualBox, Parallels oder wie sie sonst noch heißen. Der Modus heißt nur ein bisschen unterschiedlich, wobei sich meine Angaben auf die kostenfrei VirtualBox beziehen.

Um die IP-Adresse herauszufinden, gibt man in WIndows in der Eingabeaufforderung den Befehl ipconfig -all ein und erhält ausführliche Angaben zu den Netzwerkkarten. In Mac OS X und in Linux gibt man im Terminal den Befehl ifconfig ein und erhält eine vergleichbare Übersicht.

Nur wenn die IP-Adressen aus dem gleichen Adressbereich stammen, klappt die Kommunikation mit dem Webserver auf dem anderen System.

Beim Mac habe ich mit der AirPort-Schnittstelle en1 die Adresse 192.168.0.51:
Code: Select all
iMac-20:~ krause$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
   inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
   inet 127.0.0.1 netmask 0xff000000
   inet6 ::1 prefixlen 128
   inet6 fd76:d518:de88:abc0:217:f2ff:fec2:73b8 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
   ether 00:17:f2:c2:73:b8
   media: autoselect status: inactive
   supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
   inet6 fe80::219:e3ff:fe09:901e%en1 prefixlen 64 scopeid 0x5
   inet 192.168.0.51 netmask 0xffffff00 broadcast 192.168.0.255
   ether 00:19:e3:09:90:1e
   media: autoselect status: active
   supported media: autoselect

..... snip ... snap ... gekürzt ... >8 ....


Die dazugehörige Windows-Ausgabe sieht für die Netzwerkkarte der Virtuellen Maschine die Adresse 192.168.0.132::
Code: Select all
C:\ipconfig -all
Windows-IP-Konfiguration

        Hostname. . . . . . . . . . . . . : windows-vm
        Primäres DNS-Suffix . . . . . . . :
        Knotentyp . . . . . . . . . . . . : Unbekannt
        IP-Routing aktiviert. . . . . . . : Nein
        WINS-Proxy aktiviert. . . . . . . : Nein

Ethernetadapter LAN-Verbindung:

        Verbindungsspezifisches DNS-Suffix:
        Beschreibung. . . . . . . . . . . : Ethernetadapter der AMD-PCNET-Familie
        Physikalische Adresse . . . . . . : 08-00-27-84-C9-96
        DHCP aktiviert. . . . . . . . . . : Ja
        Autokonfiguration aktiviert . . . : Ja
        IP-Adresse. . . . . . . . . . . . : 192.168.0.132
        Subnetzmaske. . . . . . . . . . . : 255.255.255.0
        Standardgateway . . . . . . . . . : 192.168.0.1
        DHCP-Server . . . . . . . . . . . : 192.168.0.1
        DNS-Server. . . . . . . . . . . . : 192.168.0.1
        Lease erhalten. . . . . . . . . . : Montag, 26. Januar 2009 19:52:30
        Lease läuft ab. . . . . . . . . . : Donnerstag, 5. Februar 2009 19:52:30
C:\


Einen Webserver in der Virtuellen Maschine rufe ich also mit der Adresse 192.168.0.132 auf und einen Webserver auf Mac OS X mit der Adresse 192.168.0.51 ... im 192-er Netz darf sich nur die letzte Stelle unterscheiden.

Verstanden?

Liebe Grüße
Ralf

Moodle4Mac - http://download.moodle.org/macosx
VirtualBox - http://virtualbox.org
ralf.krause
 
Posts: 26
Joined: 26. January 2009 11:10
Operating System: OS X 10.8.2


Return to XAMPP für macOS

Who is online

Users browsing this forum: No registered users and 6 guests