Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl

Problems with the Windows version of XAMPP, questions, comments, and anything related.

Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl

Postby Tremal Naik » 27. August 2009 11:33

Hi!

I've read another threads about this problem, but I've can't resolve my problem with the solutions proposed it.

I've installed XAMPP 1.7.2 on a Windos XP Professional. I tried twice ways for installation: the EXE and the ZIP, but always I obtain the same lines at the error.log from Apache:

Code: Select all
[Thu Aug 27 10:24:59 2009] [error] Attempt to reload DynaLoader.pm aborted.\nCompilation failed in require at C:/xampp/perl/site/lib/ModPerl/Const.pm line 18.\nBEGIN failed--compilation aborted at C:/xampp/perl/site/lib/ModPerl/Const.pm line 18.\nCompilation failed in require at C:/xampp/perl/site/lib/Apache2/Const.pm line 18.\nBEGIN failed--compilation aborted at C:/xampp/perl/site/lib/Apache2/Const.pm line 18.\nCompilation failed in require at C:/xampp/apache/conf/extra/startup.pl line 9.\nBEGIN failed--compilation aborted at C:/xampp/apache/conf/extra/startup.pl line 9.\nCompilation failed in require at (eval 2) line 1.\n
[Thu Aug 27 10:24:59 2009] [error] Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl for server localhost:80, exiting...


The error is repeated several times at the same file.

I have installed the oracle 10.2, but I0ve revised the ENVIROMENT VARIABLES, the scripts startup.pl and the httpd.conf and perl.conf.

I put here the code.

httpd.conf
Code: Select all
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/xampp/apache" will be interpreted by the
# server as "C:/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 0.0.0.0:80
#Listen [::]:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
##LoadModule autoindex_module modules/mod_autoindex.so # replaced with autoindex_color_module
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule case_filter_module modules/mod_case_filter.so
#LoadModule case_filter_in_module modules/mod_case_filter_in.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
LoadModule env_module modules/mod_env.so
#LoadModule example_module modules/mod_example.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#
# 3rd party modules
#
LoadModule autoindex_color_module modules/mod_autoindex_color.so

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin postmaster@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#ScriptLog "logs/cgi.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock "logs/cgi.sock"
</IfModule>

#
# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/xampp/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig "conf/mime.types"

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl .asp

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile "conf/magic"
</IfModule>

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# XAMPP specific settings
Include "conf/extra/httpd-xampp.conf"

# Perl settings
Include "conf/extra/perl.conf"

# Server-pool management (MPM specific)
Include "conf/extra/httpd-mpm.conf"

# Multi-language error messages
Include "conf/extra/httpd-multilang-errordoc.conf"

# Fancy directory listings
Include "conf/extra/httpd-autoindex.conf"

# Language settings
Include "conf/extra/httpd-languages.conf"

# User home directories
Include "conf/extra/httpd-userdir.conf"

# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"

# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"

# Distributed authoring and versioning (WebDAV)
Include "conf/extra/httpd-dav.conf"

# Implements a proxy/gateway for Apache.
Include "conf/extra/httpd-proxy.conf"

# Various default settings
Include "conf/extra/httpd-default.conf"

# Secure (SSL/TLS) connections
Include "conf/extra/httpd-ssl.conf"
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    SSLSessionCache "shmcb:logs/ssl.scache(512000)"
    SSLSessionCacheTimeout 300
</IfModule>



perl.conf
Code: Select all
LoadFile "C:/xampp/perl/bin/perl510.dll"
LoadModule perl_module modules/mod_perl.so
PerlPostConfigRequire "C:/xampp/apache/conf/extra/startup.pl"

<IfModule mime_module>
    AddType text/html .pl
</IfModule>

<FilesMatch "\.pl$">
    SetHandler perl-script
    PerlResponseHandler ModPerl::Registry
    PerlOptions +ParseHeaders
</FilesMatch>

<Directory "C:/xampp/cgi-bin">
    <FilesMatch "\.pl$">
        SetHandler cgi-script
    </FilesMatch>
</Directory>

# ASP settings
Include "conf/extra/asp.conf"


startup.pl
Code: Select all
use ModPerl::Util ();
use Apache2::RequestRec ();
use Apache2::RequestIO ();
use Apache2::RequestUtil ();
use Apache2::ServerRec ();
use Apache2::ServerUtil ();
use Apache2::Connection ();
use Apache2::Log ();
use Apache2::Const -compile => ':common';
use APR::Const -compile => ':common';
use APR::Table ();
use Apache2::compat ();
use ModPerl::Registry ();
use CGI ();
use Apache::ASP ();
1;


Thanks!
Tremal Naik
 
Posts: 8
Joined: 27. August 2009 09:18

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl

Postby Nobbie » 27. August 2009 12:26

Nobbie
 
Posts: 6491
Joined: 09. March 2008 13:04

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl

Postby Tremal Naik » 27. August 2009 12:41

Hi Nobbie,

Thanks for your answer, but I believe I don't understand the sentence

Editing apache_start.bat to unset PERL5LIB which was defined supprisingly enough by Oracle 10. I then had to use that batch file to start/stop apache.


If my apache_start.bat is like this one:

Code: Select all
@ECHO OFF & SETLOCAL
PUSHD %~dp0

ECHO Now we start Apache
xampp_cli.exe start apache

POPD
PAUSE


What must I modify? The PERL5LIB system variable is exactly the same that says the post. Thanks!
Tremal Naik
 
Posts: 8
Joined: 27. August 2009 09:18

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl

Postby Nobbie » 27. August 2009 13:35

Tremal Naik wrote:What must I modify? The PERL5LIB system variable is exactly the same that says the post. Thanks!


Obviously Oracle did not change your apache_startup.bat (as mentioned in the link), but instead it inserts the environment variable PERL5LIB into your Windows Environment.

The problem is, that this setting collides with the Xampp Perl Addon, because Oracle comes with it's own Perl (or Perl-Libraries). Try to delete the PER5LIB Variable from the Environment (you should backup the value before!), or simply rename it to something else, then reboot your PC and start Xampp again.
Nobbie
 
Posts: 6491
Joined: 09. March 2008 13:04

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl

Postby Wiedmann » 27. August 2009 14:27

Code: Select all
LoadFile "C:/xampp/perl/bin/perl510.dll"
LoadModule perl_module modules/mod_perl.so
PerlPostConfigRequire "C:/xampp/apache/conf/extra/startup.pl"


You can change this to:
Code: Select all
LoadFile "C:/xampp/perl/bin/perl510.dll"
LoadModule perl_module modules/mod_perl.so
PerlSwitches -T
PerlPostConfigRequire "C:/xampp/apache/conf/extra/startup.pl"
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl

Postby goldman » 21. September 2009 06:05

Wiedmann,

Thanks for your suggestion. This actually has my apache running. Out of curiosity what does PerlSwitches -T do??
goldman
 
Posts: 1
Joined: 21. September 2009 05:57

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl

Postby Izzy » 21. September 2009 07:29

goldman wrote:Out of curiosity what does PerlSwitches -T do??
This starts perl.exe with the -T switch which enables tainting checks.

To find all the perl switches and their explanations for each in XAMPP 1.7.2, open your XAMPP Control Panel and click on the button Shell.

Then type perl -help

For older XAMPP versions with the plugin installed open a command prompt in the C:\xampp\perl\bin folder and type the above command.
Izzy
 
Posts: 3344
Joined: 25. April 2006 17:06

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup

Postby SUNILP » 28. August 2012 06:39

I had same problem....
But I able to solve it by
Commenting below line in the file
C:\xampp\apache\conf\extra\httpd-perl.conf

#[/b]PerlPostConfigRequire "C:/xampp/apache/conf/extra/startup.pl"
SUNILP
 
Posts: 1
Joined: 28. August 2012 06:33
XAMPP Version: 5.5.19
Operating System: window

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup

Postby nandasasmita » 15. November 2012 02:58

work like charm for me,, :D i am just looking for this solution on all other forum and find nothing
nandasasmita
 
Posts: 1
Joined: 15. November 2012 02:52
XAMPP Version: 5.6.3
Operating System: windows 7 ultimate

Re: Can't load Perl file: C:/xampp/apache/conf/extra/startup

Postby drzfruit » 03. April 2013 13:18

Tremal Naik wrote:
What must I modify? The PERL5LIB system variable is exactly the same that says the post. Thanks!


Obviously Oracle did not change your apache_startup.bat (as mentioned in the link), but instead it inserts the environment variable PERL5LIB into your Windows Environment.

The problem is, that this setting collides with the Xampp Perl Addon, because Oracle comes with it's own Perl (or Perl-Libraries). Try to delete the PER5LIB Variable from the Environment (you should backup the value before!), or simply rename it to something else, then reboot your PC and start Xampp again.


It is true that httpd complicated with oracle db. I had deinstall the oracle database, and httpd works fine. :D

Take look my error.log below.

Code: Select all
[Wed Apr 03 19:03:58 2013] [error] Attempt to reload DynaLoader.pm aborted.\nCompilation failed in require at D:/xampp/perl/site/lib/ModPerl/Const.pm line 18.\nBEGIN failed--compilation aborted at D:/xampp/perl/site/lib/ModPerl/Const.pm line 18.\nCompilation failed in require at D:/xampp/perl/site/lib/Apache2/Const.pm line 18.\nBEGIN failed--compilation aborted at D:/xampp/perl/site/lib/Apache2/Const.pm line 18.\nCompilation failed in require at D:/xampp/apache/conf/extra/startup.pl line 9.\nBEGIN failed--compilation aborted at D:/xampp/apache/conf/extra/startup.pl line 9.\nCompilation failed in require at (eval 2) line 1.\n
[Wed Apr 03 19:03:58 2013] [error] Can't load Perl file: D:/xampp/apache/conf/extra/startup.pl for server localhost:80, exiting...
[Wed Apr 03 19:08:01 2013] [error] Attempt to reload DynaLoader.pm aborted.\nCompilation failed in require at D:/xampp/perl/site/lib/ModPerl/Const.pm line 18.\nBEGIN failed--compilation aborted at D:/xampp/perl/site/lib/ModPerl/Const.pm line 18.\nCompilation failed in require at D:/xampp/perl/site/lib/Apache2/Const.pm line 18.\nBEGIN failed--compilation aborted at D:/xampp/perl/site/lib/Apache2/Const.pm line 18.\nCompilation failed in require at D:/xampp/apache/conf/extra/startup.pl line 9.\nBEGIN failed--compilation aborted at D:/xampp/apache/conf/extra/startup.pl line 9.\nCompilation failed in require at (eval 2) line 1.\n
[Wed Apr 03 19:08:01 2013] [error] Can't load Perl file: D:/xampp/apache/conf/extra/startup.pl for server localhost:80, exiting...
[Wed Apr 03 19:11:46 2013] [notice] Digest: generating secret for digest authentication ...
[Wed Apr 03 19:11:46 2013] [notice] Digest: done
[Wed Apr 03 19:11:49 2013] [notice] Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/1.0.0e PHP/5.3.8 mod_perl/2.0.4 Perl/v5.10.1 configured -- resuming normal operations
[Wed Apr 03 19:11:49 2013] [notice] Server built: Sep 10 2011 11:34:11
[Wed Apr 03 19:11:49 2013] [notice] Parent: Created child process 2092
[Wed Apr 03 19:11:50 2013] [notice] Digest: generating secret for digest authentication ...
[Wed Apr 03 19:11:50 2013] [notice] Digest: done
[Wed Apr 03 19:11:52 2013] [notice] Child 2092: Child process is running
[Wed Apr 03 19:11:52 2013] [notice] Child 2092: Acquired the start mutex.
[Wed Apr 03 19:11:52 2013] [notice] Child 2092: Starting 150 worker threads.
[Wed Apr 03 19:11:52 2013] [notice] Child 2092: Starting thread to listen on port 443.
[Wed Apr 03 19:11:52 2013] [notice] Child 2092: Starting thread to listen on port 80.
[Wed Apr 03 19:11:52 2013] [notice] Child 2092: Starting thread to listen on port 80.
[Wed Apr 03 19:11:52 2013] [notice] Child 2092: Starting thread to listen on port 443.
drzfruit
 
Posts: 1
Joined: 03. April 2013 13:12
XAMPP Version: 5.5.19
Operating System: windows XP, min 12, windows 8


Return to XAMPP for Windows

Who is online

Users browsing this forum: No registered users and 74 guests