ssl.conf - wildcard SSL

Problems with the Windows version of XAMPP, questions, comments, and anything related.

ssl.conf - wildcard SSL

Postby ervand » 15. March 2007 00:45

I bought wildcard certifcate from godaddy.com. I have domain.com with all bunch of subdomains. How do I configure ssl.conf to take account my sub domains? Thank You.
ervand
 
Posts: 4
Joined: 12. March 2007 20:51

SSL and authentication

Postby needindeed » 27. March 2007 14:50

Hi there

Did you manage to figure this out?

FYI I'm also in the process of setting up a secure login for for the first time and still looking for a step-by-step / howto using xampp.

Thanks in advance!
Graeme
needindeed
 
Posts: 2
Joined: 27. March 2007 14:27

Postby WorldDrknss » 28. March 2007 21:52

When ask for Domain name which is used for commonName_default instead of typing www.yourdomain.tld or yourdomain.tld you would use *.yourdomain.tld which will allow your certificate to be used across subdomains.
http://wdguides.org - XAMPP Tutorials & MORE!!!!
User avatar
WorldDrknss
 
Posts: 292
Joined: 17. September 2005 13:40

ssl.conf

Postby ervand » 29. March 2007 20:52

I did do the *.mydomain.com in common name. I just want to know in xampp\apache\conf\ssl.conf how do I do sub domains? Thanks fo all your help. Below is what I have now and I need to add sub domains to it.

#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs-2.0/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
# Note: This must come before the <IfDefine SSL> container to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512

#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443

##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##

#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl

# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin

# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache shmht:logs/ssl_scache(512000)
#SSLSessionCache shmcb:logs/ssl_scache(512000)
SSLSessionCache dbm:logs/ssl_scache
SSLSessionCacheTimeout 300

# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex default

##
## SSL Virtual Host Context
##

<VirtualHost 22.34.230.13:443>
# <VirtualHost 127.0.0.1:443>

# General setup for the virtual host
DocumentRoot C:\Apache\xampp\htdocs\thedvrdepot
ServerName www.mydomain.com
ServerAdmin ervand@mydomain.com
ErrorLog logs/sslerror.log
TransferLog logs/access_log_secured


# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on

# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
# SSLCertificateFile "C:/Apache/xampp/apache/conf/ssl.crt/snakeoil-rsa.crt"
# SSLCertificateFile "C:/Apache/xampp/apache/conf/ssl.crt/server.crt"
SSLCertificateFile "C:/Apache/xampp/apache/conf/ssl.crt/www.mydomain.com.crt"

# SSLCertificateFile "C:/Apache/xampp/apache/conf/ssl.crt/server.csr"
# SSLCertificateFile C:/Apache/conf/ssl.crt/server-dsa.crt

# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# SSLCertificateKeyFile "C:/Apache/xampp/apache/conf/ssl.key/snakeoil-rsa.key"
# SSLCertificateKeyFile "C:/Apache/xampp/apache/conf/ssl.key/server.key"
SSLCertificateKeyFile "C:/Apache/xampp/apache/conf/ssl.key/mydomain.key"
# SSLCertificateKeyFile C:/Apache/conf/ssl.key/server-dsa.key

# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
# SSLCertificateChainFile C:/Apache/xampp/apache/conf/ssl.crt/sf_issuing.crt

# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
# SSLCACertificatePath C:/Apache/conf/ssl.crt
SSLCACertificateFile C:/Apache/xampp/apache/conf/ssl.crt/ca_bundle.crt

# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
# SSLCARevocationPath C:/Apache/conf/ssl.crl
# SSLCARevocationFile C:/Apache/conf/ssl.crl/ca-bundle.crl

# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
# SSLVerifyClient require
# SSLVerifyDepth 10

# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
# <Location />
# SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
# </Location>

# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
# SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php|php5|php4|php3?)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "C:/Apache/xampp/cgi-bin">
SSLOptions +StdEnvVars
</Directory>


# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0

# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host .
# CustomLog C:/Apache/xampp/logs/ssl_request_log \
# "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>
ervand
 
Posts: 4
Joined: 12. March 2007 20:51


Return to XAMPP for Windows

Who is online

Users browsing this forum: No registered users and 106 guests