mysql service don't start in xampp

Problems with the Windows version of XAMPP, questions, comments, and anything related.

mysql service don't start in xampp

Postby jose.sreis » 12. February 2019 13:40

I'm having the same issue.
I didn't find anything in Windows Event Service's logs. I tried to change mysql port from 3306 to 33061 but it didn't helped. The logs even say that its trying to use 3306 still!
Thanks in advance!
The following are some debug info.

--- BEGIN OF XAMPP Control Panel v3.2.2 window log ---
10:36:24 [main] Initializing Control Panel
10:36:24 [main] Windows Version: Enterprise 64-bit
10:36:24 [main] XAMPP Version: 7.3.1
10:36:24 [main] Control Panel Version: 3.2.2 [ Compiled: Nov 12th 2015 ]
10:36:24 [main] Running with Administrator rights - good!
10:36:24 [main] XAMPP Installation Directory: "c:\xampp\"
10:36:24 [main] Checking for prerequisites
10:36:24 [main] All prerequisites found
10:36:24 [main] Initializing Modules
10:36:24 [Apache] XAMPP Apache is already running on port 80
10:36:24 [Apache] XAMPP Apache is already running on port 443
10:36:24 [main] Starting Check-Timer
10:36:24 [main] Control Panel Ready
10:36:33 [mysql] Attempting to start MySQL app...
10:36:33 [mysql] Status change detected: running
10:36:34 [mysql] Status change detected: stopped
10:36:34 [mysql] Error: MySQL shutdown unexpectedly.
10:36:34 [mysql] This may be due to a blocked port, missing dependencies,
10:36:34 [mysql] improper privileges, a crash, or a shutdown by another method.
10:36:34 [mysql] Press the Logs button to view error logs and check
10:36:34 [mysql] the Windows Event Viewer for more clues
10:36:34 [mysql] If you need more help, copy and post this
10:36:34 [mysql] entire log window on the forums
--- END of XAMPP Control Panel v3.2.2 window log ---

--- BEGIN of mysql_error.log file log ---
2015-11-10 15:26:56 10fc InnoDB: Warning: Using innodb_additional_mem_pool_size is DEPRECATED. This option may be removed in future releases, together with the option innodb_use_sys_malloc and with the InnoDB's internal memory allocator.
2015-11-10 15:26:56 4348 [Note] InnoDB: Using mutexes to ref count buffer pool pages
2015-11-10 15:26:56 4348 [Note] InnoDB: The InnoDB memory heap is disabled
2015-11-10 15:26:56 4348 [Note] InnoDB: Mutexes and rw_locks use Windows interlocked functions
2015-11-10 15:26:56 4348 [Note] InnoDB: Memory barrier is not used
2015-11-10 15:26:56 4348 [Note] InnoDB: Compressed tables use zlib 1.2.3
2015-11-10 15:26:56 4348 [Note] InnoDB: Not using CPU crc32 instructions
2015-11-10 15:26:56 4348 [Note] InnoDB: Initializing buffer pool, size = 16.0M
2015-11-10 15:26:56 4348 [Note] InnoDB: Completed initialization of buffer pool
2015-11-10 15:26:56 4348 [Note] InnoDB: Highest supported file format is Barracuda.
2015-11-10 15:26:57 4348 [Note] InnoDB: 128 rollback segment(s) are active.
2015-11-10 15:26:57 4348 [Note] InnoDB: Waiting for purge to start
2015-11-10 15:26:57 4348 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.26-74.0 started; log sequence number 1835027
2015-11-10 15:26:57 6140 [Note] InnoDB: Dumping buffer pool(s) not yet started
2015-11-10 15:26:57 4348 [Note] Plugin 'FEEDBACK' is disabled.
2015-11-10 15:26:57 4348 [Note] Server socket created on IP: '::'.
2015-11-10 15:26:57 4348 [Note] Event Scheduler: Loaded 0 events
2015-11-10 15:26:57 4348 [Note] C:\xampp\mysql\bin\mysqld.exe: ready for connections.
Version: '10.1.8-MariaDB' socket: '' port: 3306 mariadb.org binary distribution
2015-11-10 15:27:11 5152 [Note] C:\xampp\mysql\bin\mysqld.exe: Normal shutdown

2015-11-10 15:27:11 5152 [Note] Event Scheduler: Purging the queue. 0 events
2015-11-10 15:27:11 5732 [Note] InnoDB: FTS optimize thread exiting.
2015-11-10 15:27:11 5152 [Note] InnoDB: Starting shutdown...
2015-11-10 15:27:13 5152 [Note] InnoDB: Shutdown completed; log sequence number 1835037
2015-11-10 15:27:13 5152 [Note] C:\xampp\mysql\bin\mysqld.exe: Shutdown complete
--- END of mysql_error.log file log ---

--- BEGIN of my.ini MYSQL's configuration file ---
# Example MySQL config file for small systems.
#
# This is for a system with little memory (<= 64M) where MySQL is only used
# from time to time and it's important that the mysqld daemon
# doesn't use much resources.
#
# You can copy this file to
# C:/xampp/mysql/bin/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:/xampp/mysql/data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
# password = your_password
port = 33061
socket = "C:/xampp/mysql/mysql.sock"


# Here follows entries for some specific programs

# The MySQL server
[mysqld]
port= 33061
socket = "C:/xampp/mysql/mysql.sock"
basedir = "C:/xampp/mysql"
tmpdir = "C:/xampp/tmp"
datadir = "C:/xampp/mysql/data"
pid_file = "mysql.pid"
# enable-named-pipe
key_buffer = 16M
max_allowed_packet = 1M
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
log_error = "mysql_error.log"

# Change here for bind listening
# bind-address="127.0.0.1"
# bind-address = ::1 # for ipv6

# Where do all the plugins live
plugin_dir = "C:/xampp/mysql/lib/plugin/"

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
# commented in by lampp security
#skip-networking
#skip-federated

# Replication Master Server (default)
# binary logging is required for replication
# log-bin deactivated by default since XAMPP 1.4.11
#log-bin=mysql-bin

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin


# Point the following paths to different dedicated disks
#tmpdir = "C:/xampp/tmp"
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000

# Comment the following if you are using InnoDB tables
#skip-innodb
innodb_data_home_dir = "C:/xampp/mysql/data"
innodb_data_file_path = ibdata1:10M:autoextend
innodb_log_group_home_dir = "C:/xampp/mysql/data"
#innodb_log_arch_dir = "C:/xampp/mysql/data"
## You can set .._buffer_pool_size up to 50 - 80 %
## of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 16M
innodb_additional_mem_pool_size = 2M
## Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 5M
innodb_log_buffer_size = 8M
innodb_flush_log_at_trx_commit = 1
innodb_lock_wait_timeout = 50

## UTF 8 Settings
#init-connect=\'SET NAMES utf8\'
#collation_server=utf8_unicode_ci
#character_set_server=utf8
#skip-character-set-client-handshake
#character_sets-dir="C:/xampp/mysql/share/charsets"

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout
--- END of my.ini MYSQL's configuration file ---
jose.sreis
 
Posts: 2
Joined: 12. February 2019 13:06
XAMPP version: 7.3.1
Operating System: Windows 10

Re: mysql service don't start in xampp

Postby jose.sreis » 12. February 2019 19:42

Just noticed that mysql_error.log file was not being updated.
When I start mysql server from command line, mysqld.exe, it all goes fine and even XAMPP Control Panel detects it! Just not working the mysql server start command from the XAMPP Control Panel.
jose.sreis
 
Posts: 2
Joined: 12. February 2019 13:06
XAMPP version: 7.3.1
Operating System: Windows 10

Re: mysql service don't start in xampp

Postby dCart » 14. February 2019 16:50

It may not be very professional, but when xampp doesn't work after installation I install it again. I always turn off skype and other programs connecting to the Internet.
In most cases it helps me :)
dCart
 
Posts: 8
Joined: 08. February 2019 12:27
Location: Poland
XAMPP version: 3.2.2
Operating System: Windows 10


Return to XAMPP for Windows

Who is online

Users browsing this forum: No registered users and 58 guests