virtual hosts

Problems with the Windows version of XAMPP, questions, comments, and anything related.

virtual hosts

Postby tbl » 05. August 2006 00:26

Hi all.

I have installed xampp and I am gonne have 6 virtual domain and no 'main domain' . I have listed the 6 virtual domain in the httpd-vhosts.conf file , and I have tried both to have the main server configuration info commented and un-commented. I am used to have the main server configuration commented, and just use the virtual hosts.

But I get a 403 error (forbidden) when I try my v.domains , and I have read in other topics here that I have to remove the read-only which are in the folders....but I can't remove it!! I have tried at least 50 times, but everytime it just gets read-only again. I use Windows XP, and I know that it is easier on Windows 2000 with permissions and all

But is there anyone who have an idea here? Cause I don't :lol:

Thanks in advance

-Tommy
tbl
 
Posts: 6
Joined: 05. August 2006 00:09

Postby Wiedmann » 05. August 2006 00:36

But is there anyone who have an idea here?

Not without your httpd-vhosts.conf file.

and I have tried both to have the main server configuration info commented and un-commented

Don't understand.

I have read in other topics here that I have to remove the read-only which are in the folders

No. You must not do this.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby Izzy » 05. August 2006 04:41

First of all before altering any configuration files make a backup of the original so you can revert if you make any mistakes.

Copy and paste your httpd-vhosts.conf file and if you altered the main httpd.conf file copy and paste the relevant parts here that you have changed (inside a Code brace). Someone hear may be able to assist you if we had more accurate detail.

Like this:
[code]paste in your httpd-vhost.conf/httpd.conf file in here[/code]
Izzy
 
Posts: 3344
Joined: 25. April 2006 17:06

Postby dwion » 05. August 2006 12:06

My laborious journey at upgrading XAMPP continues...I'm having the same problem with virtual hosts as described above; getting the same "Access Forbidden..." message when trying to access the home pages of my virtual sites.

From my httpd-conf file:

line 118: Uncommented the rewrite module (need this for my CMSs to use clean URLs)...
Code: Select all
LoadModule rewrite_module modules/mod_rewrite.so


line 177: DocumentRoot is set as (note I'm not using this DocRoot for anything)...
Code: Select all
DocumentRoot "C:/xampp/htdocs"


line 203: I set the default <Directory /> container to the same as DocumentRoot, as the file says to do...
Code: Select all
<Directory "C:/xampp/htdocs/">


line 498: Ensured the httpd-vhosts.conf line was uncommented...
Code: Select all
Include conf/extra/httpd-vhosts.conf



Sample contents of my httpd-vhosts.conf file:

With the following contents I don't get any errors or warnings in the command prompt when I start XAMPP, but I still get the "Access Forbidden..." error if I try and access a site home page.

Code: Select all
NameVirtualHost 127.0.0.1:80

<VirtualHost 127.0.0.1:80>
    DocumentRoot C:/xampp/htdocs
    ServerName localhost
    ServerAdmin admin@localhost
</VirtualHost>

<VirtualHost local.site1.com:80>
   DocumentRoot C:/_txp/site1
   ServerName local.site1.com
   ServerAdmin admin@local.site1.com
   <Directory "C:/_txp/site1">
        Options Indexes FollowSymLinks
        AllowOverride FileInfo
   </Directory>
</VirtualHost>

<VirtualHost local.site2.com:80>
   DocumentRoot C:/_txp/site2
   ServerName local.site2.com
   ServerAdmin admin@local.site2.com
   <Directory "C:/_txp/site2">
        Options Indexes FollowSymLinks
        AllowOverride FileInfo
   </Directory>
</VirtualHost>


If I remove the beginning VirtualHostName line and the first default block (which seems redundant anyway against the httpd-conf file), then I get the following warning in the command prompt when starting XAMPP:

VirtualHost local.site1.com:80 overlaps with VirtualHost local.site2.com:80 The first has precendence, perhaps you need a NameVirtualHost directive.


I've tried reading Apache's docs on Virtual Hosts, but they're not the most understandable.

The only difference between the VirtualHosts above and those that used to work for me in my old XAMPP install is that I had a VirtualHostName line for each VirtualHost block. That worked before. However, I've tried that here too, and it doesn't work, and in any case I don't think I need a separate VirtualHostName for each block, do I?

I'm sure my blocks are wrong, any suggestions? And yes, my Windows hosts file is configured properly to not create DNS conflicts.
dwion
 
Posts: 37
Joined: 29. July 2006 01:40
Location: Strasbourg, France

Postby Izzy » 05. August 2006 13:00

Try adding this to each of the vhosts:
Code: Select all
<Directory "C:/_txp/site1">
Options Indexes FollowSymLinks
AllowOverride FileInfo
Order allow,deny
Allow from all
</Directory>


The default in the httpd.conf is:

# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>

You need to change this behaviour in each vhost block otherwise you will get a 403 error.

2 commands that might come in handy are:
To check the syntax of your httpd-v-host.conf file is:
>apache -S

To check the syntax of the httpd.conf file use:
>apache -t

You appear not to have any syntax errors but the commands help if editing the files and will check them before you restart the server and will give you some clues if apache won't start after editing the conf files.

Some more reading if it helps:
http://www.devshed.com/c/a/Apache/Getti ... 0-Part-II/

Just to add, you can use * in place of the name in all these:
<VirtualHost local.site1.com:80>
<VirtualHost *:80>

NameVirtualHost 127.0.0.1:80
NameVirtualHost *:80

So that any IP will get results. If you have a dynamic IP address from your ISP then this is particularly useful.
Last edited by Izzy on 27. August 2006 01:40, edited 3 times in total.
Izzy
 
Posts: 3344
Joined: 25. April 2006 17:06

Postby dwion » 05. August 2006 13:53

Those Directory mods did the trick Izzy, thank you so much. I'm singing the "Hallaluja" song!

I read those lines in the httpd-conf file as you point out, but to be honest, for someone like me who is not a seasoned veteran with Apache, they're not the most understandable. If the file had your line added to it...

You need to change this behaviour in each vhost block otherwise you will get a 403 error.


I would have understood much better. ;)

Thanks, again, sites are working!
wion.com
-Web standards development
-Content Publishing
-Writing
dwion
 
Posts: 37
Joined: 29. July 2006 01:40
Location: Strasbourg, France

Postby tbl » 06. August 2006 00:59

Hi.

Sorry about my late reply. Here are the things you guys wanted.

and I have tried both to have the main server configuration info commented and un-commented


First of all what I meant with commented and un-commented was this (#) .

Here are the .conf files as requested...I have nothing to hide :D

Code: Select all
#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/xampp/apache" will be interpreted by the
# server as "C:/Program Files/xampp/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild  0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Program Files/xampp/apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule autoindex_module modules/mod_autoindex.so # don't load because of mod_autoindex_color.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_module modules/mod_dav.so
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule ssl_module modules/mod_ssl.so

LoadModule autoindex_color_module modules/mod_autoindex_color.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_remote_module modules/mod_auth_remote.so
#LoadModule sspi_auth_module modules/mod_auth_sspi.so
#LoadModule log_sql_module modules/mod_log_sql.so
#LoadModule log_sql_mysql_module modules/mod_log_sql_mysql.so
#<IfModule ssl_module>
#    LoadModule log_sql_ssl_module modules/mod_log_sql_ssl.so
#</IfModule>
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule xmlns_module modules/mod_xmlns.so
#LoadModule proxy_xml_module modules/mod_proxy_xml.so
#LoadModule bw_module modules/mod_bw.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/Program Files/xampp/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features. 
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/Program Files/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI
   
    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.php4 index.php3 index.cgi index.pl index.html index.htm index.shtml index.phtml
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog logs/access.log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog logs/access.log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/Program Files/xampp/cgi-bin/"

</IfModule>

#
# "C:/Program Files/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Program Files/xampp/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script.  For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:

   #!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file.  Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention.  The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab.  Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
#

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi

    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis

    # For server-parsed imagemap files:
    #AddHandler imap-file map

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
   AddType text/html .shtml
   AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
EnableMMAP off
EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# XAMPP specific settings
Include conf/extra/httpd-xampp.conf

# Server-pool management (MPM specific)
# Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
Include conf/extra/httpd-dav.conf

# Various default settings
Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf

#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>



I guess I didn't have to put the whole file in here, but I did anyway.


Code: Select all
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>
    DocumentRoot c:\vhosts\main
    ServerName www.brueland.net
    ServerAlias brueland.net
</VirtualHost>

##<VirtualHost *:80>
##    ServerAdmin webmaster@dummy-host2.example.com
##    DocumentRoot /www/docs/dummy-host2.example.com
##    ServerName dummy-host2.example.com
##    ErrorLog @rel_logfiledir@/dummy-host2.example.com-error_log
##    CustomLog @rel_logfiledir@/dummy-host2.example.com-access_log common
##</VirtualHost>


And in my hosts file on this computer (not the server) I have this:

Code: Select all
127.0.0.1       localhost
192.168.1.5   www.brueland.net
192.168.1.5   brueland.net



Now I hope that there is someone that can help me :D

Thanks in advance

-Tommy
tbl
 
Posts: 6
Joined: 05. August 2006 00:09

Postby Wiedmann » 06. August 2006 01:28

Now I hope that there is someone that can help me

Now there is no problem with helping you ;-)

The files "httpd.conf" and "HOSTS" are correct.

In your "httpd-vhosts.conf":
Code: Select all
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

If you use "NameVirtualHost" you must define a VHost for your old default server in first place.
Code: Select all
<VirtualHost *:80>
    DocumentRoot "C:/Program Files/xampp/htdocs"
    ServerName localhost:80
</VirtualHost>


Code: Select all
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>
    DocumentRoot "C:/vhosts/main"

Like in the default server config, you must make a Directory-Block for each additional DocumentRoot and must allow access to it.
Code: Select all
    <Directory "C:/vhosts/main">
        Options Indexes FollowSymLinks Includes ExecCGI
        AllowOverride All
        Order allow,deny
        Allow from all
    </Directory>

Code: Select all
    ServerName www.brueland.net:80
    ServerAlias brueland.net
</VirtualHost>
##<VirtualHost *:80>
##    ServerAdmin webmaster@dummy-host2.example.com
##    DocumentRoot /www/docs/dummy-host2.example.com
##    ServerName dummy-host2.example.com
##    ErrorLog @rel_logfiledir@/dummy-host2.example.com-error_log
##    CustomLog @rel_logfiledir@/dummy-host2.example.com-access_log common
##</VirtualHost>


BTW:
Allways use a forward slash in a Apache config file.
Wiedmann
AF Moderator
 
Posts: 17106
Joined: 01. February 2004 12:38
Location: Stuttgart / Germany

Postby tbl » 06. August 2006 11:43

Wiedmann,

Thanks a lot for the help, now it works perfect. I wasn't aware of the forward slashes...I thought that was Linux :) , and I also forgot the (") on the directory. I didn't know about all the Directory info I had to have, but it works like a breeze now. Thanks a lot!

-Tommy
tbl
 
Posts: 6
Joined: 05. August 2006 00:09

Postby CarcaBot » 17. August 2006 00:08

I have a problem,
i have one domain registered and without hosting.
I want to host in my PC (localhost)
i think in my pc is sample to configure, but they does not accept as nameservers only IP and must be a host
how i can make a host to localhost to send him
I have maked already at no-ip.com a domain but, work with him ? i don't tryed...
I sayd this to manny ppl and nobody don't know
thx for help!
CarcaBot
 
Posts: 3
Joined: 17. August 2006 00:01

Postby CarcaBot » 18. August 2006 10:00

nobody know ?
CarcaBot
 
Posts: 3
Joined: 17. August 2006 00:01


Return to XAMPP for Windows

Who is online

Users browsing this forum: No registered users and 50 guests