vermutlich liegt mir ein ganz banales Problem vor. Ich versuche euch nun treffend zu erklären wie es bei mir aussieht.
Also zunächst mal folgendes ich habe genau 2 User eingerichtet einen mit restriktiven Zugang und einen nicht restriktiven Zugang.
Problem bei dem ganzen ist das ich bei beiden User immer in die höheren Ebenen gelange
der restrictive Pfad:
/home/ftpuser/restricted
der nicht restrictive Pfad
/home/ftpuser/notrestricted
Berechtigung ist ausgelagert auf
/etc/proftpd.passwd
/etc/proftpd.group
Meine proftpd.passwd:
- Code: Select all
leecher:jEM9OEwiE7S1k:1001:1001:ftp-user:/home/ftpuser/restricted:/bin/bash
owner:EERMCAE/WXlA.:1002:1002:ftp-user:/home/ftpuser/norestricted:/bin/bash
Meine proftpd.group:
- Code: Select all
restricted:x:1001:
norestricted:x:1002:
Meine proftpd.conf:
- Code: Select all
ServerType standalone
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
AllowOverwrite off
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayFirstChdir .message
ListOptions "-l"
DenyFilter \*.*/
DefaultRoot ~/home/ftpuser/restricted,!restricted
DefaultRoot ~/home/ftpuser/notrestricted,!notrestricted
DefaultChdir ~/home/ftpuser/restricted,!restricted
DefaultChdir ~/home/ftpuser/notrestricted,!notrestricted
AuthUserFile /etc/proftpd.passwd
AuthGroupFile /etc/proftpd.group
# Uncomment this if you are using NIS or LDAP to retrieve passwords:
#PersistentPasswd off
# Uncomment this if you would use TLS module:
#TLSEngine on
# Uncomment this if you would use quota module:
#Quotas on
# Uncomment this if you would use ratio module:
#Ratios on
# Port 21 is the standard FTP port.
Port 21
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User nobody
Group nogroup
<Directory *>
Umask 022 022
HideNoAccess on
HideUser root
<Limit ALL>
IgnoreHidden on
</Limit>
<Limit WRITE>
DenyAll
</Limit>
</Directory>
Meine Verzeichnis Rechte:
- Code: Select all
drwxrwsr-x 5 root staff 4096 2004-08-18 18:05 .
drwxr-xr-x 24 root root 1024 2004-08-17 21:59 ..
drwxr-xr-x 2 bluti bluti 4096 2004-08-18 23:49 bluti
drw------x 5 root root 4096 2004-08-18 22:02 ftpuser
drwxr-xr-x 2 root root 49152 2004-08-17 20:29 lost+found
in ftpuser:
- Code: Select all
drw------x 4 root root 4096 2004-08-19 02:05 .
drwxrwsr-x 5 root staff 4096 2004-08-18 18:05 ..
drwxr-xr-x 2 1002 1002 4096 2004-08-18 22:02 norestricted
drwxr-xr-x 2 1001 1001 4096 2004-08-18 21:49 restricted