LEX200 wrote:my smtp don't work
how to configure
I don't know how
help me please
Hello first that you must do it is to verify the protocol that uses the Mail servants are 110 pop3, 25 smtp, 145 imap, soon are port safe for mail servant which I do not go to speak.
You must open these ports for good operation of the mail servant
Necessary the smtp, pop3, therefore verifies if these ports 110.25 are open as much in your router as if you have firewall by software like which it comes integrated in Windows xp.
Pásate by some page of scanner of ports and verifies that these ports are open in router like firewall (important east step).
One made the previous thing you must know as it is your IP publishes your private IP and your DNS
Or supplier of connection to Internet that provides to you
Another one is if single it interests like service to send mail to you in your network with the users of the network who you will have to put the servant Mercury your private IP.
When you know these then data we can begin…
MercuryMail to go to the route of xampp/MercuryMail/mercury.exe
Once it doubles click here executed the administrator of MercuryMail.
Single I activated this in MercuryMail
[General]
Your.dominion.com or [xxx.xxx.xxx.xxx] between parenthesis
Depending on your necessities then you will put your dominion or your private network here
Since there is difference between one and another one when it is your dominion you will be able to command outside as much of your network as towards Internet I have vice versa.
In case that single your necessities are single to give service to your single network you must put your IP deprived of the CPU in as this the mercurymail.
Activating the necessary protocols
[Protocols]
MERCURYS.DLL
MERCURYP.DLL
MERCURYE.DLL
# MERCURYC.DLL
MERCURYD.DLL
# MERCURYH.DLL
# MERCURYF.DLL
# MERCURYW.DLL
# MERCURYX.DLL
# MERCURYI.DLL
# MERCURYB.DLL
[MercuryS]
Debug: 1
Logfile: X \ xxx \ pp \ MERCURYMAIL \ Logs \ MERCURYS.LOG
Size: 5000
Timeout: 30
Relay: 0
Strict_Relay: 1
Allow_Illegals: 0
SMTP_Authentication: 1
Auth_File: tuauth
Killfile: X \ xxx \ pp \ MERCURYMAIL \ MERCURYS.KFL
Session_logging: X \ xxx \ pp \ MERCURYMAIL \ Logs
Session_logmode: 0
Compliance_Settings: 416
Maximum_Failed_Rcpts: 4
Max_Relay_Attempts: 4
SSL_Mode: 0
SSL_Certfile: X \ xxx \ pp \ MercuryMail \ xxx.crt
ST_Blacklisting: 288
No_VRFY: 1
Compliance_Exceptions: X \ xxx \ pp \ MERCURYMAIL \ EXCEPTIONS.TXT
[MercuryP]
Scratch: X \ xxx \ pp \ MERCURYMAIL \ Mercury
Logfile: X \ xxx \ pp \ MERCURYMAIL \ Logs \ MERCPOP~Y~W.LOG
Stack: 32768
Mark_Read: 1
POPAlias_File: alias
SSL_Mode: 0
SSL_Certfile: X:\ xxx \ pp \ MercuryMail \ xxxx.crt
Login_Disabled: 0
Timeout: 60
[MercuryE]
Session_logging: X \ xxx \ pp \ MERCURYMAIL \ Logs
Session_logmode: 0
Poll: 15
Timeout: 60
Nameservers: xxx.xxx.xxx.xxx here your DNS if you want to send email towards outside your network.
Logfile: X \ xxx \ pp \ MERCURYMAIL \ Logs \ SMTPC~Y~M.LOG
Log_Verbose: 0
DNS_Timeout: 20
DNS_Retries: 4
Transcripts: 0
MaxThreads: 10
[MercuryD]
Scratch: X \ xxx \ pp \ MERCURYMAIL \ Mercury
Timeout: 30
Poll: 30
[Domains]
hostname: hostname
hostname: dominion.com
hostname: [xxx.xxx.xxx.xxx]
This is my configuration thinks about elaborating a good configuration I advise to you that you do not put ALLOW RELAY= 1 since they do Spamming to you
For but better security is to have it like I ALLOW RELAY=0
Good I hope that this helps you.