My XAMPP 1.8.3 will not start; install services
Posted: 04. October 2013 22:13I uninstalled a prior version of XAMPP and when I try to run Apache I get this error:
1:51:37 PM [main] Initializing Control Panel
1:51:37 PM [main] Windows Version: Windows 8 Pro 64-bit
1:51:37 PM [main] XAMPP Version: 1.8.3
1:51:37 PM [main] Control Panel Version: 3.2.1 [ Compiled: May 7th 2013 ]
1:51:37 PM [main] You are not running with administrator rights! This will work for
1:51:37 PM [main] most application stuff but whenever you do something with services
1:51:37 PM [main] there will be a security dialogue or things will break! So think
1:51:37 PM [main] about running this application with administrator rights!
1:51:37 PM [main] XAMPP Installation Directory: "c:\xampp\"
1:51:37 PM [main] Checking for prerequisites
1:51:51 PM [main] All prerequisites found
1:51:51 PM [main] Initializing Modules
1:51:51 PM [Apache] Problem detected!
1:51:51 PM [Apache] Port 80 in use by "Unable to open process" with PID 36!
1:51:51 PM [Apache] Apache WILL NOT start without the configured ports free!
1:51:51 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
1:51:51 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
1:51:51 PM [Apache] Problem detected!
1:51:51 PM [Apache] Port 443 in use by "Unable to open process" with PID 36!
1:51:51 PM [Apache] Apache WILL NOT start without the configured ports free!
1:51:51 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
1:51:51 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
1:51:51 PM [main] Starting Check-Timer
1:51:51 PM [main] Control Panel Ready
2:00:41 PM [Apache] Problem detected!
2:00:41 PM [Apache] Port 80 in use by "Unable to open process" with PID 36!
2:00:41 PM [Apache] Apache WILL NOT start without the configured ports free!
2:00:41 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
2:00:41 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
2:00:41 PM [Apache] Problem detected!
2:00:41 PM [Apache] Port 443 in use by "Unable to open process" with PID 36!
2:00:41 PM [Apache] Apache WILL NOT start without the configured ports free!
2:00:41 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
2:00:41 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
2:00:41 PM [Apache] Attempting to start Apache app...
2:00:41 PM [Apache] Status change detected: running
2:00:42 PM [Apache] Status change detected: stopped
2:00:42 PM [Apache] Error: Apache shutdown unexpectedly.
2:00:42 PM [Apache] This may be due to a blocked port, missing dependencies,
2:00:42 PM [Apache] improper privileges, a crash, or a shutdown by another method.
2:00:42 PM [Apache] Press the Logs button to view error logs and check
2:00:42 PM [Apache] the Windows Event Viewer for more clues
2:00:42 PM [Apache] If you need more help, copy and post this
2:00:42 PM [Apache] entire log window on the forums
2:01:49 PM [Apache] Problem detected!
2:01:49 PM [Apache] Port 80 in use by "Unable to open process" with PID 36!
2:01:49 PM [Apache] Apache WILL NOT start without the configured ports free!
2:01:49 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
2:01:49 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
2:01:49 PM [Apache] Problem detected!
2:01:49 PM [Apache] Port 443 in use by "Unable to open process" with PID 36!
2:01:49 PM [Apache] Apache WILL NOT start without the configured ports free!
2:01:49 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
2:01:49 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
2:01:49 PM [Apache] Attempting to start Apache app...
2:01:49 PM [Apache] Status change detected: running
2:01:50 PM [Apache] Status change detected: stopped
2:01:50 PM [Apache] Error: Apache shutdown unexpectedly.
2:01:50 PM [Apache] This may be due to a blocked port, missing dependencies,
2:01:50 PM [Apache] improper privileges, a crash, or a shutdown by another method.
2:01:50 PM [Apache] Press the Logs button to view error logs and check
2:01:50 PM [Apache] the Windows Event Viewer for more clues
2:01:50 PM [Apache] If you need more help, copy and post this
2:01:50 PM [Apache] entire log window on the forums
2:05:49 PM [main] Executing "services.msc"
No doubt I need to clean something up from the prior version.
Suggestions would be appreciated...
Todd
1:51:37 PM [main] Initializing Control Panel
1:51:37 PM [main] Windows Version: Windows 8 Pro 64-bit
1:51:37 PM [main] XAMPP Version: 1.8.3
1:51:37 PM [main] Control Panel Version: 3.2.1 [ Compiled: May 7th 2013 ]
1:51:37 PM [main] You are not running with administrator rights! This will work for
1:51:37 PM [main] most application stuff but whenever you do something with services
1:51:37 PM [main] there will be a security dialogue or things will break! So think
1:51:37 PM [main] about running this application with administrator rights!
1:51:37 PM [main] XAMPP Installation Directory: "c:\xampp\"
1:51:37 PM [main] Checking for prerequisites
1:51:51 PM [main] All prerequisites found
1:51:51 PM [main] Initializing Modules
1:51:51 PM [Apache] Problem detected!
1:51:51 PM [Apache] Port 80 in use by "Unable to open process" with PID 36!
1:51:51 PM [Apache] Apache WILL NOT start without the configured ports free!
1:51:51 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
1:51:51 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
1:51:51 PM [Apache] Problem detected!
1:51:51 PM [Apache] Port 443 in use by "Unable to open process" with PID 36!
1:51:51 PM [Apache] Apache WILL NOT start without the configured ports free!
1:51:51 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
1:51:51 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
1:51:51 PM [main] Starting Check-Timer
1:51:51 PM [main] Control Panel Ready
2:00:41 PM [Apache] Problem detected!
2:00:41 PM [Apache] Port 80 in use by "Unable to open process" with PID 36!
2:00:41 PM [Apache] Apache WILL NOT start without the configured ports free!
2:00:41 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
2:00:41 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
2:00:41 PM [Apache] Problem detected!
2:00:41 PM [Apache] Port 443 in use by "Unable to open process" with PID 36!
2:00:41 PM [Apache] Apache WILL NOT start without the configured ports free!
2:00:41 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
2:00:41 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
2:00:41 PM [Apache] Attempting to start Apache app...
2:00:41 PM [Apache] Status change detected: running
2:00:42 PM [Apache] Status change detected: stopped
2:00:42 PM [Apache] Error: Apache shutdown unexpectedly.
2:00:42 PM [Apache] This may be due to a blocked port, missing dependencies,
2:00:42 PM [Apache] improper privileges, a crash, or a shutdown by another method.
2:00:42 PM [Apache] Press the Logs button to view error logs and check
2:00:42 PM [Apache] the Windows Event Viewer for more clues
2:00:42 PM [Apache] If you need more help, copy and post this
2:00:42 PM [Apache] entire log window on the forums
2:01:49 PM [Apache] Problem detected!
2:01:49 PM [Apache] Port 80 in use by "Unable to open process" with PID 36!
2:01:49 PM [Apache] Apache WILL NOT start without the configured ports free!
2:01:49 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
2:01:49 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
2:01:49 PM [Apache] Problem detected!
2:01:49 PM [Apache] Port 443 in use by "Unable to open process" with PID 36!
2:01:49 PM [Apache] Apache WILL NOT start without the configured ports free!
2:01:49 PM [Apache] You need to uninstall/disable/reconfigure the blocking application
2:01:49 PM [Apache] or reconfigure Apache and the Control Panel to listen on a different port
2:01:49 PM [Apache] Attempting to start Apache app...
2:01:49 PM [Apache] Status change detected: running
2:01:50 PM [Apache] Status change detected: stopped
2:01:50 PM [Apache] Error: Apache shutdown unexpectedly.
2:01:50 PM [Apache] This may be due to a blocked port, missing dependencies,
2:01:50 PM [Apache] improper privileges, a crash, or a shutdown by another method.
2:01:50 PM [Apache] Press the Logs button to view error logs and check
2:01:50 PM [Apache] the Windows Event Viewer for more clues
2:01:50 PM [Apache] If you need more help, copy and post this
2:01:50 PM [Apache] entire log window on the forums
2:05:49 PM [main] Executing "services.msc"
No doubt I need to clean something up from the prior version.
Suggestions would be appreciated...
Todd
. Do I just change the permissions on the XAMPP directory as I would in Linux?