tried to install peewee on opensuse 13.1

Einfach Dinge, die nichts mit XAMPP, Apache Friends, Apache, MySQL, PHP und alle dem zu tun haben. Allerlei halt. ;)

tried to install peewee on opensuse 13.1

Postby unleash » 08. July 2014 20:10

try to install orm peewee on opensuse 13. 1

but unfortunatly it failed



this was the way i tried to install it:

http://peewee.readthedocs.org/en/latest ... ation.html
http://peewee.readthedocs.org/en/latest ... abase.html


Code: Select all
martin@linux-70ce:~>
martin@linux-70ce:~> git clone https://github.com/coleifer/peewee.git
Klone nach 'peewee'...
remote: Reusing existing pack: 5673, done.
remote: Counting objects: 13, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 5686 (delta 2), reused 0 (delta 0)
Empfange Objekte: 100% (5686/5686), 3.54 MiB | 102.00 KiB/s, done.
Löse Unterschiede auf: 100% (3468/3468), done.
Prüfe Konnektivität... Fertig
martin@linux-70ce:~> cd peewee
martin@linux-70ce:~/peewee> python setup.py install
running install
error: can't create or remove files in install directory

The following error occurred while trying to add or remove files in the
installation directory:

    [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/test-easy-install-5717.write-test'

The installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:

    /usr/lib/python2.7/site-packages/

Perhaps your account does not have write access to this directory?  If the
installation directory is a system-owned directory, you may need to sign in
as the administrator or "root" account.  If you do not have administrative
access to this machine, you may wish to choose a different installation
directory, preferably one that is listed in your PYTHONPATH environment
variable.

For information on other options, you may wish to consult the
documentation at:

  https://pythonhosted.org/setuptools/easy_install.html

Please make the appropriate changes for your system and try again.

martin@linux-70ce:~/peewee>
                                                                                                                                                                                   

                                                         


what can i do now


after installation vof simplejson - it went better - see the following
Code: Select all

Please make the appropriate changes for your system and try again.

martin@linux-70ce:~/peewee> git clone https://github.com/coleifer/peewee.git
Klone nach 'peewee'...                                                                                                                                                             
remote: Reusing existing pack: 5673, done.
remote: Counting objects: 13, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 5686 (delta 2), reused 0 (delta 0)
Empfange Objekte: 100% (5686/5686), 3.54 MiB | 309.00 KiB/s, done.                                                                                                                 
Löse Unterschiede auf: 100% (3468/3468), done.                                                                                                                                     
Prüfe Konnektivität... Fertig                                                                                                                                                       
martin@linux-70ce:~/peewee>                           



guess that now all is fine - i will do some checks
and afterwards i will come back here.
unleash
 
Posts: 141
Joined: 03. December 2011 10:16
Operating System: OpenSuse Linux 12.1

Re: tried to install peewee on opensuse 13.1

Postby unleash » 08. July 2014 22:05

this was the way i tried to install it:

Installing peewee — peewee 2.2.5 documentation
Databases — peewee 2.2.5 documentation


but unfortunatly it failed

Code: Select all
martin@linux-70ce:~>
martin@linux-70ce:~> git clone https://github.com/coleifer/peewee.git
Klone nach 'peewee'...
remote: Reusing existing pack: 5673, done.
remote: Counting objects: 13, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 5686 (delta 2), reused 0 (delta 0)
Empfange Objekte: 100% (5686/5686), 3.54 MiB | 102.00 KiB/s, done.
Löse Unterschiede auf: 100% (3468/3468), done.
Prüfe Konnektivität... Fertig
martin@linux-70ce:~> cd peewee
martin@linux-70ce:~/peewee> python setup.py install
running install
error: can't create or remove files in install directory

The following error occurred while trying to add or remove files in the
installation directory:

    [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/test-easy-install-5717.write-test'

The installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:

    /usr/lib/python2.7/site-packages/

Perhaps your account does not have write access to this directory?  If the
installation directory is a system-owned directory, you may need to sign in
as the administrator or "root" account.  If you do not have administrative
access to this machine, you may wish to choose a different installation
directory, preferably one that is listed in your PYTHONPATH environment
variable.

For information on other options, you may wish to consult the
documentation at:

  https://pythonhosted.org/setuptools/easy_install.html

Please make the appropriate changes for your system and try again.

martin@linux-70ce:~/peewee>
                                                                                                                                                                                   

                                                         


what can i do now


see here after installation vof simplejson - it went better - see the following


Code: Select all
Please make the appropriate changes for your system and try again.

martin@linux-70ce:~/peewee> git clone https://github.com/coleifer/peewee.git
Klone nach 'peewee'...                                                                                                                                                             
remote: Reusing existing pack: 5673, done.
remote: Counting objects: 13, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 5686 (delta 2), reused 0 (delta 0)
Empfange Objekte: 100% (5686/5686), 3.54 MiB | 309.00 KiB/s, done.                                                                                                                 
Löse Unterschiede auf: 100% (3468/3468), done.                                                                                                                                     
Prüfe Konnektivität... Fertig                                                                                                                                                       
martin@linux-70ce:~/peewee>                           



guess that now all is fine - i will do some checks
and afterwards i will come back here.




had issues with installing peewee
Code: Select all
martin@linux-70ce:~>
martin@linux-70ce:~> git clone https://github.com/coleifer/peewee.git
Klone nach 'peewee'...
remote: Reusing existing pack: 5673, done.
remote: Counting objects: 13, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 5686 (delta 2), reused 0 (delta 0)
Empfange Objekte: 100% (5686/5686), 3.54 MiB | 102.00 KiB/s, done.
Löse Unterschiede auf: 100% (3468/3468), done.
Prüfe Konnektivität... Fertig
martin@linux-70ce:~> cd peewee
martin@linux-70ce:~/peewee> python setup.py install
running install
error: can't create or remove files in install directory

The following error occurred while trying to add or remove files in the
installation directory:

    [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/test-easy-install-5717.write-test'

The installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:

    /usr/lib/python2.7/site-packages/

Perhaps your account does not have write access to this directory?  If the
installation directory is a system-owned directory, you may need to sign in
as the administrator or "root" account.  If you do not have administrative
access to this machine, you may wish to choose a different installation
directory, preferably one that is listed in your PYTHONPATH environment
variable.

For information on other options, you may wish to consult the
documentation at:

  https://pythonhosted.org/setuptools/easy_install.html
Please make the appropriate changes for your system and try again.
martin@linux-70ce:~/peewee>
                     



afer that - as written above - i installed simplejson and then i tried to install peewee again
now i guess i had more luck....

Code: Select all
                                                                                                                                                                         

martin@linux-70ce:~/peewee> git clone https://github.com/coleifer/peewee.git
Klone nach 'peewee'...                                                                                                                                                             
remote: Reusing existing pack: 5673, done.
remote: Counting objects: 13, done.
remote: Compressing objects: 100% (13/13), done.
remote: Total 5686 (delta 2), reused 0 (delta 0)
Empfange Objekte: 100% (5686/5686), 3.54 MiB | 309.00 KiB/s, done.                                                                                                                 
Löse Unterschiede auf: 100% (3468/3468), done.                                                                                                                                     
Prüfe Konnektivität... Fertig                                                                                                                                                       
martin@linux-70ce:~/peewee>                           



SEE THE FULL CODE - THAT I AM RUNNING
Code: Select all

import urllib
import urlparse
import re
from peewee import *
import json

db = MySQLDatabase('cpan', user='root',passwd='rimbaud')

class User(Model):
    name = TextField()
    cname = TextField()
    email = TextField()
    url = TextField()

    class Meta:
        database = db # this model uses the cpan database

       
User.create_table() #ensure table is created


url = "http://search.cpan.org/author/?W"
html = urllib.urlopen(url).read()
for lk, capname, name in re.findall('<a href="(/~.*?/)"><b>(.*?)</b></a><br/><small>(.*?)</small>', html):
    alk = urlparse.urljoin(url, lk)

    data = { 'url':alk, 'name':name, 'cname':capname }

    phtml = urllib.urlopen(alk).read()
    memail = re.search('<a href="mailto:(.*?)">', phtml)
    if memail:
        data['email'] = memail.group(1)
       

data = json.load() #your json data file here

for entry in data: #assuming your data is an array of JSON objects
    user = User.create(name=entry["name"], cname=entry["cname"],
        email=entry["email"], url=entry["url"])
    user.save()
   



and the subsequently results:

Code: Select all
martin@linux-70ce:~/perl> python cpan6.py
python: can't open file 'cpan6.py': [Errno 2] No such file or directory
martin@linux-70ce:~/perl> python cpan5.py
Traceback (most recent call last):
  File "cpan5.py", line 7, in <module>
    from peewee import *
ImportError: No module named peewee
martin@linux-70ce:~/perl>
unleash
 
Posts: 141
Joined: 03. December 2011 10:16
Operating System: OpenSuse Linux 12.1


Return to Allerlei

Who is online

Users browsing this forum: No registered users and 1 guest