Another httpd.conf File

Problems with the Windows version of XAMPP, questions, comments, and anything related.

Another httpd.conf File

Postby geekmaster » 13. December 2007 14:16

I'm VERY new to this.
I really need help.
My domain name is 347media.com.

Can someone please edit my httpd.conf file to have the sub-domain mail.347media.com and main domain 347media.com?

Please.
Thanks in advance.
Code: Select all
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:/server/apache" will be interpreted by the
# server as "D:/server/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild  0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "D:/server/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule autoindex_module modules/mod_autoindex.so # don't load because of mod_autoindex_color.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule ssl_module modules/mod_ssl.so

LoadModule autoindex_color_module modules/mod_autoindex_color.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_remote_module modules/mod_auth_remote.so
#LoadModule sspi_auth_module modules/mod_auth_sspi.so
#LoadModule log_sql_module modules/mod_log_sql.so
#LoadModule log_sql_mysql_module modules/mod_log_sql_mysql.so
#<IfModule ssl_module>
#    LoadModule log_sql_ssl_module modules/mod_log_sql_ssl.so
#</IfModule>
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule xmlns_module modules/mod_xmlns.so
#LoadModule proxy_xml_module modules/mod_proxy_xml.so
#LoadModule bw_module modules/mod_bw.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "D:/server/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "D:/server/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI
   
    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl index.html index.htm index.shtml index.phtml
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access.log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access.log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "D:/server/cgi-bin/"

</IfModule>

#
# "D:/server/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "D:/server/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script.  For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:

   #!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file.  Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention.  The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
#

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi

    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis

    # For server-parsed imagemap files:
    #AddHandler imap-file map

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
   AddType text/html .shtml
   AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
EnableMMAP off
EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# XAMPP specific settings
Include conf/extra/httpd-xampp.conf

# Server-pool management (MPM specific)
# Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf

#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
[/code]
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby geekmaster » 13. December 2007 23:04

Or maybe you can give me a couple lines of code if you don't want to edit the thing for me? :/
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby Izzy » 13. December 2007 23:53

From what I can see on the Internet you have your main domain 347media.com working already and going to an XAMPP Apache server at IP 69.112.68.55.

It would be best practice to leave the httpd.conf file at the defaults that were set when you installed XAMPP.

The Apache configuration file that is designed just for this purpose is:
xampp\apache\conf\extra\httpd-vhosts.conf

This recent post might give you some clues as a 'how-to', then post back if you get stuck, or what you try gives you errors, again with as much detail as your first post.
http://community.apachefriends.org/f/viewtopi ... 743#111743


BTW - When you have the 2 domains, localhost and your main domain 347media.com working, then it would be time to sort out your sub-domain and the reasons or what you have in mind for this sub-domain, as there are at least a couple of scenarios that would relate to the mail.347media.com sub domain and both are handled quite differently.

Also to get these working from the Internet you have to configure your DNS and nameservers at your domain name registrar - GoDaddy, which you also appear to have done already.


===========================================
1. The new DeskTopXampp Launch Control for XAMPP / XAMPPlite
Posted by Ridgewood available from Ridgewood'sDTX web site

2. Build Rich AJAX Applications - Faster
TIBCO General Interface Pro Edition but FREE and Open Source
Fully working with NO donations required to get a user/password
===========================================
Izzy
 
Posts: 3344
Joined: 25. April 2006 17:06

Postby geekmaster » 14. December 2007 03:58

So what I have is
Code: Select all
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
##NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
##<VirtualHost *:80>
##    webmaster webmaster@dummy-host.example.com
##    DocumentRoot /www/docs/dummy-host.example.com
##    ServerName dummy-host.example.com
##    ServerAlias www.dummy-host.example.com
##    ErrorLog @rel_logfiledir@/dummy-host.example.com-error_log
##    CustomLog @rel_logfiledir@/dummy-host.example.com-access_log common
##</VirtualHost>

##<VirtualHost *:80>
##    webmaster webmaster@dummy-host2.example.com
##    DocumentRoot /www/docs/dummy-host2.example.com
##    ServerName dummy-host2.example.com
##    ErrorLog @rel_logfiledir@/dummy-host2.example.com-error_log
##    CustomLog @rel_logfiledir@/dummy-host2.example.com-access_log common
##</VirtualHost>
NameVirtualHost *:80

<VirtualHost *:80>
ServerName localhost
DocumentRoot "D:/server/htdocs"
<Directory "D:/server/htdocs">
Options Indexes FollowSymLinks Includes ExecCGI
Order allow,deny
Allow from all
</Directory>
</VirtualHost>

<VirtualHost *:80>
ServerName 347media.com
ServerAlias www.347media.com
webmaster webmaster@347media.com
DocumentRoot "D:/server/htdocs"
<Directory "D:/server/htdocs" >
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
CustomLog logs/347media.access.log combined
ErrorLog logs/347media.error.log
</VirtualHost>

<VirtualHost *:80>
ServerName mail.347media.com
ServerAlias www.mail.347media.com
webmaster webmaster@347media.com
DocumentRoot "D:/server/htdocs/mail"
<Directory "D:/server/htdocs/mail" >
Options Indexes +FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
CustomLog logs/mail.347media.access.log combined
ErrorLog logs/mail.347media.error.log
</VirtualHost>



This is the mail.domain setup.
This is in the vhost httpd.conf.
workable?
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby Izzy » 14. December 2007 04:10

workable?

What you are saying is your localhost (XAMPP) and your main domain are both in the same DocumentRoot?

Might be better if you deleted or renamed the XAMPP index.php file from the htdocs directory and then use your main domain's index file in it's place.

Then your DocumentRoot and <Directory> directive for localhost would be:
"D:/server/htdocs/xampp" - if that is the path you installed XAMPP in.
Accessible now by the URI:
http://localhost/xampp/

This would have the effect of separating the two and then your main domain would still be accessible locally from
http://localhost
The XAMPP Welcome Page, Demos and Information from
http://localhost/xampp

As well as your main domain name for those out on the Internet.
http://347media.com
http://www.347media.com

And whatever you have in your mail subdomain directory.
http://mail.347media.com
http://www.mail.347media.com

But only you can tell if all this works by giving it a try.



If your want a mail server to work with your mail.347media.com then you have to configure your mail server software and your MX records (Mail Exchange) at your domain name registrar or where ever your DNS Zone File is located to reflect this address - just having a subdomain won't do anything except serve the files contained in the <Directory> and DocumentRoot location of the mail subdomain.

Usually you would serve a web-mail script in the mail subdomain just like you would serve a forum script if you had a forum subdomain set up etc.etc.



===========================================
1. The new DeskTopXampp Launch Control for XAMPP / XAMPPlite
Posted by Ridgewood available from Ridgewood'sDTX web site

2. Build Rich AJAX Applications - Faster
TIBCO General Interface Pro Edition but FREE and Open Source
Fully working with NO donations required to get a user/password
===========================================
Izzy
 
Posts: 3344
Joined: 25. April 2006 17:06

Postby geekmaster » 14. December 2007 05:35

I used the configuration I posted and now apache wont even start.
Can you please review my configuration?
That is the only file I touched
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby Izzy » 14. December 2007 05:49

geekmaster wrote:...Can you please review my configuration?...
I think I just did that, didn't I?

You did make a backup of the httpd-vhost.conf file before editing it?

You did return the httpd.conf file you edited back to the defaults ie. from the backup you made of the httpd.conf you edited?

Did you install XAMPP to D:\server ???

If you are having problems starting Apache then do as it tells you in the httpd-vhost.conf file:
# You may use the command line option '-S' to verify your virtual host
# configuration.
At a command console in
xampp\apache\bin\
or where ever your path is to the apache\bin directory
Then type this command at the prompt:
apache -S


===========================================
1. The new DeskTopXampp Launch Control for XAMPP / XAMPPlite
Posted by Ridgewood available from Ridgewood'sDTX web site

2. Build Rich AJAX Applications - Faster
TIBCO General Interface Pro Edition but FREE and Open Source
Fully working with NO donations required to get a user/password
===========================================
Izzy
 
Posts: 3344
Joined: 25. April 2006 17:06

Postby geekmaster » 14. December 2007 06:01

I made backups of everything.
I did install xampp in D:\server not D:\server\xampp.
Code: Select all
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

C:\Users\Danny>cd D:\server\apache\bin

C:\Users\Danny>D:

D:\server\apache\bin>apache -s
apache: illegal option -- s
Usage: apache [-D name] [-d directory] [-f file]
              [-C "directive"] [-c "directive"]
              [-w] [-k start|restart|stop|shutdown]
              [-k install|config|uninstall] [-n service_name]
              [-v] [-V] [-h] [-l] [-L] [-t] [-S]
Options:
  -D name            : define a name for use in <IfDefine name> directives
  -d directory       : specify an alternate initial ServerRoot
  -f file            : specify an alternate ServerConfigFile
  -C "directive"     : process directive before reading config files
  -c "directive"     : process directive after reading config files
  -n name            : set service name and use its ServerConfigFile
  -k start           : tell Apache to start
  -k restart         : tell running Apache to do a graceful restart
  -k stop|shutdown   : tell running Apache to shutdown
  -k install         : install an Apache service
  -k config          : change startup Options of an Apache service
  -k uninstall       : uninstall an Apache service
  -w                 : hold open the console window on error
  -e level           : show startup errors of level (see LogLevel)
  -E file            : log startup errors to file
  -v                 : show version number
  -V                 : show compile settings
  -h                 : list available command line options (this page)
  -l                 : list compiled in modules
  -L                 : list available configuration directives
  -t -D DUMP_VHOSTS  : show parsed settings (currently only vhost settings)
  -S                 : a synonym for -t -D DUMP_VHOSTS
  -t -D DUMP_MODULES : show all loaded modules
  -M                 : a synonym for -t -D DUMP_MODULES
  -t                 : run syntax check for config files

D:\server\apache\bin>apache -S
Syntax error on line 58 of D:/server/apache/conf/extra/httpd-vhosts.conf:
Invalid command 'webmaster', perhaps misspelled or defined by a module not inclu
ded in the server configuration

D:\server\apache\bin>



[edit]
i removed the line where it said
"webmaster webmaster@347media.com"
and apache started, bu twhen i go to mail.347media.com it gives me
Code: Select all
Server error!

The server encountered an internal error and was unable to complete your request. Either the server is overloaded or there was an error in a CGI script.

If you think this is a server error, please contact the webmaster.
Error 500
mail.347media.com
12/14/07 00:06:11
Apache/2.2.6 (Win32) DAV/2 mod_ssl/2.2.6 OpenSSL/0.9.8e mod_autoindex_color PHP/5.2.4

Is this because I have a .htaccess file in that directory that says
Code: Select all
# AddDefaultCharset   UTF-8
AddType text/x-component .htc

<IfModule mod_php4.c>
  php_flag   display_errors   Off
  php_flag   log_errors   On
  php_value   error_log   logs/errors
  php_value   upload_max_filesize   5M
  php_value   post_max_size   6M
</IfModule>

<IfModule mod_php5.c>
  php_flag   display_errors   Off
  php_flag   log_errors   On
  php_value   error_log   logs/errors
  php_value   upload_max_filesize   5M
  php_value   post_max_size   6M
</IfModule>

<FilesMatch "(\.inc|\~)$">
  Order allow,deny
  Deny from all
</FilesMatch>

Order deny,allow
Allow from all
RewriteEngine On
RewriteCond %{THE_REQUEST} mail/
RewriteCond %{HTTP_HOST} !^www.347media.com
RewriteRule (.*) http://mail.347media.com/$1 [L,R=301]
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby Izzy » 14. December 2007 06:08

You will see that the xampp web files are in
D:\server\htdocs\xampp

D:\server\htdocs\ = http://localhost

Minus the XAMPP index.php file in the D:\server\htdocs directory you would need to type in your browser:
http://localhost/xampp
Which is how I have define the virtual host containers - simple really.

You have a problems with reading my posts especially when it comes to case.
D:\server\apache\bin>apache -s

I typed:
apache -S

On the reference link in an earlier post of mine it clearly states:
ServerAdmin serveradmin@domain1.com
Which should have had you type in
ServerAdmin webmaster@347media.com

You seem to making lots of simple errors that Apache is not tolerant at all with.

Server errors are best read in the server's error log.



===========================================
1. The new DeskTopXampp Launch Control for XAMPP / XAMPPlite
Posted by Ridgewood available from Ridgewood'sDTX web site

2. Build Rich AJAX Applications - Faster
TIBCO General Interface Pro Edition but FREE and Open Source
Fully working with NO donations required to get a user/password
===========================================
Izzy
 
Posts: 3344
Joined: 25. April 2006 17:06

Postby geekmaster » 14. December 2007 06:40

Izzy wrote:You will see that the xampp web files are in
D:\server\htdocs\xampp

D:\server\htdocs\ = http://localhost

Minus the XAMPP index.php file in the D:\server\htdocs directory you would need to type in your browser:
http://localhost/xampp
Which is how I have define the virtual host containers - simple really.

You have a problems with reading my posts especially when it comes to case.
D:\server\apache\bin>apache -s

I typed:
apache -S

On the reference link in an earlier post of mine it clearly states:
ServerAdmin serveradmin@domain1.com
Which should have had you type in
ServerAdmin webmaster@347media.com

You seem to making lots of simple errors that Apache is not tolerant at all with.

Server errors are best read in the server's error log.



===========================================
1. The new DeskTopXampp Launch Control for XAMPP / XAMPPlite
Posted by Ridgewood available from Ridgewood'sDTX web site

2. Build Rich AJAX Applications - Faster
TIBCO General Interface Pro Edition but FREE and Open Source
Fully working with NO donations required to get a user/password
===========================================


Sorry.
My English is not so good.
So what you are telling me is that I can go to http://localhost/xampp/ (which is where i am right now) and there is some configuration in there that allows me to set virtualhosts?
Where are those controls?
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby geekmaster » 14. December 2007 06:41

I still dont understand why mail.347media.com is not working if I did nothing wrong in the config file.
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby geekmaster » 14. December 2007 15:30

Did you install XAMPP to D:\server ???

Yes
You have a problems with reading my posts especially when it comes to case.
D:\server\apache\bin>apache -s

I typed:
apache -S

I saw that you said that. That's why you can see in the lines below the mistake that I corrected it and you can see the output.
I removed the webmaster part that was preventing apache from starting, but it still did not fix my issue with mail.347media.com not working.
You will see that the xampp web files are in
D:\server\htdocs\xampp

I don't understand how this is relevant to my subdomain/alias issue.
That fact that you pointed out is obvious as this is how XAMPP comes installed (xampp folder in the htdocs)

My issue here is getting an alias/sub-domain working.
Anyone seeing this thread, please don't dismiss it as resolved because I still don't have an answer.
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby Izzy » 14. December 2007 23:37

Izzy wrote:Server errors are best read in the server's error log.



===========================================
1. The new DeskTopXampp Launch Control for XAMPP / XAMPPlite
Posted by Ridgewood available from Ridgewood'sDTX web site

2. Build Rich AJAX Applications - Faster
TIBCO General Interface Pro Edition but FREE and Open Source
Fully working with NO donations required to get a user/password
===========================================[/quote]
Izzy
 
Posts: 3344
Joined: 25. April 2006 17:06

Postby geekmaster » 15. December 2007 01:01

I'm VERY new to this.
I really need help.
where is the server error log?
geekmaster
 
Posts: 23
Joined: 13. December 2007 14:13

Postby KallistaAEnvarou » 15. December 2007 21:37

xampp\apache\logs\error.log
KallistaAEnvarou
 
Posts: 126
Joined: 02. December 2007 17:33
Location: Cold Cold California

Next

Return to XAMPP for Windows

Who is online

Users browsing this forum: No registered users and 69 guests