installing xampp on a router and a modem

[hafiz waziri]

Hi guys
Yesterdy i finished my website and tried to make online and publicly available I have a linksys e1000 v2.1 router and a d-link dsl 2520u modem. now when i was setting my static ip i used the following configuration:
ip address:192.168.2.15
subnet mask: default
default gateway:192.168.2.6(my routers default gateway)
now i went to port forwarding(i use dd-wrt firmware) i port forwarded port 80,443,21 in ip 192.168.2.15
now when i opened my private ip my website loaded successfully now when i used my
public ip it showed my modems configuration pages now in my modem i port forwarder 192.168.2.15 too to the same port but didnt work either
I need support immediately.
and also i use non official xampp v:3.2.1

[Nobbie]

I need support immediately.

Then you should ask earlier.

now when i opened my private ip my website loaded successfully now when i used my
public ip it showed my modems configuration pages now in my modem i port forwarder 192.168.2.15 too to the same port but didnt work either

Some routers do NOT forward to internal LAN, when the request already is coming from internal LAN. For test reason, try to reach the server from any device outside (another pc at a friend, or a smartphone not using WLAN or similar), which is not inside the LAN.

Maybe you will find an option inside the router to switch off the external configuration menu. This depends on your router (i dont know your router, i use a fritz box).

Finally, there is no "Xampp v3.2.1". The Xampp is complete different (i.e. 1.8.3-3 or similar), the v3.2.1 is the release of the control box, not the xampp software collection.

[hafiz waziri]

This depends on your router (i dont know your router, i use a fritz box)

My router is linksys E1000 v2.1 on dd-wrt firmware

[Nobbie]

My router is linksys E1000 v2.1 on dd-wrt firmware

Yes, but i dont know this one. Look into the manual if you are looking for configuration options.