Apache Friends Support Forum

Ich bins nochmal,

meine Umgebung läuft jetzt stabil auf Linux, danke für den Tipp!

-closed-

wsl_praktikum wrote:Du musst doch auch nicht wissen was für Verzeichnisse es gibt um mir sagen zu können ob es generelle Unterschiede zwischen Windows und Linux gibt, was die allgemeine htdocs-Struktur angeht

Selbst wenn es die gäbe - Xampp für Windows und Linux "out of the box" läuft ja fehlerfrei. Der Fehler entsteht ja durch das Kopieren Deiner Software. Da kann ich leider nichts zu sagen.

Du musst doch auch nicht wissen was für Verzeichnisse es gibt um mir sagen zu können ob es generelle Unterschiede zwischen Windows und Linux gibt, was die allgemeine htdocs-Struktur angeht. Ich meine die gesamte XAMPP/LAMPP Installation auf Linux unterscheidet sich ja immens von der Windows Variante.(Beispielsweise der Speicherort der Log-Dateien, Es gibt spezifische Ordner, etc.)

Mein ErrorLog sagt jedenfalls folgendes:

[Thu Nov 21 11:24:46 2013] [error] [client 127.0.0.1] File does not exist: /opt/lampp/htdocs/user, referer: http://localhost/

Wie auch immer, an dieser Stelle Danke für deine Mühe!

wsl_praktikum wrote:Habe ich beim Einfügen der htdocs-Struktur etwas nicht beachtet!?

Möglicherweise. Aber das musst Du selbst herausbekommen, ich weiß ja noch nicht einmal, was überhaupt für Verzeichnisse gibt. Wieso schaust Du nicht in den Error Log, der ist genau dafür da und da steht wesentlich genauer drin, was genau schief läuft?!

Ne neuere XAMPP Version als 1.7.7 kann ich nicht nutzen, da es sonst zu Komplikationen mit Drupal kommt...

Habe es jetzt aber auch geschafft XAMPP auf SUSE zu installieren - DB wurde auch erfolgreich importiert und sogar auf die Homepage lässt sich zugreifen

...allerdings nur bedingt.
Die Startseite wird einwandfrei angezeigt, versuche ich aber von hieraus auf der Seite zu navigieren bekomme ich einen "404" "Objekt nicht gefunden"

Habe ich beim Einfügen der htdocs-Struktur etwas nicht beachtet!?
(Ich habe den Ordner aus meiner XAMPP Windows Installation kopiert und 1:1 in den Linux htdocs eingefügt)

wsl_praktikum wrote:Nur komme ich als absoluter Linux Anfänger schon beim entpacken/installieren von XAMPP an meine Grenzen...

Ich habe es gerade noch selbst auf Linux (MInt) installiert - das steht doch alles beschrieben auf der Xampp Seite, genau genommen sind das doch nur ein paar Kommandos. Ich habe aber noch eine bessere Idee:

man muss kein Xampp installieren für einen Webserver, das bringen die Linux Distributionen alles auch so mit. Installiere Apache, MySQL und PHP doch aus dem Linux Paket oder nimm direkt eine "Ubuntu Server" Installation - da ist alles fertig vorinstalliert.

Wenn Du es gar nicht hinbekommst, nimm doch eine neuere Xampp Version und versuche es nochmal unter Windows.

Hey, also da ich noch ne "SUSE Linux Enterprise 11"-ISO rumfliegen hatte, hab ich ne VM erstellt und diese installiert.
Nur komme ich als absoluter Linux Anfänger schon beim entpacken/installieren von XAMPP an meine Grenzen...
Auch die zahlreichen Tutorials haben mir nicht helfen können.
Ich wäre dir sehr dankbar wenn du mir die entsprechenden Befehle, bzw. Schritte nennen könntest um die Umgebung zum laufen zu kriegen, vielen Dank

I have a xampp with php version 5.4.4, how am I gonna upgrade only the php version, into the latest stable release from php.net website?,
what i did was, I downloaded the thread safe binary version of php5.5.6 and extracted it to my xampp directory with a different folder name..
e.g

Code: Select all

c:\xampp\php556


then I opened C:\xampp\apache\conf\extra\httpd-xampp.conf and edited the following lines

Code: Select all

LoadFile "C:/xampp/php556/php5ts.dll"
LoadModule php5_module "C:/xampp/php556/php5apache2_4.dll"

PHPINIDir "C:/xampp/php556"


I tried to restart apache but it won't start at all...so how ?

Das ist von hier aus leider überhaupt nicht zu beurteilen, vielleicht liegt es an einem Fehler in Drupal, vielleicht auch an Windows. Letzteres geschieht dann schnell auch mal durch ein Update, welches bei Windows automatisch eingespielt wird.

Ich würde persönlich versuchen, die Umgebung auf einen Linux Server zu portieren, das läuft in aller Regel stabiler als Windows.

Tag Leute,

ich mach derzeit ein Praktikum im Bereich Webentwicklung. Mein Arbeitgeber verwaltet die Seite mit dem CMS Drupal 6.28.
Nachdem ich die Seite nun gut 4 Monate problemlos mit XAMPP 1.7.7 lokal weiterentwickelt habe, tritt seit kurzem ein
schwerwiegendes Problem auf.

"Apache HTTP Server funktioniert nicht mehr":

Problemereignisame: APPCRASH
Anwendungsname: httpd.exe
Anwendungsversion: 2.2.21.0
Anwendungszeitstempel: 4e6b3136
Fehlermodulname: php5ts.dll
Fehlermodulversion: 5.3.27.0
Fehlermodulzeitstempel: 51ddaf6e
Ausnahmecode: c00000fd
Ausnahmeoffset: 00182999
Betriebsystemversion: 6.0.6002.2.2.0.256.6
Gebietsschema-ID: 1031
Zusatzinformation 1: f1e8
Zusatzinformation 2: d4eb7cf28a4f910486e91a11f70d294f
Zusatzinformation 3: c5b5
Zusatzinformation 4: 9ccb982dfb3c585f916d55623e22981d

Folgendes habe ich versucht um das Problem zu beheben:

Neuinstallation XAMPP 1.7.7
Neuinstallation Drupal 6.28
Downgrade auf PHP 5.3.27

...ohne Erfolg.

Selbst bei einer frischen XAMPP/Drupal Installation ohne jeglichen Content schmiert der Server ab.

schonmal vielen Dank

Altrea wrote:That's an easy check: Is HTTP working from WAN but only SSL not?

Correct, HTTPS seems to work fine from the WAN, but SSL does not. I created my own self-signed ssl cert, which is read fine when I'm on the LAN, so I don't think that's the problem, either. Here are the various configs. Let me know if having anything else would help.

Thanks,
Josh

httpd.conf:

Code: Select all

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "C:/xampp/apache"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
LoadModule cache_disk_module modules/mod_cache_disk.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.so

<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch. 
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin jat255@gmail.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName josh.homenet.org:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
#
<Directory />
    AllowOverride none
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/xampp/htdocs"
<Directory "C:/xampp/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks Includes ExecCGI

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverride All

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \
                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \
                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ".ht*">
    Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</IfModule>

#
# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/xampp/cgi-bin">
    AllowOverride All
    Options None
    Require all granted
</Directory>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl .asp

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mime_magic_module>
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    MIMEMagicFile "conf/magic"
</IfModule>


#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf

# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include conf/extra/httpd-autoindex.conf

# Language settings
Include conf/extra/httpd-languages.conf

# User home directories
Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf
# Implements a proxy/gateway for Apache.
Include "conf/extra/httpd-proxy.conf"
# Various default settings
Include "conf/extra/httpd-default.conf"
# XAMPP settings
Include "conf/extra/httpd-xampp.conf"

# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>

# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>

# XAMPP: We disable operating system specific optimizations for a listening
# socket by the http protocol here. IE 64 bit make problems without this.

AcceptFilter http none

# AJP13 Proxy
<IfModule mod_proxy.c>
<IfModule mod_proxy_ajp.c>
Include "conf/extra/httpd-ajp.conf"
</IfModule>
</IfModule>


httpd-ssl.conf:

Code: Select all

#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
#
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
#          socache_shmcb_module (for default value of SSLSessionCache)

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
#SSLRandomSeed startup file:/dev/random  512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random  512
#SSLRandomSeed connect file:/dev/urandom 512


#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5

#   Speed-optimized SSL Cipher configuration:
#   If speed is your main concern (on busy HTTPS servers e.g.),
#   you might want to force clients to specific, performance
#   optimized ciphers. In this case, prepend those ciphers
#   to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
#   Caveat: by giving precedence to RC4-SHA and AES128-SHA
#   (as in the example below), most connections will no longer
#   have perfect forward secrecy - if the server's key is
#   compromised, captures of past or future traffic must be
#   considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on

#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program (`builtin' is an internal
#   terminal dialog) has to provide the pass phrase on stdout.
#SSLPassPhraseDialog  builtin

#   Inter-Process Session Cache:
#   Configure the SSL Session Cache: First the mechanism
#   to use and second the expiring timeout (in seconds).
#SSLSessionCache "shmcb:C:/xampp/apache/logs/ssl_scache(512000)"
SSLSessionCache "shmcb:C:/xampp/apache/logs/ssl_scache(512000)"
SSLSessionCacheTimeout  300

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

#   General setup for the virtual host
DocumentRoot "C:/xampp/htdocs"
ServerName josh.homenet.org:443
ServerAdmin jat255.NOSPAM@gmail.com
ErrorLog "C:/xampp/apache/logs/error.log"
TransferLog "C:/xampp/apache/logs/access.log"

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on

#   Server Certificate:
#   Point SSLCertificateFile "conf/ssl.crt/server.crt"
#   the certificate is encrypted, then you will be prompted for a
#   pass phrase.  Note that a kill -HUP will prompt again.  Keep
#   in mind that if you have both an RSA and a DSA certificate you
#   can configure both in parallel (to also allow the use of DSA
#   ciphers, etc.)
#   Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
#   require an ECC certificate which can also be configured in
#   parallel.
#SSLCertificateFile "conf/ssl.crt/ssl.crt"
SSLCertificateFile "conf/ssl.crt/server.crt"
#SSLCertificateFile "conf/ssl.crt/server.crt"

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
#   ECC keys, when in use, can also be configured in parallel
#SSLCertificateKeyFile "conf/ssl.key/ssl.key"
SSLCertificateKeyFile "conf/ssl.key/server.key"
#SSLCertificateKeyFile "conf/ssl.key/server.key"

#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile "conf/ssl.crt/server.crt"
#   certificate for convenience.
#SSLCertificateChainFile "c:/Apache24/conf/server-ca.crt"

#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#   Note: Inside SSLCACertificatePath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "c:/Apache24/conf/ssl.crt"
#SSLCACertificateFile "c:/Apache24/conf/ssl.crt/ca-bundle.crt"

#   Certificate Revocation Lists (CRL):
#   Set the CA revocation path where to find CA CRLs for client
#   authentication or alternatively one huge file containing all
#   of them (file must be PEM encoded).
#   The CRL checking mode needs to be configured explicitly
#   through SSLCARevocationCheck (defaults to "none" otherwise).
#   Note: Inside SSLCARevocationPath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "c:/Apache24/conf/ssl.crl"
#SSLCARevocationFile "c:/Apache24/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain

#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10

#   TLS-SRP mutual authentication:
#   Enable TLS-SRP and set the path to the OpenSSL SRP verifier
#   file (containing login information for SRP user accounts).
#   Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
#   detailed instructions on creating this file. Example:
#   "openssl srp -srpvfile c:/Apache24/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "c:/Apache24/conf/passwd.srpv"

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_ssl documentation
#   for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
    SSLOptions +StdEnvVars
</FilesMatch>
<Directory "C:/xampp/apache/cgi-bin">
    SSLOptions +StdEnvVars
</Directory>

#   SSL Protocol Adjustments:
#   The safe and default but still SSL/TLS standard compliant shutdown
#   approach is that mod_ssl sends the close notify alert but doesn't wait for
#   the close notify alert from client. When you need a different shutdown
#   approach you can use one of the following variables:
#   o ssl-unclean-shutdown:
#     This forces an unclean shutdown when the connection is closed, i.e. no
#     SSL close notify alert is sent or allowed to be received.  This violates
#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
#     this when you receive I/O errors because of the standard approach where
#     mod_ssl sends the close notify alert.
#   o ssl-accurate-shutdown:
#     This forces an accurate shutdown when the connection is closed, i.e. a
#     SSL close notify alert is send and mod_ssl waits for the close notify
#     alert of the client. This is 100% SSL/TLS standard compliant, but in
#     practice often causes hanging connections with brain-dead browsers. Use
#     this only for browsers where you know that their SSL implementation
#     works correctly.
#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#   "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
         nokeepalive ssl-unclean-shutdown \
         downgrade-1.0 force-response-1.0

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
CustomLog "C:/xampp/apache/logs/ssl_request.log" \
          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>                                 


httpd-xampp.conf:

Code: Select all

#
# XAMPP settings
#

<IfModule env_module>
    SetEnv MIBDIRS "C:/xampp/php/extras/mibs"
    SetEnv MYSQL_HOME "\\xampp\\mysql\\bin"
    SetEnv OPENSSL_CONF "C:/xampp/apache/bin/openssl.cnf"
    SetEnv PHP_PEAR_SYSCONF_DIR "\\xampp\\php"
    SetEnv PHPRC "\\xampp\\php"
    SetEnv TMP "\\xampp\\tmp"
</IfModule>

#
# PHP-Module setup
#
LoadFile "C:/xampp/php/php5ts.dll"
LoadModule php5_module "C:/xampp/php/php5apache2_4.dll"

<FilesMatch "\.php$">
    SetHandler application/x-httpd-php
</FilesMatch>
<FilesMatch "\.phps$">
    SetHandler application/x-httpd-php-source
</FilesMatch>

#
# PHP-CGI setup
#
#<FilesMatch "\.php$">
#    SetHandler application/x-httpd-php-cgi
#</FilesMatch>
#<IfModule actions_module>
#    Action application/x-httpd-php-cgi "/php-cgi/php-cgi.exe"
#</IfModule>

# disable this until we get SSL working
<IfModule mod_rewrite.c>
    #RewriteEngine On

    # Redirect /xampp folder to https
    #RewriteCond %{HTTPS} !=on
    #RewriteCond %{REQUEST_URI} xampp
    #RewriteRule ^(.*) https://%{SERVER_NAME}$1 [R,L]

    # Redirect /phpMyAdmin folder to https
    #RewriteCond %{HTTPS} !=on
    #RewriteCond %{REQUEST_URI} phpmyadmin
    #RewriteRule ^(.*) https://%{SERVER_NAME}$1 [R,L]

    # Redirect /security folder to https
    #RewriteCond %{HTTPS} !=on
    #RewriteCond %{REQUEST_URI} security
    #RewriteRule ^(.*) https://%{SERVER_NAME}$1 [R,L]

    # Redirect /webalizer folder to https
    #RewriteCond %{HTTPS} !=on
    #RewriteCond %{REQUEST_URI} webalizer
    #RewriteRule ^(.*) https://%{SERVER_NAME}$1 [R,L]

    # Redirect /owncloud folder to https
    #RewriteCond %{HTTPS} !=on
    #RewriteCond %{REQUEST_URI} owncloud
    #RewriteRule ^(.*) https://%{SERVER_NAME}$1 [R,L]
</IfModule>

<IfModule php5_module>
    PHPINIDir "C:/xampp/php"
</IfModule>

<IfModule mime_module>
    AddType text/html .php .phps
</IfModule>

ScriptAlias /php-cgi/ "C:/xampp/php/"
<Directory "C:/xampp/php">
    AllowOverride None
    Options None
    Require all denied
    <Files "php-cgi.exe">
          Require all granted
    </Files>
        AuthType Basic
        AuthUserFile C:\xampp\security\xampp.users
        require valid-user
        SSLRequireSSL   
</Directory>

<Directory "C:/xampp/cgi-bin">
    <FilesMatch "\.php$">
        SetHandler cgi-script
    </FilesMatch>
    <FilesMatch "\.phps$">
        SetHandler None
    </FilesMatch>
        AuthType Basic
        AuthUserFile C:\xampp\security\xampp.users
        require valid-user
</Directory>

<Directory "C:/xampp/htdocs/xampp">
    <IfModule php5_module>
       <Files "status.php">
          php_admin_flag safe_mode off
       </Files>
    </IfModule>
    AllowOverride AuthConfig
    SSLRequireSSL
</Directory>

<IfModule alias_module>
    Alias /security "C:/xampp/security/htdocs/"
    <Directory "C:/xampp/security/htdocs">
        <IfModule php5_module>
          <Files "xamppsecurity.php">
             php_admin_flag safe_mode off
          </Files>
        </IfModule>
        AllowOverride AuthConfig
                AuthType Basic
        AuthUserFile C:\xampp\security\xampp.users
        require valid-user
        SSLRequireSSL
   </Directory>

    Alias /licenses "C:/xampp/licenses/"
    <Directory "C:/xampp/licenses">

        Options +Indexes
        <IfModule autoindex_color_module>
            DirectoryIndexTextColor  "#000000"
            DirectoryIndexBGColor "#f8e8a0"
            DirectoryIndexLinkColor "#bb3902"
            DirectoryIndexVLinkColor "#bb3902"
            DirectoryIndexALinkColor "#bb3902"
        </IfModule>
                AuthType Basic
        AuthUserFile C:\xampp\security\xampp.users
        require valid-user
        SSLRequireSSL
   </Directory>

    Alias /phpmyadmin "C:/xampp/phpMyAdmin/"
    <Directory "C:/xampp/phpMyAdmin">
        AllowOverride AuthConfig
                AuthType Basic
        AuthUserFile C:\xampp\security\xampp.users
        require valid-user
        SSLRequireSSL
    </Directory>

    Alias /webalizer "C:/xampp/webalizer/"
    <Directory "C:/xampp/webalizer">
        <IfModule php5_module>
          <Files "webalizer.php">
             php_admin_flag safe_mode off
          </Files>
        </IfModule>
        AllowOverride AuthConfig
                AuthType Basic
        AuthUserFile C:\xampp\security\xampp.users
        require valid-user
        SSLRequireSSL
    </Directory>
</IfModule>

#
# New XAMPP security concept
#
<LocationMatch "^/(?i:(?:xampp|security|licenses|phpmyadmin|webalizer|server-status|server-info))">
   Order deny,allow
   Deny from all
   Allow from ::1 127.0.0.0/8 \
      fc00::/7 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 \
      fe80::/10 169.254.0.0/16

   ErrorDocument 403 /error/XAMPP_FORBIDDEN.html.var
</LocationMatch>



Hallo,ich hab ein problem,ich hab heute die aktuelle version von xampp geladen also die version 1.8.3-1,wenn ich auf http://localhost/phpmyadmin/ gehen will steht da:
Zugriff verweigert!

Neues XAMPP Sicherheitskonzept:

Der Zugriff auf das angeforderte Verzeichnis ist nur aus dem lokalen Netzwerk möglich.

Diese Einstellung kann in der Datei "httpd-xampp.conf" angepasst werden.

Sofern Sie dies für eine Fehlfunktion des Servers halten, informieren Sie bitte den Webmaster hierüber.
Error 403
localhost
Apache/2.4.4 (Win32) OpenSSL/1.0.1e PHP/5.5.3

wenn ich unter "C:\xampp\apache\conf\extra" gehe und die httpd-xampp.conf öffne steht folgendes drin:

Code: Select all

#
# XAMPP settings
#

<IfModule env_module>
    SetEnv MIBDIRS "C:/xampp/php/extras/mibs"
    SetEnv MYSQL_HOME "\\xampp\\mysql\\bin"
    SetEnv OPENSSL_CONF "C:/xampp/apache/bin/openssl.cnf"
    SetEnv PHP_PEAR_SYSCONF_DIR "\\xampp\\php"
    SetEnv PHPRC "\\xampp\\php"
    SetEnv TMP "\\xampp\\tmp"
</IfModule>

#
# PHP-Module setup
#
LoadFile "C:/xampp/php/php5ts.dll"
LoadModule php5_module "C:/xampp/php/php5apache2_4.dll"

<FilesMatch "\.php$">
    SetHandler application/x-httpd-php
</FilesMatch>
<FilesMatch "\.phps$">
    SetHandler application/x-httpd-php-source
</FilesMatch>

#
# PHP-CGI setup
#
#<FilesMatch "\.php$">
#    SetHandler application/x-httpd-php-cgi
#</FilesMatch>
#<IfModule actions_module>
#    Action application/x-httpd-php-cgi "/php-cgi/php-cgi.exe"
#</IfModule>


<IfModule php5_module>
    PHPINIDir "C:/xampp/php"
</IfModule>

<IfModule mime_module>
    AddType text/html .php .phps
</IfModule>

ScriptAlias /php-cgi/ "C:/xampp/php/"
<Directory "C:/xampp/php">
    AllowOverride None
    Options None
    Require all denied
    <Files "php-cgi.exe">
          Require all granted
    </Files>
</Directory>

<Directory "C:/xampp/cgi-bin">
    <FilesMatch "\.php$">
        SetHandler cgi-script
    </FilesMatch>
    <FilesMatch "\.phps$">
        SetHandler None
    </FilesMatch>
</Directory>

<Directory "C:/xampp/htdocs/xampp">
    <IfModule php5_module>
       <Files "status.php">
          php_admin_flag safe_mode off
       </Files>
    </IfModule>
    AllowOverride AuthConfig
</Directory>

<IfModule alias_module>
    Alias /security "C:/xampp/security/htdocs/"
    <Directory "C:/xampp/security/htdocs">
        <IfModule php5_module>
          <Files "xamppsecurity.php">
             php_admin_flag safe_mode off
          </Files>
        </IfModule>
        AllowOverride AuthConfig
        Require all granted
   </Directory>

    Alias /licenses "C:/xampp/licenses/"
    <Directory "C:/xampp/licenses">
        Options +Indexes
        <IfModule autoindex_color_module>
            DirectoryIndexTextColor  "#000000"
            DirectoryIndexBGColor "#f8e8a0"
            DirectoryIndexLinkColor "#bb3902"
            DirectoryIndexVLinkColor "#bb3902"
            DirectoryIndexALinkColor "#bb3902"
        </IfModule>
        Require all granted
   </Directory>

    Alias /phpmyadmin "C:/xampp/phpMyAdmin/"
    <Directory "C:/xampp/phpMyAdmin">
        AllowOverride AuthConfig
        Require all granted
    </Directory>

    Alias /webalizer "C:/xampp/webalizer/"
    <Directory "C:/xampp/webalizer">
        <IfModule php5_module>
          <Files "webalizer.php">
             php_admin_flag safe_mode off
          </Files>
        </IfModule>
        AllowOverride AuthConfig
        Require all granted
    </Directory>
</IfModule>

#
# New XAMPP security concept
#
<LocationMatch "^/(?i:(?:xampp|security|licenses|phpmyadmin|webalizer|server-status|server-info))">
   Order deny,allow
   Deny from all
   Allow from ::1 127.0.0.0/8 \
      fc00::/7 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 \
      fe80::/10 169.254.0.0/16

   ErrorDocument 403 /error/XAMPP_FORBIDDEN.html.var
</LocationMatch>



was muss ich tun?

I have followed the following steps in http://bytehash.appspot.com/2012/02/Installing-imagick-for-php-in-windows-under-xampp i have downloaded the dll file for imagick and added this into xampp/php/ext folder and included it as follows: extension=php_imagick_ts.dll. I have also installed imagemagick and can confirm it is installed as i have run the following command:

Code: Select all

C:\>convert -version
Version: ImageMagick 6.8.6-8 20
Copyright: Copyright (C) 1999-2
Features: DPC OpenMP
Delegates: bzlib djvu fftw font
ngo png ps tiff webp x xml zlib

when i restart apache through the xampp control panel the following errors come up:

Code: Select all

the procedure entry point php_checkuid_ex could not be located in the dynamic link library php5ts.dll

and the following error message proceeds after:

Code: Select all

PHP Startup: Unable to load dynamic library "C:\xampp\php\ext\php_imagick_ts.dll" - The specified procedure could not be found

If after this message i try to copy and paste the dynamic link library location - C:\xampp\php\ext\php_imagick_ts.dll and paste it into a document address bar it try to open the file

has anyone come accross this error? as i had the same issue when trying to install msql3 library or just simply uncommenting some of the other extensions in the php.ini file

Any advice would be great. Thanks

apache was running a while ago until netbeans started. Now it refuse to start ,
Error: Apache shutdown unexpectedly.
10:58:05 AM [Apache] This may be due to a blocked port, missing dependencies,
10:58:05 AM [Apache] improper privileges, a crash, or a shutdown by another method.
10:58:05 AM [Apache] Press the Logs button to view error logs and check
10:58:05 AM [Apache] the Windows Event Viewer for more clues
10:58:05 AM [Apache] If you need more help, copy and post this
10:58:05 AM [Apache] entire log window on the forums

i checked the ports and non of pid using 80 or 443. No error reports available and when initiate apache_start.bat it display the below...

Diese Eingabeforderung nicht waehrend des Running beenden
Bitte erst bei einem gewollten Shutdown schliessen
Please close this command only for Shutdown
Apache 2 is starting ...
httpd.exe: Syntax error on line 514 of C:/xampp/apache/conf/httpd.conf: Syntax e
rror on line 17 of C:/xampp/apache/conf/extra/httpd-xampp.conf: Cannot load C:/x
ampp/php/php5ts.dll into server: The specified module could not be found.

Apache konnte nicht gestartet werden
Apache could not be started
Press any key to continue . . .

Please give a solution !

Diese Eingabeforderung nicht waehrend des Running beenden
Bitte erst bei einem gewollten Shutdown schliessen
Please close this command only for Shutdown
Apache 2 is starting ...
httpd.exe: Syntax error on line 514 of C:/xampp/apache/conf/httpd.conf: Syntax e
rror on line 17 of C:/xampp/apache/conf/extra/httpd-xampp.conf: Cannot load /xam
pp/php/php5ts.dll into server: Die angegebene Prozedur wurde nicht gefunden.

Apache konnte nicht gestartet werden
Apache could not be started
Drücken Sie eine beliebige Taste . . .